Introducció
This manual provides essential information for the proper use and maintenance of your KRUPS F47200 Duo Water Filters. These filters are designed to enhance the quality of water used in compatible KRUPS coffee makers, contributing to a better coffee experience by reducing impurities.
Producte acabatview
The KRUPS F47200 Duo Filters are high-quality replacement water filter cartridges featuring a charcoal water filtration system. They are specifically engineered to eliminate chlorine and other impurities from tap water, which significantly improves the flavor of your coffee. Each package contains two filter cartridges.

Figure 1: KRUPS F47200 Duo Filters retail packaging.
Compatibilitat
These water filter cartridges are compatible with a range of KRUPS coffee makers. Please verify your coffee maker model against the list below to ensure compatibility:
- KRUPS KT611D50
- KRUPS KM611D50
- KRUPS KM611850
- KRUPS KM9008
- KRUPS KM1000
- KRUPS KM1010
- KRUPS FME214
- KRUPS FME212
- KRUPS FMF514
- Models FMF, FME, 629, 619, 180, 176, 466, and 467
Instruccions d'instal·lació
The installation of the KRUPS F47200 water filter is a simple process. Follow these steps to replace your old filter or install a new one:

Figura 2: Primer pla view of two KRUPS water filter cartridges.
- Prepareu el filtre: Remove the new filter cartridge from its packaging. It is important no to get the filter wet before placing it into the filter holder, as this can cause it to expand and prevent proper fitting.
- Locate the Filter Holder: Open the lid of your KRUPS coffee maker. Identify the water filter holder, typically located within the water reservoir.
- Elimina el filtre antic (si escau): If there is an existing filter, carefully remove it from the holder. Dispose of the old filter responsibly.
- Insereix un filtre nou: Place the new KRUPS F47200 filter cartridge firmly into the designated slot within the filter holder. Ensure it is seated correctly and securely.
- Reinstall Filter Holder: Return the filter holder with the new cartridge to its position in the coffee maker's water reservoir. Ensure it clicks into place or is securely fastened according to your specific coffee maker model's design.
- Tanca la tapa: Close the coffee maker lid. Your new water filter is now installed and ready for use.
Manteniment
For optimal performance and continued great-tasting coffee, it is recommended to replace your KRUPS F47200 water filter cartridge regularly. The frequency of replacement depends on your water hardness and usage, but a general guideline is every two months or after approximately 60 brewing cycles. Some KRUPS coffee makers feature an indicator that signals when a filter change is due.
Especificacions
| Atribut | Detall |
|---|---|
| Nom del producte | KRUPS F47200 Duo Filters Water Filtration System |
| Número de model | F47200/8000000302 |
| Material | Charcoal (filtration media), Cotton (filter material) |
| Contingut del paquet | 2 x Water Filter Cartridges |
| Approx. Item Weight (per filter) | 0.8 unces |
| Approx. Product Dimensions (packaging) | 6.1 x 3 x 1.6 polzades |
Informació de seguretat
- Always handle filters with clean hands.
- Do not attempt to clean or reuse old filter cartridges; they are designed for single use.
- Store new filters in a cool, dry place away from direct sunlight and strong odors.
- Mantenir fora de l'abast dels nens.
Atenció al client
For further assistance, questions regarding compatibility, or any issues not covered in this manual, please contact KRUPS customer support. Refer to your coffee maker's original manual or the KRUPS official weblloc web per obtenir dades de contacte específiques.
You can also visit the official KRUPS store online for more product information: KRUPS Store





