HIROYASU Compatible NL-770S

Manual d'usuari

HIROYASU IC-980Pro Compatible Mobile Radio Antenna

Model: NL-770S

1. Introducció

This manual provides instructions for the proper installation, operation, and maintenance of your NL-770S VHF/UHF Mobile Radio Antenna. Designed for compatibility with radios like the HIROYASU IC-980Pro, this antenna offers dual-band functionality for 144MHz and 430MHz frequencies, featuring a magnetic mount for easy vehicle attachment.

2. Contingut del paquet

Si us plau, comproveu el paquet per veure si hi ha els elements següents:

  • 1 x NL-770S VHF/UHF Dual Band Antenna
  • 1 x Magnetic Mount Base
  • 1 x 5-meter RG-58 Coaxial Cable with SMA Female Connector
  • (Optional) 1 x Adapter (if included in your kit)
Complete antenna kit including NL-770S antenna, magnetic mount base, and coaxial cable.

Figure 1: Complete NL-770S Antenna Kit

Antenna, magnetic mount, coaxial cable, and an adapter, illustrating the full assembly.

Figure 2: Antenna Kit with Adapter

3. Especificacions

Detailed product diagram with specifications: Frequency Range (VHF 136-174MHz, UHF 400-470MHz), Gain (2.15/3.0dBi), Max Input Power (50W), VSWR (<1.5), Impedance (50 Ohm), Length (53cm), Cable (5m RG-58 with SMA-F connector).

Figure 3: NL-770S Antenna Specifications Diagram

Característica Especificació
Tipus d'element Antena
Frequency Range (VHF) 136-174MHz (144MHz center frequency)
Frequency Range (UHF) 400-470MHz (435MHz center frequency)
Guanyar 2.15/3.0 dBi
Potència d'entrada màxima 50W
VSWR Menys de 1.5
Impedància 50 ohms
Longitud de l'antena 53 CM
Cable coaxial 5-meter RG-58 with SMA Female Connector
Diàmetre del muntatge magnètic 90 mm
Material Plàstic

4. Configuració i instal·lació

  1. Trieu una ubicació de muntatge: Select a flat, metallic surface on your vehicle (e.g., roof, trunk lid) that is free from obstructions and provides a good ground plane. Ensure the surface is clean and dry for optimal magnetic adhesion.
    Image detailing the magnetic mount base with a 90mm diameter measurement.

    Figure 4: Magnetic Mount Base (90mm diameter)

  2. Fixeu el suport magnètic: Place the magnetic mount base firmly onto the chosen metallic surface. The strong magnet will secure it in place. Ensure no debris is trapped between the magnet and the vehicle surface to prevent scratches.
  3. Muntar l'antena: Screw the NL-770S antenna rod onto the connector on the magnetic mount base. Hand-tighten until secure, but do not overtighten.
    Primer pla view of the NL-770S antenna rod and base.

    Figure 5: NL-770S Antenna Rod

  4. Encamina el cable coaxial: Carefully route the 5-meter RG-58 coaxial cable from the magnetic mount into your vehicle, avoiding sharp edges, pinch points, or areas where it could be damaged by doors or windows. Ensure the cable does not interfere with vehicle operation.
  5. Connecta't a la ràdio: Connect the SMA female connector of the coaxial cable to the antenna input port on your mobile radio. If your radio requires a different connector type, use an appropriate adapter (not always included).

5. Instruccions de funcionament

Once the antenna is securely mounted and connected to your mobile radio:

  1. Power On Your Radio: Turn on your mobile radio according to its manufacturer's instructions.
  2. Seleccioneu la banda de freqüència: The NL-770S is a dual-band antenna. Ensure your radio is set to the desired VHF (144MHz band) or UHF (430MHz band) frequency.
  3. Perform SWR Check (Recommended): For optimal performance and to prevent damage to your radio, it is highly recommended to perform a Standing Wave Ratio (SWR) check using an SWR meter. The VSWR should be less than 1.5.
  4. Transmissió i recepció: You can now use your mobile radio for communication. Adjust your radio's settings (e.g., squelch, volume) as needed for clear reception.

