Manuals+

GLEDOPTO GL-C-601P

GLEDOPTO GL-C-601P ZigBee 3.0 Pro Max 5-in-1 LED Controller User Manual

Model: GL-C-601P

1. Introducció

The GLEDOPTO GL-C-601P ZigBee 3.0 Pro Max 5-in-1 LED Controller is a versatile smart lighting solution designed for controlling various LED strip types. It supports RGBCCT, RGBW, RGB, CCT, and Dimmer modes, offering comprehensive control over your lighting environment. Operating on the ZigBee 3.0 protocol, it ensures stable connectivity with a wide range of smart home platforms.

Les característiques clau inclouen:

  • Whole-Home Integration: Compatible with ZigBee-certified hubs such as Philips Hue, Amazon Echo Plus, Homey, Conbee II, and SmartThings for seamless smart home integration.
  • Vol. Amplitage Suport: Works with 5–24V PWM dimmable LED strips.
  • Seguretat millorada: Features a user-replaceable 20A pluggable fuse for robust protection against overcurrent and short circuits.
  • Opcions de control flexibles: Control via your ZigBee network using a smartphone app or voice assistant (e.g., Amazon Alexa). Can also be paired with an optional GLEDOPTO 2.4G RF remote for standalone functionality.
  • Instal·lació sense esforç: Equipped with redesigned WAGO push-in connectors for quick, screwless wiring. Offers three power input types: V+/V- terminal, DC5.5×2.1mm jack, and Type-C port.
  • Il·luminació personalitzada: Innovative Mix mode allows blending color and white light, with 16 million hues and a 2700K–6500K temperature range adjustable via app, voice, remote, or the tactile push switch.

2. Informació de seguretat

Si us plau, llegiu i comprengui totes les instruccions de seguretat abans de la instal·lació i l'ús. Si no segueix aquestes instruccions, es poden produir descàrregues elèctriques, incendis o altres perills.

  • This device is designed for use with DC 5-24V PWM dimmable LED strip lights only. Do NOT use with Addressable RGBIC LED strips.
  • Assegureu-vos que la font d'alimentació voltage matches the requirements of your LED strip and controller (DC 5-24V).
  • Desconnecteu sempre l'alimentació abans d'instal·lar o fer el manteniment del controlador.
  • The controller includes a user-replaceable 20A fuse for protection. If the fuse blows, replace it with a fuse of the same rating.
  • This device requires a standard ZigBee gateway (e.g., Philips Hue, Amazon Echo Plus, Homey, Conbee II, SmartThings) for smart home integration.
  • If no ZigBee gateway is available, a GLEDOPTO 2.4G RF remote control or wall switch is required for operation. This device is only compatible with the GLEDOPTO 2.4G RF remote control.
  • Keep the device away from water, moisture, and extreme temperatures (-20°C to 45°C).
  • Do not attempt to disassemble or modify the controller beyond replacing the fuse.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

  • 1x ZigBee 3.0 Five in One LED Controller Pro Max (GL-C-601P)
  • 1 x manual d'usuari
  • 1x 3cm Sticker
  • 1x 20A Pluggable Fuse (pre-installed or spare)
Diagram showing the contents of the GLEDOPTO GL-C-601P package: packaging box, 3cm sticker, user instruction, 5A pluggable fuse, and the Zigbee Pro Max 5 in 1 Smart LED Controller.
Figura 3.1: Contingut del paquet

