Kemei Professional Hair Clipper and Shaver Kit User Manual

Introducció

This manual provides detailed instructions for the safe and effective use, setup, operation, and maintenance of your Kemei Professional Hair Clipper and Shaver Kit. Please read this manual thoroughly before using the product and keep it for future reference.

3. Safety & Warnings

Informació important de seguretat

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

• Warning: Keep the device and its cord out of reach of children under 3 years old.
• Keep away from children unless supervised by an adult.
• No utilitzeu aquest producte per a finalitats diferents a les previstes.
• Inspect the product before each use; do not use if damaged.
• Follow installation and operation guidelines to avoid injury.
• No exposar a l'aigua ni a la humitat.

Contingut del paquet

Please check the contents of your package upon receipt. The kit may vary depending on the model purchased.

KM-8526 Package Contents:

• 2 x maquineta de cabell
• 1 x cable USB
• 1 x raspall de neteja
• 1 x manual
• 7 x Limit Combs (1/2/3mm, 1.5/3/6/9mm)

KM-2031 Package Contents:

• 1 x Shaver
• 1 x Funda protectora
• 1 x cable USB
• 1 x raspall de neteja
• 1 x manual

KM-PG233 Package Contents:

• 1 x Host (Clipper)
• 1 x cable USB
• 1 x raspall de neteja
• 1 x manual
• 3 x Limit Combs (1/2/3mm)

Especificacions

Especificacions específiques del model:

4. Instruccions d'ús

Carregant

1. Connect the provided USB cable to a certified 5V power adapter.
2. The indicator light will show charging status. Red light indicates charging, blue light indicates charging complete.

Mounting the Limit Comb

1. Alineeu la pinta límit amb la vora de la fulla.
2. Empenyeu-lo lleugerament cap endavant per muntar-lo de manera segura.

Disassembling the Limit Comb

Simply pull the limit comb hard to remove it.

Instruccions de funcionament

Hair Clipping (KM-8526, KM-PG233)

1. Ensure the clipper is fully charged or plugged in.
2. Attach the desired limit comb for your preferred hair length.
3. Engegueu la talladora de cabells amb l'interruptor d'alimentació.
4. Begin clipping hair, moving the clipper against the direction of hair growth.
5. The blade adjustment lever (on KM-8526) allows for fine-tuning cutting length without changing combs.

Electric Shaving (KM-2031)

1. Assegureu-vos que l'afaitadora estigui completament carregada.
2. Engegueu l'afaitadora amb l'interruptor d'alimentació.
3. For best results, shave against the direction of hair growth, holding the shaver at a slight angle.
4. The floating veneer cutter adapts to facial contours for a thorough shave.

Nota: The KM-2031 shaver has an IPX4 waterproof rating, allowing it to be washed inside and out for easy cleaning.

Neteja i manteniment del tallador

Alineació de la fulla

Les vostres talles es van examinar acuradament per assegurar-vos que les fulles estaven unides i alineades abans de sortir de la nostra fàbrica.

Blades must be realigned if they have been removed for cleaning or replacement. To realign the blades, simply match the upper and bottom blades teeth up, point for point. The end of the top blade teeth should be approximately 0.5-1.0mm back from the bottom blade. Compare your clipper blades with the sketch. If blade alignment is incorrect, add a few drops of oil to the blade, turn the clipper on for a few moments, then turn off and unplug. Loosen screws slightly and adjust. Tighten screws after the blade is aligned.

Manteniment del tallador

To maintain your clipper in peak condition, the blades should be oiled every few haircuts. To oil it properly, the unit should be held so the blades are in a downward position. With the clipper blade running, dispense 2-3 drops of oil across the top blade.

Nota: International transport regulations do not allow liquids, so lubricating oil is not included in the package. Please purchase suitable clipper oil separately.

Resolució de problemes

• El dispositiu no s'encén: Ensure the device is fully charged. If it's a corded model or designed for use while charging, ensure it's properly plugged into a working power outlet.
• Rendiment de tall reduït: Clean the blades thoroughly and apply lubricating oil. Ensure blades are correctly aligned. If performance does not improve, blades may need replacement.
• Soroll o vibració inusuals: Turn off the device immediately. Check for any hair or debris lodged in the blades or motor area. If the issue persists, contact customer support.
• La bateria no es carrega: Ensure the USB cable and power adapter are working correctly. Try a different charging port or adapter.

Consells per a l'usuari

• For optimal performance, always ensure your clipper/shaver is fully charged before use.
• Regularly clean and oil the blades to maintain sharpness and prolong the life of your device.
• When using limit combs, start with a longer comb length and gradually reduce it to achieve your desired haircut, especially if you are new to self-haircutting.
• The KM-2031 shaver's IPX4 rating allows for easy cleaning under running water, but ensure the charging port is dry before recharging.
• Avançanttage of the digital display on models like KM-8526 and KM-PG233 to monitor battery life and avoid unexpected power loss during use.

Garantia i suport

Following Guarantees Provided For the Product

1. El producte es produeix mitjançant una estricta gestió i inspecció de la qualitat.
2. If a malfunction occurs during fair use, the consumer can enjoy free warranty service according to the warranty card in the purchasing store or our repair center. (The battery and blade are consumables and are not covered by warranty but can be replaced for a fee).
3. No free services for the following situations:
   • Danys causats per reparació o reforma no aprovada per la nostra empresa.
   • Danys causats per un ús fals o negligent, o per accident.
   • Danys causats per catàstrofes naturals o anormals voltage.
   • Damages caused by ignoring attentions provided within the product specification.

Manufacturer & EU Representative Information

Fabricant:

• Company Name: Yiwu Kemei Electric Appliances Co., Ltd
• Address: 1377-1, Yinhai International Building Center, Chouzhou Road, Yiwu, Zhejiang, China
• Correu electrònic: 694718666@qq.com

Representant autoritzat de la UE:

• Company Name: VAT SPEED SL
• Address: Calle Antonio Salvador N99.1, 28026 Madrid, Spain
• Email: services@vatspeed-eu.com

Informació d'eliminació

WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage.

For disposal, please check your local authority's website for more information and dispose of the battery safely in accordance with the applicable legal requirements.

Producte acabatview Vídeo

Recursos addicionals

Podeu descarregar un manual d'usuari complet en format PDF:

Descarrega el manual d'usuari (PDF)