1. Introducció
Thank you for choosing the WONEGG Dual Power Automatic Egg Incubator. This intelligent incubator is designed to provide optimal conditions for hatching various types of poultry and reptile eggs, featuring automatic temperature control, water refilling, and egg turning. Its dual power supply ensures continuous operation, offering high productivity and ease of use for both home and farm applications. Please read this manual thoroughly before operating the incubator to ensure safe and efficient use.
2. Instruccions de seguretat
- Connecteu sempre la incubadora a una presa de corrent amb connexió a terra.
- Do not immerse the incubator or its electrical components in water or any other liquid.
- Keep the incubator away from direct sunlight, heat sources, and drafts.
- Ensure proper ventilation around the incubator.
- Unplug the incubator from the power source before cleaning or performing any maintenance.
- Mantenir fora de l'abast dels nens i mascotes.
- Utilitzeu només el volum especificattage (12V/110V/220V/12V+220V) for operation.
3. Producte acabatview
3.1 Components
The WONEGG Egg Incubator consists of the following main components:
- Unitat principal: Houses the control panel, heating elements, and fan.
- Safates d'ous: Rolling egg trays designed for automatic egg turning.
- Water Bottles/Channels: For automatic water refilling and humidity control.
- Cables d'alimentació: For connecting to 110V/220V AC and 12V DC power sources.
- PCB Board, Motor, Heating Plate, Fan: Core internal components.
3.2 Tauler de control
The incubator features an intuitive digital control panel for monitoring and adjusting settings.
Indicadors de visualització:
- Temperatura: Shows current internal temperature.
- Humitat: Shows current internal humidity level.
- Dia: Displays the current incubation day.
Botons i funcions:
- Quick Menu Button: Accesses various settings.
- Configuració de la temperatura: Press once to adjust temperature.
- Egg Turning Test: Press and hold for 3 seconds to initiate an egg turning test.
- Configuració dels dies d'eclosió: Press once to set the number of incubation days.
- Egg Candler: Press and hold for 3 seconds to activate the LED egg candler.
- Reset Before Each Incubation: Press and hold both the 'Temperature Setting' and 'Hatch Days Setting' buttons for 3 seconds to reset all settings for a new incubation cycle.
4. Configuració
4.1 Muntatge
The incubator is designed for easy assembly. Refer to Figure 2 for a visual guide.
- Desembaleu tots els components amb cura.
- Assemble the base unit and ensure all connections are secure.
- Place the water tray into the base.
- Install the rolling egg trays. The multi-layer structure allows for stacking additional trays if purchased separately.
- Place the top cover with the control panel onto the assembled unit.
4.2 Water Filling and Humidity
Maintaining proper humidity is crucial for successful hatching.
- Fill the provided water bottles with clean, distilled water.
- Insert the water bottles into the designated ports on the side of the incubator. The automatic water refill system will maintain the water level in the channels of the water tray.
- Monitor the humidity display on the control panel and adjust water levels as needed.
4.3 Egg Placement
The adjustable egg trays accommodate various egg sizes.
- Carefully place the fertilized eggs into the rolling egg trays. Ensure they are positioned correctly for the automatic turning mechanism.
- Adjust the spacing of the egg rollers if necessary to fit different egg sizes (e.g., chicken, duck, goose, quail, parrot, pigeon).
4.4 Connexió d'alimentació
The incubator supports dual power input.
- Connect the appropriate power cable (110V/220V AC or 12V DC) to the incubator and a suitable power source.
- The dual power feature allows for continuous operation even during power outages if a 12V battery backup is connected.
5. Instruccions de funcionament
5.1 Initial Power-On and Pre-heating
- After connecting power, the incubator will power on and display current temperature and humidity.
- Allow the incubator to pre-heat for at least 2-4 hours to stabilize the internal temperature and humidity before placing eggs.
5.2 Setting Temperature and Hatch Days
- Configuració de la temperatura: Press the 'Quick Menu' button once. Use the '+' and '-' buttons to adjust the desired temperature. Press 'Quick Menu' again to confirm.
- Configuració dels dies d'eclosió: Press the 'Quick Menu' button twice. Use the '+' and '-' buttons to set the total number of incubation days. Press 'Quick Menu' again to confirm.
5.3 Automatic Egg Turning
The incubator automatically turns eggs to ensure even heating and development.
- The eggs are turned every two hours for optimal development.
- The integrated transmission shaft ensures reliable turning.
