ANENG RN02/RN03 Digital Inclinometer User Manual

1. Introducció

The ANENG RN02/RN03 Digital Inclinometer is a high-precision angle measurement tool designed for various applications including woodworking, construction, vehicle maintenance, and DIY projects. It features a clear digital display, magnetic base for hands-free operation, and automatic screen flip for easy reading. The RN03 model further enhances functionality with an integrated horizontal laser.

2. Informació de seguretat

• Manipuleu sempre el dispositiu amb cura per evitar danys.
• Keep the device away from strong magnetic fields to avoid interference with measurements.
• For RN03 model: Avoid direct eye exposure to the laser beam. Do not point the laser at people or reflective surfaces.
• Do not attempt to disassemble or modify the device, as this may void the warranty and cause injury.
• Use only the specified Type-C charging cable and a DC 5V output adapter for charging.

3. Contingut del paquet

En obrir el paquet, comproveu que tots els elements hi siguin presents i que estiguin en bon estat:

• Digital Inclinometer (RN02 or RN03 model, as ordered)
• Cable de càrrega USB tipus C
• Manual d'instruccions
• Caixa de paquets

4. Producte acabatview

4.1 Components i pantalla

1. Port de càrrega: Type-C port for battery charging.
2. Pantalla LCD retroil·luminada: Shows angle, battery level, and mode indicators.
3. Power Switch / Laser Level Light Switch: Long press to power on/off. Short press to activate/deactivate the laser (RN03 only).
4. Lock/Slope Key / Data Retention: Single press to switch between lock/slope display. Long press to retain (HOLD) the current data.
5. Botó ZERO: Short press to set the current plane as the reference (relative measurement). Long press to restore to absolute measurement.
6. Horizontal Laser Output Port: Emits the horizontal laser line (RN03 only).

5. Especificacions

The following table details the key specifications and functional parameters of the ANENG RN02 and RN03 models:

6. Configuració

6.1 Càrrega inicial

Before first use, or if the battery is low, charge the inclinometer using the provided Type-C USB cable.

1. Connect the Type-C end of the cable to the charging port on the inclinometer.
2. Connect the USB-A end of the cable to a DC 5V output adapter (not included) or a computer USB port.
3. The charging indicator light will be bright red while charging.
4. The indicator light will turn off when the battery is fully charged.

A full charge typically takes 2 hours and provides approximately 72 hours of continuous use.

7. Instruccions de funcionament

7.1 Encès/Apagat

• Encès: Premeu llargament el botó Interruptor d'alimentació button (labeled '3' in Figure 2).
• Apagar: Premeu llargament el botó Interruptor d'alimentació button again. The device will also automatically power off after 12 minutes of no operation to conserve battery.

7.2 Measurement Modes (Absolute/Relative)

The inclinometer supports two measurement modes:

• Absolute Measurement Mode: This is the default mode, measuring the angle relative to a true horizontal plane (0.00°).
• Relative Measurement Mode: Allows you to set any surface as a temporary 'zero' reference.

7.3 Setting Relative Zero

To set a relative zero point:

1. Place the inclinometer on the desired reference surface.
2. Premeu breument ZERO button (labeled '5' in Figure 2). The display will show 0.00°, indicating the new reference.
3. To return to absolute measurement, long press the ZERO botó de nou.

7.4 Data Retention (HOLD Function)

To hold the current measurement on the display:

• Premeu llargament el botó H/% button (labeled '4' in Figure 2). The 'HOLD' indicator will appear on the screen.
• Premeu llargament el botó H/% button again to exit the hold function and resume live measurement.

7.5 Unit Switching (Angle/Slope Percentage)

To switch between angle degrees (°) and slope percentage (%):

• Premeu breument H/% button (labeled '4' in Figure 2).

7.6 Laser Function (RN03 Only)

The RN03 model includes a horizontal laser for alignment:

• Amb el dispositiu engegat, premeu breument el botó Interruptor d'alimentació button (labeled '3' in Figure 2) to turn the laser on or off.

7.7 Automatic Screen Flip

The inclinometer features an intelligent automatic screen flip function. The display will automatically rotate 180° when the device is inverted, ensuring the readings are always upright and easy to read from any orientation.

8. Calibració

The instrument may be affected by impact or temperature changes. Recalibration is recommended to ensure measurement accuracy.

1. Turn on the instrument. Place it on a flat, stable surface. Confirm the instrument is in normal measurement mode. Long press the power button and the H/% key at the same time.
2. When '1' in 'CAd1' starts to flicker and beep, rotate the instrument 180° and lay it flat. Press the 'H/%' key to confirm.
3. When '2' in 'CAd2' starts to flicker and beep, rotate the instrument 90° and lay it flat. Press the 'H/%' key to confirm.
4. When '3' in 'CAd3' starts to flicker and beep, rotate the instrument 180° and lay it flat. Press the 'H/%' key to confirm.
5. When '4' flashes and buzzes, press the 'H/%' key to display 'CAd5', and place the instrument display screen horizontally down on the edge of the plane (ensure that the button is suspended).
6. When '5' flashes and buzzes, turn the instrument 180° as shown in the figure until the display screen is upwards and flat, and press the 'H/%' key to confirm.
7. Wait until the '6' in the 'CAd 6' displayed on the screen flashes, press the H/% key, and the screen displays 'CAd'. After about 3 seconds, the instrument calibration is completed and normal measurement is entered.

9. Manteniment

• Clean the device regularly with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ensure the display and magnetic surfaces are free from dust and debris for accurate readings.
• Store the inclinometer in a dry place, away from extreme temperatures and direct sunlight.
• Keep the charging port free of dust and moisture.

10. Solució De Problemes

• El dispositiu no s'encén: Check battery level. If low, charge the device. Ensure the power button is long-pressed.
• Lectures inexactes: The device may require recalibration. Follow the calibration steps in Section 8. Ensure the measurement surface is clean and stable.
• 'Err' displayed on screen: This typically indicates the auto-power-off function has activated due to 12 minutes of inactivity. Simply power the device back on.
• Laser (RN03) not working: Ensure the device is powered on and short press the power button to activate the laser. Check battery level.

11. Consells d'usuari

• Utilize the Magnetic Base: For hands-free operation, attach the inclinometer to any ferrous metal surface. This is especially useful for setting angles on saw blades or metal frames.
• Relative Zero for Complex Angles: When working with non-level surfaces, use the relative zero function to measure angles relative to that specific surface, simplifying complex setups.
• Laser for Alignment (RN03): The horizontal laser on the RN03 model can be used for quick visual alignment over distances, aiding in tasks like picture hanging or tile installation.
• Reviseu la bateria regularment: Although the device has a long battery life, it's good practice to check the battery indicator before starting critical measurements to avoid interruptions.

12. Garantia i Suport

Per obtenir informació sobre la garantia, assistència tècnica o consultes sobre el servei, consulteu els termes i condicions específics del venedor o poseu-vos en contacte amb el punt de compra. Conserveu el rebut de compra com a comprovant de compra.