Caution: Do not transmit without an antenna connected to your radio, as this can cause damage to the radio's final ampmés viutage.

6. Manteniment

  • Inspecció periòdica: Periodically check the antenna rod, coaxial cable, and magnetic mount for any signs of wear, damage, or corrosion.
  • Neteja: Keep the magnetic mount base and the vehicle surface clean to ensure strong adhesion and prevent scratches. Wipe the antenna rod with a soft, damp drap si s'embruta.
  • Gestió de cables: Ensure the coaxial cable remains properly routed and secured to prevent accidental damage or entanglement.
  • Emmagatzematge: If removing the antenna for extended periods, store it in a clean, dry place away from extreme temperatures.

7. Solució De Problemes

  • Mala qualitat del senyal:
    • Check antenna mounting location for obstructions.
    • Assegureu-vos que totes les connexions de cable estiguin segures.
    • Verify the antenna is compatible with the radio's frequency band.
    • Perform an SWR check to ensure proper tuning.
  • Antenna Not Sticking Firmly:
    • Clean the magnetic mount base and the vehicle surface thoroughly.
    • Ensure the mounting surface is flat and metallic.
  • Sense transmissió/recepció:
    • Confirm the coaxial cable is correctly connected to both the antenna and the radio.
    • Check the radio's power and antenna settings.
    • Inspeccioneu el cable per veure si hi ha danys visibles.

8. Consells d'usuari

  • For best performance, mount the antenna as high as possible on your vehicle, ideally in the center of the roof, to maximize the ground plane effect.
  • Always ensure the magnetic mount is firmly attached before driving, especially at high speeds.
  • Consider using a cable protector where the coaxial cable enters the vehicle to prevent wear and tear.

9. Garantia i Suport

Per a qualsevol problema que no estigui cobert en aquest manual o per a consultes sobre la garantia, poseu-vos en contacte directament amb el venedor o el fabricant. Conserveu el rebut de compra com a comprovant de compra.

Documents relacionats - NL-770S

Preview Nappex USB Magnetic Charging Cable - 80cm, Black - Product Overview i Seguretat
Producte oficial acabatview and safety instructions for the Nappex USB Magnetic Charging Cable. Features include 80cm length, magnetic connection, durable materials (PVC, TPE, ABS, Tinned Copper), and compliance with CE, RoHS standards. Learn about safe usage, troubleshooting, and warranty information.
Preview Nappex USB Magnetic Charging Cable White - User Manual & Safety Guide
Official user manual and safety instructions for the Nappex USB Magnetic Charging Cable (White). Learn about product specifications, safe usage, troubleshooting, and warranty information.
Preview Manual d'usuari de NeuroLight - Pupil·lòmetre portàtil IDMED
Manual d'usuari complet per al pupil·lòmetre de vídeo portàtil IDMED NeuroLight. Cobreix la configuració, el funcionament, la seguretat, el manteniment i la resolució de problemes per a professionals mèdics.
Preview Handleiding Smartwatchbandje Vervangen | Smartwatchbanden NL
Vind een gedetailleerde handleiding voor het vervangen van uw smartwatchbandje bij Smartwatchbanden NL. Neem contact op voor ondersteuning via telefoon of e-mail.
Preview Whirlwind SC48RJ Cable Analyzer: Operation and Warranty
A guide to the operation and warranty information for the Whirlwind SC48RJ Cable Analyzer, a device for testing professional speaker, Ethernet, and XLR cables.
Preview Gebruiksaanwijzing de Ice-Watch: Instellingen en Onderhoudsgids
Gedetailleerde instructions voor het instellen van de datum en tijd op uw Ice-Watch, samen met essentiële onderhoudsrichtlijnen om de staat ervan te behouden. Llegeix més sobre la temperaturaurlimieten, het vermijden van schade door omgevingsfactoren en waterbestendigheid.