- Nota: Automatic egg turning should be stopped in the last 4 days of incubation to prepare for hatching.
5.4 Egg Candling
Use the built-in LED candler to check egg development.
- Press and hold the 'Egg Candler' button for 3 seconds to activate the LED light.
- Place an egg over the light to observe the embryo's development and identify infertile or necrotic eggs.
5.5 Resetting for New Incubation
- Before starting a new batch of eggs, reset the incubator by pressing and holding both the 'Temperature Setting' and 'Hatch Days Setting' buttons for 3 seconds.
5.6 Producte acabatview Vídeo
6. Manteniment
6.1 Neteja
Regular cleaning is essential for hygiene and optimal performance.
- Unplug the incubator before cleaning.
- The detachable design (refer to Figure 2) makes cleaning convenient. Disassemble the egg trays and water tray.
- Clean all parts with a mild disinfectant solution and warm water. Rinse thoroughly and dry completely before reassembly.
- Netegeu la unitat principal i el tauler de control amb un anunciamp tela. No utilitzeu netejadors abrasius.
6.2 Emmagatzematge
- When not in use, ensure the incubator is clean and dry.
- Emmagatzemar en un lloc fresc i sec, lluny de la llum solar directa i de temperatures extremes.
- Keep the original packaging for safe storage and transport.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Temperature not stable/incorrect | Incorrect setting, poor ventilation, external temperature fluctuations | Verify temperature setting. Ensure incubator is in a stable environment. Check fan operation. |
| Humitat massa baixa/alta | Insufficient/excessive water, improper ventilation | Adjust water levels in the tray. Ensure water bottles are correctly inserted. Check for proper air circulation. |
| Els ous no giren automàticament | Egg turning mechanism off, obstruction, motor issue | Perform an 'Egg Turning Test' (press and hold button for 3 seconds). Check for any obstructions in the egg tray. Ensure the motor is connected. |
| Low hatching rate | Incorrect temperature/humidity, infertile eggs, poor egg quality | Double-check all settings. Use the egg candler to verify embryo development. Ensure fresh, fertile eggs are used. |
| Incubator not powering on | Cable d'alimentació desconnectat, apagadatage, faulty power supply | Check power connections. Verify power outlet. If using 12V, check battery. Contact support if issue persists. |
8. Especificacions
| Característica | Detall |
|---|---|
| Nom del producte | Egg Incubator Machine |
| Marca | WONEGG (also HHD) |
| Model | WONEGG High Quality Hatchery Equipment |
| Funció | Full-automatic Poultry Egg Incubator |
| Egg Turning Mode | Automatic Egg Turning |
| Punts clau de venda | Alta productivitat |
| Certificacions | CE, FCC, ROHS, UL |
| Ús | Chicken, Reptile, Bird, Turkey, Goose, Duck, Other |
| Hatching Rate | 98% ~ 100% |
| Egg Capacity (Chicken Eggs) | 128 pcs (Varies by configuration: 1 Layer: 48-72 eggs; 2 Layers: 118-144 eggs; 3 Layers: 168-216 eggs; 4 Layers: 268-288 eggs) |
| Components bàsics | PCB Board, Motor, Heating Plate, Fan |
| Material | PET, ABS, Stainless steel |
| Voltage | 12V/110V/220V/12V+220V |
| Mida (L*W*H) | 52*50*28.5 cm (for 128-egg configuration, may vary) |
| Pes | 5.6 kg (may vary by configuration) |
9. Consells d'usuari
- Egg Selection: Always use fresh, clean, and fertile eggs for the best hatching results.
- Medi ambient: Place the incubator in a room with stable ambient temperature and humidity to minimize fluctuations inside the unit.
- Qualitat de l'aigua: Use distilled water for the humidity system to prevent mineral buildup and ensure accurate humidity readings.
- Seguiment: Regularly check the temperature and humidity displays, especially during the first few days of incubation.
- Candling: Candle eggs periodically (e.g., day 7 and day 14 for chicken eggs) to remove infertile or non-developing eggs, which can spoil and affect other eggs.
10. Garantia i assistència
10.1 Garantia del producte
The WONEGG Dual Power Automatic Egg Incubator comes with a 1 any de garantia on core components (PCB Board, Motor, Heating Plate, Fan) from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
10.2 Suport tècnic
If you encounter any issues or have questions regarding the operation, maintenance, or troubleshooting of your incubator, please contact your seller or the manufacturer's customer support. Provide your product model and a detailed description of the issue for prompt assistance.
