Intermatic TN811C Programable Lamp i temporitzador d'aparells

Introducció

The Intermatic TN811C Programmable Lamp and Appliance Timer is designed to provide automated control over your lighting and appliances, enhancing safety, security, and convenience. This timer features two on/off settings per day and utilizes non-removable trippers for programming. It has a 15 Amp capacity, suitable for controlling various electrical devices, and includes a manual override switch for immediate control.

Informació de seguretat

• Llegiu totes les instruccions abans d'utilitzar.
• No submergiu el temporitzador en aigua ni l'exposeu a una humitat excessiva.
• No supereu la classificació elèctrica màxima de 15 Amps o 1750 watts.
• Assegureu-vos que el temporitzador estigui ben connectat a una presa de corrent amb connexió a terra.
• Unplug the timer from the outlet before cleaning or performing any maintenance.
• This timer is intended for indoor use only. If used in a protected outdoor location, ensure it is shielded from direct weather exposure.

Producte acabatview

The Intermatic TN811C timer is a compact, white, cube-shaped device with a central rotating dial for time setting and programming. It features a standard two-prong plug for wall outlets and a three-prong receptacle for the appliance to be controlled.

Davant view of the Intermatic TN811C timer, showing the central programming dial and manual override switch.

lateral view of the Intermatic TN811C timer, illustrating the appliance receptacle.

Components clau:

• Marcador de temps: The large central dial used to set the current time and program on/off cycles.
• Trippers: Small, non-removable pins around the time dial that are pushed in or pulled out to set specific on/off times.
• Interruptor d'anul·lació manual: A small switch, typically located on the top or side, allowing you to manually turn the connected appliance on or off, overriding the programmed settings.
• Receptacle de sortida: The socket on the timer where you plug in your lamp o aparell.

Configuració

1. Estableix l'hora actual: Rotate the large central dial clockwise until the current time aligns with the "TIME OF DAY" indicator arrow. The dial is marked with AM and PM hours.
2. Horaris d'encesa/apagada del programa: The dial has small, non-removable trippers around its circumference. Each tripper represents a specific time interval. To set an "ON" time, push the corresponding tripper(s) inward. To set an "OFF" time, pull the corresponding tripper(s) outward. The timer allows for 48 on/off settings per day.
3. Temporitzador de connexió: Insert the timer into a standard 120V wall outlet.
4. Connecteu l'aparell: Connecteu la lamp or appliance you wish to control into the outlet receptacle on the timer.

En funcionament

Funcionament automàtic:

Once the current time is set and the on/off trippers are programmed, the timer will automatically turn the connected appliance on and off according to your settings. The dial will continuously rotate, advancing the time.

Anulació manual:

The timer is equipped with a manual override switch. This switch allows you to temporarily turn the connected appliance on or off, regardless of the programmed settings. Be aware that on some models, using the manual override switch may advance the internal time setting. If you notice the programmed times shifting, re-verify and reset the current time as needed.

Manteniment

• Neteja: Unplug the timer from the wall outlet. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Emmagatzematge: If storing the timer for an extended period, unplug it and keep it in a cool, dry place away from direct sunlight.
• Inspecció: Periodically inspect the timer and its cord for any signs of damage, such as frayed wires or cracked casing. Si es detecten danys, interrompeu l'ús i substituïu la unitat.

Resolució de problemes

• L'aparell no s'encén/apaga a les hores programades:
  • Assegureu-vos que el temporitzador estigui ben connectat a una presa de corrent.
  • Verify the appliance is properly plugged into the timer and is in working order.
  • Check that the current time is correctly set on the dial.
  • Confirm that the ON/OFF trippers are correctly pushed in or pulled out for the desired times.
  • Ensure the manual override switch is not in a position that is overriding the programmed settings.
• Timer dial is not moving:
  • Assegureu-vos que el temporitzador estigui connectat a una presa de corrent activa.
  • The timer may be faulty and require replacement.
• Appliance turns ON/OFF at incorrect times:
  • Re-check the current time setting and adjust if necessary.
  • Re-verify the positions of the ON/OFF trippers.
  • If the manual override was recently used, it might have advanced the time. Reset the current time.

Especificacions

Garantia i Suport

Informació de la garantia:

The Intermatic TN811C Programmable Lamp and Appliance Timer comes with a Garantia limitada d'1 anyAquesta garantia cobreix els defectes de materials i de fabricació en condicions d'ús normal. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.

Atenció al client:

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please visit the official Intermatic website or contact their customer service department. You can often find contact information and additional resources on the manufacturer's weblloc web o a través del venedor on vau comprar el producte.

Visita el Botiga Intermatic a Amazon per a més informació.