Philips SHM5178 Business Wireless Earphones

Introducció

Thank you for choosing the Philips SHM5178 Business Wireless Earphones. These open-top single-ear headphones are designed for comfort and clear communication, featuring Bluetooth 5.3 connectivity, an HD microphone with ENC noise reduction, and long battery life. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.

Contingut del paquet

Si us plau, comproveu que tots els articles estiguin presents al vostre paquet:

• Philips SHM5178 Wireless Earphone
• Manual d'usuari
• USB Type-C Adapter / Charging Cable

Producte acabatview

The Philips SHM5178 features an ergonomic ear-hook design for comfortable, pressure-free wear. The adjustable microphone allows for use on either the left or right ear.

Controls i indicadors

The earphone features a function key, a mute key, and a volume up/down push rod for easy control of calls and media playback.

Configuració

1. Càrrega dels auriculars

Before first use, fully charge the earphones. Connect the supplied USB Type-C charging cable to the earphone's charging port and a power source. A full charge takes approximately 2 hours.

2. Vinculació amb un dispositiu Bluetooth

1. Assegureu-vos que els auriculars estiguin carregats.
2. Turn on the Bluetooth function on your mobile phone or other Bluetooth device.
3. Power on the Philips SHM5178 earphones. They should automatically enter pairing mode (indicated by a flashing LED, if available).
4. On your device, search for Bluetooth devices and select "Philips SHM5178" from the list.
5. Once connected, the earphone's indicator light will change (e.g., solid blue) and you may hear a confirmation tone.

3. Connecting Two Mobile Phones Simultaneously

The Philips SHM5178 supports simultaneous connection to two devices, allowing for seamless switching between calls and media.

Instruccions de funcionament

Encès/Apagat

• Encès: Press and hold the Function key for a few seconds until the indicator light turns on.
• Apagar: Press and hold the Function key for a few seconds until the indicator light turns off.

Gestió de trucades

• Respondre/Finalitzar la trucada: Press the Function key once.
• Rebutja la trucada: Press and hold the Function key for approximately 2 seconds.
• Silenciar/activar el micròfon: Press the Mute key during a call.

Control de volum

• Augmenta el volum: Push the volume rod upwards.
• Disminueix el volum: Push the volume rod downwards.

Reproducció de música

• Reproduir/pausa: Press the Function key once.
• Pista següent: Double-press the Function key.
• Pista anterior: Triple-press the Function key.

Manteniment

• Neteja: Netegeu els auriculars amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
• Cura de la bateria: To prolong battery life, avoid fully discharging the earphones frequently. Charge them regularly, especially if not used for extended periods.
• Resistència a l'aigua: The earphones are IPX4 splash resistant, meaning they can withstand splashes of water from any direction. They are not fully waterproof and should not be submerged in water or exposed to heavy rain.
• Emmagatzematge: Guardeu els auriculars en un lloc fresc i sec, allunyat de temperatures extremes i de la llum solar directa.

Resolució de problemes

If you encounter issues with your Philips SHM5178 earphones, please refer to the following common problems and solutions:

• The Bluetooth earphones cannot be turned on.
  - The battery may be low. Charge the earphones fully.
• Bluetooth earphones cannot pair with Bluetooth devices.
  - Ensure the Bluetooth function is enabled on your device. Turn on your Bluetooth device and activate its Bluetooth function before powering on the headphones.
• Unable to pair (previously connected devices).
  - Ensure that any previously connected Bluetooth devices have their Bluetooth function disabled. Go to your Bluetooth device's settings and remove "Philips SHM5178” from the Bluetooth list, then attempt to pair again.
• The sound quality is poor, or you hear popping sounds.
  - The Bluetooth device might be out of the connection range. Shorten the distance between the headphones and your Bluetooth device, or remove any obstacles between them. Ensure the earphones are sufficiently charged.
• Mobile phone transmission is slow, or audio transmission is impossible/poor quality.
  - Ensure your phone supports not only (mono) HFP but also A2DP, and is compatible with BT4.0x (or a higher version). Refer to your phone's technical specifications.

Especificacions

Consells per a l'usuari

• For optimal sound quality and stable connection, always ensure your earphones are fully charged and within the recommended Bluetooth range (<10m) of your paired device.
• If experiencing pairing issues, try removing the earphones from your device's Bluetooth history before attempting to reconnect.
• Regularly clean your earphones with a soft, dry cloth to maintain hygiene and performance.
• Avançanttage of the adjustable microphone to find the most comfortable and effective position for clear calls, whether you wear it on your left or right ear.

Garantia i Suport

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the point of purchase or contact your retailer/manufacturer directly. Keep your proof of purchase for any warranty claims.