Manuals+

KRUPS 030

KRUPS 030 Perfect Froth Milk Frother Attachment User Manual

1. Introducció

This manual provides comprehensive instructions for the proper use, maintenance, and care of your KRUPS 030 Perfect Froth Milk Frother attachment. This accessory is designed to enhance the milk frothing capabilities of compatible KRUPS espresso machines, allowing you to create rich, creamy froth for your favorite coffee beverages.

2. Producte acabatview

The KRUPS 030 Perfect Froth Milk Frother is a replacement attachment designed to fit securely onto the steam wand of your espresso machine. It consists of a durable black rubber component and a slender metal tube, working together to aerate milk effectively.

Krups 030 Perfect Froth Milk Frother attachment in its packaging.

Figura 1: The KRUPS 030 Perfect Froth Milk Frother attachment, shown in its retail packaging. This image displays the black rubber base and the metal frothing tube, which are the primary components of the attachment.

3. Configuració i instal·lació

Before first use, ensure the attachment is clean. Refer to the 'Maintenance and Cleaning' section for initial cleaning instructions.

  1. Identify Steam Wand: Locate the steam wand on your compatible KRUPS espresso machine.
  2. Attach Frother: Carefully slide the black rubber end of the Perfect Froth attachment onto the steam wand. Ensure it is pushed on firmly and securely. The fit should be snug to prevent steam leakage and ensure proper frothing.
  3. Verifica la connexió: Confirm that the smaller metal tube within the attachment is securely inserted into both the top and bottom black rubber parts. An insecure connection can lead to poor frothing performance and unusual noise.

4. Instruccions de funcionament

Follow these steps to achieve optimal milk froth using your KRUPS 030 attachment:

  1. Preparar la llet: Fill a frothing pitcher with cold milk (dairy or non-dairy) to just below the spout.
  2. Vareta de vapor de purga: Briefly open the steam valve on your espresso machine to release any condensed water from the steam wand. Close the valve immediately.
  3. Posició de l'espumador: Submerge the tip of the Perfect Froth attachment just below the surface of the milk in the pitcher.
  4. Activa Steam: Open the steam valve fully. You should hear a gentle hissing sound as air is incorporated into the milk.
  5. Escuma de llet: Keep the frother tip near the surface to create foam, then lower it slightly to heat the milk. Continue until the milk reaches your desired temperature and consistency. The pitcher will become hot to the touch.
  6. Turn Off Steam: Close the steam valve completely before removing the pitcher.
  7. Neteja immediatament: Wipe the frother attachment and steam wand with a damp cloth immediately after use to prevent milk residue from drying. Refer to the 'Maintenance and Cleaning' section for detailed cleaning.

5. Manteniment i Neteja

Regular cleaning ensures optimal performance and longevity of your frother attachment.

Neteja diària:

  • Immediately after each use, wipe the exterior of the frother attachment with a clean, damp tela.
  • Briefly open the steam valve again to clear any milk residue from inside the attachment and steam wand.

Neteja a fons (setmanal o segons calgui):

  • Remove the Perfect Froth attachment from the steam wand.
  • Hand wash the attachment using warm water and a mild dish soap.
  • Pay close attention to the small opening at the top of the rubber stopper and the metal tube. If blockages occur, use a paper clip or a push pin to carefully clear any dried milk residue.
  • Rinse thoroughly with clean water and allow to air dry completely before reattaching.

Precaució: Do not place the frother attachment in a dishwasher, as this may damage the materials.

6. Solució De Problemes

If you encounter issues with your Perfect Froth attachment, consult the following table:

ProblemaCausa possibleSolució
No or poor milk froth
  • Attachment not securely fitted.
  • Small metal tube dislodged.
  • Blockage in the frother tip or steam wand.
  • Insufficient steam pressure from machine.
  • Ensure the attachment is pushed firmly onto the steam wand.
  • Verify the small metal tube is securely inserted into the rubber parts.
  • Clean the frother tip and steam wand thoroughly using a paper clip if necessary.
  • Consult your espresso machine's manual for steam pressure issues.
Loud or unusual noise during frothing
  • Small metal tube not securely inserted.
  • Attachment not properly seated on the steam wand.
  • Check and re-secure the small metal tube within the rubber components.
  • Remove and reattach the frother to the steam wand, ensuring a tight fit.
Steam leakage from attachment
  • Attachment not securely fitted.
  • Rubber component worn or damaged.
  • Ensure the attachment is pushed firmly onto the steam wand.
  • Inspect the rubber for cracks or damage. If damaged, replacement may be necessary.

7. Especificacions

  • Marca: KRUPS
  • Model: 030
  • Dimensions del producte: Aproximadament 7.2 x 4.6 x 0.8 polzades
  • Pes de l'article: Aproximadament 0.16 unces
  • Material: Stainless Steel (tube), Rubber (base/stopper)
  • Instruccions de cura: Rentat només a mà
  • UPC: 010942106128

8. Garantia i Suport

For information regarding warranty coverage, product support, or to purchase replacement parts, please visit the official KRUPS website or contact KRUPS customer service. Keep your proof of purchase for any warranty claims.

KRUPS Official Weblloc: www.krups.com

Documents relacionats - 030

Preview KRUPS Espresso Pronto #988: Manual d'usuari, característiques i guia d'operació
Guia completa del KRUPS Espresso Pronto #988, que inclou les característiques, les instruccions pas a pas per fer espresso i cappuccino, la neteja, la resolució de problemes i la informació sobre la garantia.
Preview KRUPS IL Caffé Bistro 867: User Manual and Operating Guide
Detailed instructions for operating, cleaning, and maintaining the KRUPS IL Caffé Bistro coffee and espresso machine (Model # 867), including safety guidelines, troubleshooting tips, and warranty information.
Preview Manual d'usuari i guia de la màquina d'espresso KRUPS EA895 EVIDENCE ONE
Guia completa per a la màquina d'espresso automàtica KRUPS EA895 EVIDENCE ONE. Aprèn sobre la configuració, la preparació de diverses begudes a base de cafè i llet, la personalització, el manteniment, la neteja i la resolució de problemes.
Preview Krups Authentic Espresso Machine XP381 / XP384 Quick Start Guide
A quick start guide for the Krups Authentic Espresso Machine, covering setup, first use, making espresso with ground coffee and E.S.E. pods, frothing milk, and cleaning.
Preview KRUPS Sensation EA910/EA912 Automatic Espresso Machine User Manual
This manual provides comprehensive instructions for the KRUPS Sensation EA910 and EA912 automatic espresso machines, covering setup, operation, maintenance, and troubleshooting. Learn how to prepare various coffee and milk-based beverages, customize settings, and ensure the longevity of your machine.
Preview Guia d'inici ràpid de la màquina d'espresso autèntica Krups XP381/XP384
Una guia d'inici ràpid per a la màquina d'espresso Krups Authentic (models XP381 i XP384), que cobreix la configuració, el funcionament i la neteja bàsica.