4. Especificacions

Paràmetre Valor
Model núm. GL-C-601P
Entrada Voltage DC 5-24V
Corrent total de sortida 15 A màx
Corrent de sortida/Canal 10 A màx
Tipus C Voltage 5V
Corrent tipus C 3 A màx
Màx. Potència de càrrega 360W
Tarifa de l'IP IP20
Material PC ignífug
Pes net (NW) 70.8 g
Pes brut (GW) 81.6 g
Dimensions (L*W*H) 129 x 50 x 23 mm
Temperatura de funcionament -20 °C a 45 °C
Distància Remota 30 m
Mode de connexió ZigBee 3.0
Applicable Lights RGBCCT, RGBW, RGB, WWCW Dimmer LED Strip Light
Mètode controlat APP, Voice, 2.4G RF Remote
Certificacions CCC, CE, EMC, FCC, LVD, ROHS
Garantia 2 Anys
Diagram showing the product structure and size of the GLEDOPTO GL-C-601P controller, with dimensions 129mm length, 50mm width, and 23mm height. Labels indicate the 20A fuse, output wiring terminal, indicator, Opt button, Reset button, DC/Type-C port, and V+/V- input.
Figure 4.1: Product Structure and Size
Table of product parameters for the GLEDOPTO GL-C-601P controller, listing Model No., Input Voltage, Total Output Current, Output Current/Channel, Type-C Voltage, Type-C Current, IP Rate, Material, N.W., G.W., Size, and Operating Temperature.
Figura 4.2: Paràmetres detallats del producte
Comparison table of wireless protocols: Zigbee 3.0, Wifi, and Bluetooth, showing differences in power consumption, stability, anti-interference ability, security & privacy, and number of product connections.
Figure 4.3: Wireless Protocol Comparison

5. Configuració

5.1 Power Input Methods

The controller offers three convenient ways to connect power:

  1. V+/V- Power Interface: Standard screw terminals for direct wire connection.
  2. 5.5x2.1mm DC Socket: For use with a standard DC power adapter.
  3. Interfície tipus C: For 5V power input, typically from a USB wall adapter (not PC USB).
Diagram illustrating the three input methods for the GLEDOPTO GL-C-601P controller: V+/V- power interface, 5.5x2.1mm DC Socket, and Type-C interface.
Figure 5.1: Three Power Input Methods

5.2 Esquema de cablejat

Connect your LED strip to the output terminals according to the type of strip you are using. The controller supports RGBCCT, RGBW, RGB, CCT, and Dimmer configurations. Ensure correct polarity (V+ and V-) and channel connections (R, G, B, W, C, V-).

Detailed wiring diagram for the GLEDOPTO GL-C-601P controller, showing connections for RGB CCT, RGBW, RGB, CCT, and Dimmer LED strips. Each configuration illustrates the required DC power supply and the specific output terminals to use for each color channel.
Figure 5.2: Wiring Diagram for Various LED Strip Types

5.3 ZigBee Gateway Pairing

To integrate the controller into your smart home system, you will need a compatible ZigBee gateway (e.g., Philips Hue Bridge, Amazon Echo Plus, Homey, Conbee II, SmartThings). Follow the instructions provided by your specific ZigBee gateway to add a new device. The controller will typically enter pairing mode automatically when powered on for the first time or after a reset.

Resetting the Controller for Pairing: If the controller does not pair, or if you wish to pair it with a new gateway, long press the 'Reset' button on the device for 5 seconds until the indicator light changes, signaling it is ready for pairing.

6. Instruccions de funcionament

The GL-C-601P controller offers multiple ways to control your LED strips:

6.1 Key Functions on the Device

Diagram showing the key functions of the GLEDOPTO GL-C-601P controller: Reset button, Opt button, Push button, and Indicator light. Descriptions for short press and long press actions are provided for each button.
Figure 6.1: Controller Key Functions
  • Botó de restabliment:
    • Short press: Switches the frequency (see Section 6.4).
    • Long press (5 seconds): Resets the controller to factory settings, useful for pairing.
  • Opt Button:
    • Short press: Switches the current device function/mode (e.g., RGBCCT, RGBW, RGB, CCT, Dimmer).
    • Long press (5 seconds): Accesses power-on status settings (see Section 6.3).
  • Polsador:
    • Short press: Powers the LED strip On/Off.
    • Long press: Adjusts brightness. (Long press increases brightness; release and long press again decreases brightness).
  • Llum indicadora: Displays different colors corresponding to the current operating mode.

6.2 Five Mode Switching

The controller supports five distinct modes for different LED strip types. Short press the 'Opt' button to cycle through these modes:

  • RGBCCT
  • RGBW
  • RGB
  • CCT (temperatura de color)
  • Dimmer
Diagram illustrating the five mode switching capability of the GLEDOPTO GL-C-601P controller. Icons represent RGB CCT, RGBW, RGB, CCT, and Dimmer modes. A short press of the 'Opt' button switches the current device mode.
Figure 6.2: Five Mode Switching

6.3 Funció de memòria d'apagada

The controller offers two optional power-on behaviors after a power failure:

  1. Remember State: The lights will return to their last on/off state and brightness/color settings.
  2. Lights Up by Default: The lights will turn on to a default setting (e.g., full brightness white) regardless of their state before power loss.

