1. Producte acabatview
The BENINCA TO.GO 2A is an advanced two-channel remote control designed for garage door and gate openers. It utilizes a 433.92 MHz frequency with Advanced Rolling Code (ARC) technology, offering enhanced security and reliable operation. This manual provides detailed instructions for programming, operation, and maintenance.
2. Especificacions tècniques
| Característica | Especificació |
|---|---|
| Número de model | BENINCA TO GO 2A |
| Nombre de canals | 2 |
| Freqüència | 433.92 MHz |
| Mètode de codificació | Rolling Code (Advanced Rolling Code - ARC 128 BIT) |
| Bateria | 12V 23A |
| Temperatura de funcionament | -20 °C a +50 °C |
| Dimensions (LxWxH) | 65 x 40 x 14 mm |
| Certificació | CE |
| Origen | Xina continental |
What is Advanced Rolling Code (ARC)?
The Advanced Rolling Code (ARC) technology, with its 128-bit transmitted code length (compared to the standard 64-bit), provides maximum security against unauthorized access and code grabbing, ensuring the safety of your property.
3. Configuració i programació
Important: Access to your receiver/opener unit is required for programming. Please ensure you have physical access to it before attempting to program the remote control.
Follow these steps to program your new BENINCA TO.GO 2A remote control with your receiver:
- Localitza el receptor: Obriu el casing of your receiver unit. This unit is typically located next to your garage door or gate motor.
- Activa el mode de programació: On the receiver's circuit board, press the programming button (often labeled 'PGM'). The LED light on the receiver will illuminate, indicating it is in programming mode. Release the button.
- Programa el comandament a distància: Within the next 10 seconds, press a button on your new BENINCA TO.GO 2A remote control. Release the button.
- Confirma la programació: Wait for approximately 10 seconds. Your new remote control should now be programmed and ready for use.
For additional guidance, you may refer to the official user manual PDF: Manual d'usuari (PDF)
4. Funcionament
Once programmed, operating your BENINCA TO.GO 2A remote control is straightforward:
- Obertura/tancament: Press either of the two white buttons on the remote control to activate your garage door or gate opener. The LED indicator on the remote will light up during transmission.
- Interval: Ensure you are within a reasonable operating range of your receiver for optimal performance.
5. Manteniment
- Substitució de la bateria: The remote control uses a 12V 23A battery. If the LED indicator on the remote control does not light up or appears dim when a button is pressed, it is time to replace the battery. Carefully open the remote control casing and replace the battery, ensuring correct polarity.
- Neteja: Clean the remote control with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the casing i components interns.
- Emmagatzematge: Store the remote control in a dry place, away from extreme temperatures and direct sunlight.
6. Solució De Problemes
- El comandament a distància no respon:
- Check the battery: Replace the 12V 23A battery if the LED indicator is dim or not lighting up.
- Re-program the remote: Follow the steps in Section 3 to re-program the remote control with your receiver.
- Ensure you are within range of the receiver.
- Problemes de compatibilitat:
WARNING: The BENINCA TO.GO 2A is NOT compatible with the similar-looking Beninca TO.GO2WV remote control. Please verify your existing remote control model carefully before purchase or programming.
Figure 5: TO.GO 2A vs. TO.GO2WV Compatibility Warning 
Figure 6: Beninca Remote Control Model Differences 
Figure 7: Visual Guide for Beninca Remote Models
7. Consells d'usuari
- Always ensure you have access to your garage door or gate opener's receiver before attempting to program a new remote. This is a common requirement for most rolling code systems.
- Keep a spare remote control in a secure location, such as inside your home, in case your primary remote is lost or damaged.
- If you have multiple BENINCA remotes, double-check the model number on the back of the remote to ensure compatibility, especially with the TO.GO2WV model.
8. Preguntes freqüents (FAQ)
- P: Quin és l'abast del comandament a distància?
- A: The effective operating range can vary depending on environmental factors and obstacles. For best results, operate within a clear line of sight to your receiver.
- Q: Can I use this remote for multiple garage doors?
- A: The BENINCA TO.GO 2A has two channels, meaning it can control two different BENINCA receivers (e.g., two separate garage doors or a garage door and a gate), provided each is programmed to a different button.
- Q: My old remote looks similar, but it's a TO.GO2WV. Will this one work?
- A: No, the BENINCA TO.GO 2A is NOT compatible with the TO.GO2WV model, despite visual similarities. Please ensure you have the correct model for your system.
- Q: What should I do if I lose my remote control?
- A: If your remote is lost, you can purchase a new BENINCA TO.GO 2A and program it following the instructions in Section 3. For security, you may also want to clear all existing codes from your receiver and reprogram all active remotes.
9. Garantia i Suport
For any issues or support inquiries, please contact the manufacturer or your point of purchase. Ensure you have your product model number (BENINCA TO.GO 2A) available when seeking assistance.
Informació del fabricant:
Shenzhen Scimagic Development Technology Co.LtdHonghai Gebu, Building 2301, Baoan Road,
Songgang Baoan District, Shenzhen Guangdong, China
