1. Introducció
This manual provides comprehensive instructions for the proper use, care, and maintenance of your Maxell XLII 90 High Bias Audio Cassette Tapes. These tapes are designed for high-fidelity audio recording and playback, offering 90 minutes of recording time (45 minutes per side). For optimal performance, ensure your audio equipment is compatible with Type II (High Bias) cassette tapes.

Image: A sealed 5-pack of Maxell XLII 90 High Bias Audio Cassette Tapes, showing the front of the box with "IDEAL FOR CD" and "HIGH BIAS XLII" branding.
2. Configuració i preparació
Before using your Maxell XLII 90 cassette tapes, ensure your cassette deck or recording device is clean and properly calibrated for Type II (High Bias) tapes. Refer to your audio equipment's manual for specific settings.
2.1 Unpacking the Tapes
- Carefully remove the plastic wrapping from the 5-pack.
- Extract individual cassette tapes from their jewel cases.
- Inspect each tape for any visible damage or defects.

Image: A stack of five individually wrapped Maxell XLII 90 cassette tapes, showing the spine with "maxell XLII 90" and "POSITION IEC TYPE II HIGH" labels.
2.2 Preparing the Tape for First Use
- Avançar/rebobinar ràpid: It is recommended to fast forward the tape to the end and then rewind it back to the beginning before the first recording. This helps to ensure even tape pack and reduces the risk of dropouts.
- Etiquetatge: Use the included labels or a permanent marker to clearly label the cassette and its jewel case with the recording content, date, and any other relevant information.
3. Instruccions de funcionament
3.1 Enregistrament d'àudio
- Insereix cinta: Open the cassette deck door and carefully insert the Maxell XLII 90 tape with the desired side (A or B) facing up, ensuring it clicks into place.
- Select Tape Type: Set your cassette deck's tape type selector to "Type II" or "High Bias" (CrO2). This is crucial for optimal recording and playback quality with XLII tapes.
- Ajustar els nivells: Before recording, set your recording levels. Monitor the peak level meters on your deck to ensure signals do not consistently exceed 0 dB, which can cause distortion. High Bias tapes generally have a higher output level and dynamic range compared to normal bias tapes.
- Begin Recording: Press the "Record" and "Play" buttons simultaneously to start recording.
- Monitor Recording: Continuously monitor the audio quality during recording.
- Atura la gravació: Press the "Stop" button when finished.
3.2 Reproducció d'àudio
- Insereix cinta: Insert the recorded Maxell XLII 90 tape into the cassette deck.
- Select Tape Type: Ensure your cassette deck's tape type selector is set to "Type II" or "High Bias" for accurate playback.
- Comença la reproducció: Press the "Play" button.
- Ajustar el volum: Ajusteu el volum del vostre amplifier or receiver to a comfortable listening level.
3.3 Erase Protection
To prevent accidental erasure of recorded material, locate the small plastic tabs on the top edge of the cassette. Break out the tab for the side you wish to protect. To re-enable recording on a protected side, cover the hole with a piece of adhesive tape.
4. Cura i Manteniment
- Emmagatzematge: Store cassette tapes in their jewel cases to protect them from dust and physical damage. Keep them away from direct sunlight, extreme temperatures, and strong magnetic fields (e.g., speakers, televisions).
- Manipulació: Avoid touching the magnetic tape surface directly, as oils from your skin can degrade sound quality.
- Tape Path Cleaning: Regularly clean the heads, pinch rollers, and capstan of your cassette deck to ensure optimal performance and prevent tape wear. Refer to your deck's manual for cleaning procedures.
- Desmagnetització: Periodically demagnetize your cassette deck's heads to prevent high-frequency loss and noise.
5. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Poor sound quality (dull, muffled) | Incorrect tape type setting on deck; dirty heads; worn tape. | Ensure deck is set to "Type II/High Bias"; clean tape heads; try a new tape. |
| Tape jams or tangles | Worn pinch rollers or capstan; uneven tape pack; damaged cassette shell. | Clean pinch rollers and capstan; fast forward/rewind tape fully; replace damaged tape. |
| No recording or playback | Erase protection tab removed; deck not in record/play mode; power issue. | Cover erase protection hole with tape; ensure correct mode; check power supply. |
6. Especificacions del producte
- Marca: Maxell
- Model: XLII 90 (Item model number: 139473)
- Tipus de cinta: High Bias (Type II, CrO2 equivalent)
- Temps d'enregistrament: 90 minutes (45 minutes per side)
- Recompte d'unitats: 5 tapes per pack
- Product Dimensions (5-pack): 2.75 x 3.25 x 4.25 polzades
- Item Weight (5-pack): 12 unces
- UPC: 025215136450
- Fabricant: Maxell
- Color (packaging): Or
7. Garantia i Suport
For information regarding warranty coverage or technical support for Maxell products, please refer to the official Maxell weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra.
Maxell Official Weblloc: www.maxell.com