To switch between these modes, long press the 'Opt' button for more than 5 seconds. The indicator light will flash blue 3 times to confirm the change.

Illustration of the power-off memory function, showing two modes: 'Remember the state of the on/off before power failure' and 'Lights up by default when powered on'. Instructions indicate long pressing the 'Opt' key for more than 5 seconds and observing the indicator light flashing blue 3 times.
Figura 6.3: Funció de memòria d'apagada

6.4 Paràmetres de freqüència

The controller allows for one-touch frequency switching to adapt to different power supplies and reduce noise. Short press the 'Reset' button to cycle through the frequencies:

Freqüència Flaixos
600 Hz 1 cop
800 Hz 2 vegades
1000 Hz 3 vegades
2000 Hz 4 vegades
4000 Hz 5 vegades
8000 Hz 6 vegades
Diagram showing frequency settings for the GLEDOPTO GL-C-601P controller. It lists frequencies from 600Hz to 8000Hz and the corresponding number of indicator light flashes. Instructions mention one-touch frequency switching using the Reset button.
Figure 6.4: Frequency Settings

6.5 Control d'aplicacions

Once paired with a ZigBee gateway, you can control the LED strip via your smart home app. This typically allows for:

  • Adjusting 16 million colors.
  • Setting brightness levels (1% to 100%).
  • Adjusting color temperature (2700K–6500K).
  • Creating and activating custom scenes.
Screenshot of a mobile app interface for controlling LED lighting, showing color wheel, brightness slider, and color temperature adjustment. This demonstrates how to set the right ambiance with 16 million colors, adjustable brightness, and color temperature.
Figura 6.5: Interfície de control de l'aplicació

6.6 Control de veu

With a compatible ZigBee gateway and voice assistant (e.g., Amazon Alexa), you can control your lights using voice commands. Examples inclouen:

  • "Alexa, encén el llum de la sala d'estar."
  • "Alexa, set to purple."
  • "Alexa, increase to 70%."
Image demonstrating voice control with Amazon Alexa and Google Home devices, showing example commands like 'Turn on the living room light', 'set to purple', and 'increase to 70%'. Also shows a 2.4G RF remote control for scene memory functions.
Figura 6.6: Integració del control per veu

6.7 2.4G RF Remote Control (Optional)

If you are using a GLEDOPTO 2.4G RF remote control (sold separately), you can control the LED strip directly without a ZigBee gateway. The remote typically offers:

  • Control d'encesa/apagada.
  • Brightness and color adjustments.
  • Scene memory functions (S1, S2, S3, S4 buttons). Long press a scene button to save the current settings; short press to activate a saved scene.

6.8 Mix Mode (RGB + White Light)

The Mix mode allows you to blend RGB colors with white light for unique lighting effects. This is particularly useful for RGBCCT and RGBW strips.

  • When the color loop in your app moves to the edge, only the RGB light turns on.
  • When the color loop moves to the middle, both the RGB light and White light turn on together, allowing for richer, more nuanced colors.
Illustration of RGB+White Light Mix mode. The top image shows the app color wheel with the selector at the edge, resulting in only RGB light. The bottom image shows the selector in the middle, resulting in both RGB and White light turning on together.
Figure 6.7: RGB+White Light Mix Mode

7. Manteniment

  • Neteja: Gently wipe the controller with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
  • Medi ambient: Ensure the controller is installed in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture.
  • Substitució de fusibles: If the LED strip stops working, check the 20A pluggable fuse. If it is blown, replace it with a new fuse of the same rating (20A). Always disconnect power before replacing the fuse.

