1. Producte acabatview
The Armstrong 19-566 is a 3/8-inch drive, 6-point universal impact socket designed for demanding applications. Manufactured in the USA, this socket features a unique pinless "4 lug" design, enhancing its strength, durability, and safety during use. It provides true 360-degree rotation of the socket end, allowing for an extended range of motion and smooth operation in various working conditions.
Image 1: The Armstrong 19-566 3/8-Inch Drive 6 Point Universal Impact Socket. This image displays the black oxide finished socket, highlighting its universal joint design for flexible access.
This universal impact socket is engineered for professional use, offering reliable performance and a long service life. Its black oxide finish provides corrosion resistance and a professional appearance.
2. Configuració i preparació
Before using the Armstrong 19-566 universal impact socket, ensure you have the appropriate drive tool and fasteners.
2.1 Eines i equipaments necessaris
- 3/8-inch drive impact wrench or ratchet.
- Appropriate fasteners (1/2-inch SAE).
- Ulleres de seguretat.
- Guants de treball.
2.2 Precaucions de seguretat
- Always wear ANSI-approved safety glasses to protect against flying debris.
- Wear appropriate work gloves to protect hands.
- Ensure the impact socket is securely attached to the drive tool before operation.
- No utilitzeu endolls danyats o desgastats. Inspeccioneu l'endoll per detectar esquerdes o deformacions abans de cada ús.
- Use the correct size socket for the fastener to prevent rounding or damage.
3. Instruccions de funcionament
Follow these steps for effective and safe operation of your universal impact socket.
- Seleccioneu el sòcol correcte: Verify that the 19-566 socket (1/2-inch fastener size) matches the size of the fastener you intend to work with.
- Connectar a l'eina d'accionament: Securely attach the 3/8-inch drive end of the universal socket to your 3/8-inch drive impact wrench or ratchet. Ensure it clicks into place or is firmly seated.
- Posicioneu el sòcol: Place the 6-point end of the socket squarely onto the fastener. The universal joint allows for angular access in tight or obstructed spaces.
- Aplicar parell de força: Operate your impact wrench or ratchet to loosen or tighten the fastener. Maintain a firm grip on the drive tool.
- Elimina el sòcol: Once the task is complete, remove the socket from the fastener and then from the drive tool.
The true 360-degree rotation feature of this universal socket is particularly useful for reaching fasteners at awkward angles, reducing the need for multiple extensions or adapters.
4. Manteniment i cura
Proper maintenance ensures the longevity and performance of your Armstrong universal impact socket.
- Neteja: Després de cada ús, netegeu el sòcol de qualsevol brutícia, greix o residus. Es pot utilitzar un dissolvent suau si cal, i després assequeu-lo completament.
- Lubricació: Periodically apply a small amount of light machine oil to the universal joint mechanism to ensure smooth 360-degree rotation and prevent corrosion.
- Emmagatzematge: Store the socket in a dry environment, preferably in a tool chest or socket rail, to prevent rust and damage.
- Inspecció: Regularly inspect the socket for any signs of wear, cracks, or damage, especially around the drive end and the universal joint. Discontinue use if damage is observed.
5. Solució De Problemes
This section addresses common issues that may arise during the use of your universal impact socket.
- El suport no encaixa:
Solució: Ensure you are using the correct 1/2-inch SAE socket for the fastener. Verify the fastener is not stripped or damaged. - Socket Sticking on Drive Tool:
Solució: Clean the drive end of the socket and the drive tool. Apply a small amount of lubricant to the drive square if necessary. Ensure the drive tool's retention mechanism is functioning correctly. - Universal Joint Stiffness:
Solució: The universal joint may require lubrication. Apply a few drops of light machine oil to the joint and work it back and forth to distribute the lubricant. - Socket Slipping on Fastener:
Solució: This indicates either the wrong size socket is being used, the fastener is severely worn, or the socket itself is worn. Replace the socket or fastener as needed. Always use the correct size.
6. Especificacions
Detailed technical specifications for the Armstrong 19-566 Universal Impact Socket.
| Especificació | Valor |
|---|---|
| Número de model | 19-566 |
| Mida de la unitat | 3/8 polzada |
| Mida de la fixació | 1/2 polzada |
| Tipus de conducció | 6 Punt |
| Acabar | Òxid negre |
| Overall Length (Dimension C) | 2.188 polzades |
| Drive End Dimension (Dimension A) | 0.969 polzades |
| Wrench End Dimension (Dimension B) | 0.750 polzades |
| Bolt Clearance (Dimension D) | 0.500 polzades |
| Wrench Depth (Dimension E) | 0.500 polzades |
| ASME Specification | B107.2-2002 |
| US Federal Specification | GGG-W-660a |
| Pes de l'article | 1 lliures |
| Dimensions del paquet | 2.09 x 0.86 x 0.86 polzades |
| UPC | 781412195668 |
7. Garantia i Suport
Armstrong Industrial Hand Tools are known for their quality and durability. For specific warranty information or support inquiries regarding your 19-566 universal impact socket, please refer to the official Armstrong product documentation or contact Armstrong customer service directly. General warranty terms typically cover manufacturing defects under normal use.
For further assistance, visit the official Armstrong weblloc web o poseu-vos en contacte amb els seus distribuïdors autoritzats.
