1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your Anern AN-FGI-AS 3600W Solar Inverter. This pure sine wave inverter with a 120A MPPT charge controller is designed to provide reliable power for various applications, including home, RV, and off-grid solar systems. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.
2. Instruccions de seguretat
Atenció:
- The starting power of inductive loads (e.g., motors, compressors) should be at least three times the rated power of the inverter. Excessive power on can damage the inverter.
- Connect the circuits correctly and install appropriate circuit breakers for each circuit to prevent damage and ensure safety.
- Always follow the correct power-on and power-off sequence to protect the inverter and connected equipment.
Precaucions generals de seguretat:
- Ensure the inverter is installed in a well-ventilated area, away from flammable materials and moisture.
- Do not attempt to open or repair the inverter yourself. Refer all servicing to qualified personnel.
- Mantingueu els nens i les persones no autoritzades allunyats de l'inversor i les seves connexions.
- Utilitzeu l'equip de protecció individual (EPI) adequat quan treballeu amb sistemes elèctrics.
3. Producte acabatview i Característiques
The Anern AN-FGI-AS 3600W Solar Inverter is a versatile power solution with advanced features for efficient energy management.
Característiques principals:
- Sortida d'ona sinusoidal pura per a compatibilitat amb electrònica sensible.
- Vol d'entrada configurabletagGamma e per a electrodomèstics i ordinadors personals mitjançant configuració LCD.
- Corrent de càrrega de la bateria configurable segons les aplicacions mitjançant la configuració de la pantalla LCD.
- Prioritat configurable del carregador solar/CA mitjançant la configuració de la pantalla LCD.
- Compatible amb xarxa voltage o potència del generador.
- Automatic restart while AC is recovering.
- Built-in protections: Overload, Over temperature, Short circuit.
- Disseny intel·ligent del carregador de bateria per a un rendiment optimitzat de la bateria.
- Funció d'arrencada en fred.
- Activació automàtica de la bateria de liti integrada.
- Vol d'entrada fotovoltaica altatagrang e (60-500VDC).
- Multiple operating modes: INVERTER MODE, PV MODE, UTILITY MODE.
- Restauració amb una sola clau a la configuració de fàbrica.
- Intelligent Remote Monitoring capability.
- Emergency Operation support.
- Military-grade Protection Performance.
- LCD Screen Display for easy monitoring.
- Efficient Charging Output.
4. Especificacions
| Atribut | Valor |
|---|---|
| Número de model | AN-FGI-AS 3600W |
| Nom de marca | ANERN |
| Tipus de sortida | DUAL |
| Corrent de sortida | 18A |
| Freqüència de sortida | 50 Hz |
| Mida | 550 * 430 * 210 mm |
| Pes | 10 kg |
| És un dispositiu intel·ligent | Sí |
| Origen | Xina continental |
| Certificació | CE, RoHS |
| Substància química molt preocupant | Cap |
5. Configuració i instal·lació
Proper installation is crucial for the safe and efficient operation of your solar inverter. Please follow these guidelines carefully.
Passos d'instal·lació:
- Muntatge: Choose a suitable location for mounting the inverter. Ensure it is a well-ventilated area, protected from direct sunlight, moisture, and extreme temperatures.
- Cablejat:
- Connect the battery bank to the inverter's battery terminals. Ensure correct polarity (positive to positive, negative to negative).
- Connect the solar PV array to the inverter's PV input terminals. Observe correct polarity and voltage limits (60-500VDC).
- Connect the AC input (mains or generator) to the inverter's AC input terminals.
- Connect your loads (appliances) to the inverter's AC output terminals.
- Install appropriate circuit breakers for each circuit (battery, PV, AC input, AC output) as per local electrical codes.
- Seqüència d'encesa:
- First, turn on the battery.
- Then, start the inverter.
- Next, turn on the circuit breakers for photovoltaic (PV) input.
- Finally, turn on the circuit breakers for mains (AC input) and load (AC output).
- Power-Off Sequence (Reverse Order):
- Turn off the circuit breakers for load and mains.
- Turn off the circuit breakers for photovoltaic (PV) input.
- Apagueu l'inversor.
- Finally, turn off the battery.
6. Instruccions de funcionament
Your Anern solar inverter offers flexible operation modes and settings via its LCD display.
Modes de funcionament:
- INVERTER MODE: The inverter converts DC power from batteries into AC power for your loads.
- PV MODE: Prioritizes solar power to supply loads and charge batteries.
- UTILITY MODE: Prioritizes grid power to supply loads and charge batteries.
Configuració LCD:
The LCD display allows you to configure various parameters:
- Entrada Voltage Rang: Adjust for compatibility with home appliances or personal computers.
- Corrent de càrrega de la bateria: Set the charging current based on your battery type and capacity.
- AC/Solar Charger Priority: Define whether AC or solar charging takes precedence.
- Factory Settings Restoration: Use the one-key restoration function to revert to default settings if needed.
Refer to the on-screen menu for detailed navigation and parameter adjustments.
7. Manteniment
Un manteniment regular garanteix la longevitat i el rendiment òptim del vostre inversor.
- Neteja: Netegeu periòdicament l'exterior de l'inversor amb un drap sec i suau. Assegureu-vos que les obertures de ventilació estiguin lliures de pols i deixalles.
- Connexions: Comproveu anualment totes les connexions elèctriques per comprovar si estan ben ajustades i si hi ha signes de corrosió.
- Medi ambient: Assegureu-vos que l'entorn d'instal·lació es mantingui dins dels rangs de temperatura i humitat especificats.
- Salut de la bateria: Monitor battery health and ensure they are properly maintained according to their manufacturer's guidelines.
Warning: Disconnect all power sources (PV, AC, Battery) before performing any maintenance or cleaning.
8. Solució De Problemes
Aquesta secció ofereix solucions a problemes comuns que podeu trobar. Per a problemes que no figuren aquí, poseu-vos en contacte amb l'atenció al client.
| Problema | Causa possible | Solució |
|---|---|---|
| L'inversor no s'encén | No battery power; incorrect wiring; faulty switch | Check battery connections and charge level; verify all wiring; ensure power switch is ON. |
| Sense sortida de CA | Sobrecàrrega; curtcircuit; baix volum de bateriatage; inverter fault | Reduce load; check for short circuits; charge batteries; restart inverter. |
| PV charging not working | No sunlight; PV array disconnected; incorrect PV voltage | Check solar conditions; verify PV connections; ensure PV voltage is within range (60-500VDC). |
| Overload/Over temperature error | Too many loads; insufficient ventilation | Reduce connected loads; ensure proper airflow around the inverter. |
9. Consells d'usuari
- For optimal battery life, ensure your battery charging current settings match your battery manufacturer's recommendations.
- When using inductive loads, remember the "three times rated power" rule for starting power to avoid inverter damage.
- Regularly check the LCD display for system status and any error codes to proactively address potential issues.
10. Garantia i Suport
The Anern AN-FGI-AS 3600W Solar Inverter is certified with CE and RoHS, ensuring compliance with European safety and environmental standards.
For technical support, warranty claims, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt and product serial number handy for faster service.