8. Solució De Problemes

Problema Causa possible Solució
LED strip not turning on.
  • Sense energia al controlador.
  • Cablejat incorrecte.
  • Fusible cremat.
  • LED strip faulty.
  • Comproveu l'alimentació i les connexions.
  • Verifiqueu el cablejat segons la secció 5.2.
  • Check and replace the 20A fuse if necessary.
  • Test the LED strip with another power source if possible.
Controller not responding to app/voice commands.
  • Not paired with ZigBee gateway.
  • Weak ZigBee signal.
  • Gateway/app issue.
  • Ensure controller is paired with your ZigBee gateway (Section 5.3).
  • Move controller closer to the gateway or use a ZigBee repeater.
  • Restart your ZigBee gateway and smart home app.
El comandament a distància no funciona.
  • Comandament a distància no emparellat.
  • Remote battery low/dead.
  • Incorrect remote type.
  • Ensure the GLEDOPTO 2.4G RF remote is correctly paired.
  • Substituïu la bateria del comandament.
  • Confirm you are using a GLEDOPTO 2.4G RF remote control.
Colors/brightness not adjusting correctly.
  • Mode incorrecte seleccionat.
  • Problema de cablejat.
  • LED strip type mismatch.
  • Short press the 'Opt' button to cycle through modes and select the correct one for your LED strip.
  • Check output wiring for correct channel connections.
  • Ensure your LED strip is compatible with the selected mode (e.g., RGBW strip in RGBW mode).

9. Consells d'usuari

  • Comprovació de compatibilitat: Always verify that your existing ZigBee gateway and LED strip type are compatible with the GL-C-601P controller before installation.
  • Intensitat del senyal: For optimal performance, ensure the controller is within a reasonable range of your ZigBee gateway or a ZigBee repeater to maintain a strong signal.
  • Font d'alimentació: Use a stable and appropriately rated DC power supply (5-24V) that matches the total wattage requirements of your LED strip.

10. Garantia i Suport

The GLEDOPTO GL-C-601P ZigBee 3.0 Pro Max 5-in-1 LED Controller comes with a 2 any de garantia des de la data de compra, cobrint defectes de fabricació en condicions d'ús normal.

For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Provide your model number (GL-C-601P) and a detailed description of the issue for faster assistance.

Documents relacionats - GL-C-601P

Preview GLEDOPTO Zigbee 3in1/5in1 LED Smart Controller Pro+ User Manual
Comprehensive user instructions for GLEDOPTO Zigbee 3in1 and 5in1 LED Smart Controller Pro+ (GL-C-201P, GL-C-202P). Covers specifications, setup, gateway connection, Zigbee and RF pairing, wiring, and troubleshooting.
Preview GLEDOPTO Zigbee 5in1 LED Smart Controller Pro Max User Instruction
Detailed user instruction manual for the GLEDOPTO Zigbee 5in1 LED Smart Controller Pro Max (Model GL-C-I-601P). Covers specifications, button functions, indicator lights, reset methods, gateway and RF remote pairing, wiring diagrams, power-on status, and frequency settings.
Preview GLEDOPTO ZigBee Controller Pro User Instruction & RGB+CCT Remote Control Guide
Comprehensive user manual for the GLEDOPTO ZigBee Controller Pro and RGB+CCT Remote Control (GL-RC-006Z). Covers features, wiring, gateway connection, reset procedures, remote control operation, mode descriptions, and compatibility with major smart home systems like Philips Hue, Amazon Echo Plus, and SmartThings.
Preview GLEDOPTO GL-C-601P ZigBee 5in1 LED Smart Controller Pro Max User Manual
User manual for the GLEDOPTO GL-C-601P ZigBee 5in1 LED Smart Controller Pro Max. Provides specifications, setup instructions, wiring diagrams, pairing guides, and troubleshooting for RGBCCT, RGBW, RGB, CCT, and Dimmer LED strips.
Preview Gledopto Zigbee Controller Pro User Manual and Compatibility Guide
User instructions for the Gledopto Zigbee Controller Pro, including wiring diagrams, gateway compatibility, and remote control pairing. Learn how to connect and operate your Gledopto Zigbee devices with various smart home systems.
Preview GLEDOPTO LED Dimmer Controller Pro User Instruction
User instructions for the GLEDOPTO LED Dimmer Controller Pro (GL-C-009P), detailing wire connections, gateway pairing, reset procedures, and remote control compatibility.