Comandament 17004

Command 7.5 lb Jumbo Utility Hook (Model 17004) Instruction Manual

Brand: Command | Model: 17004

Producte acabatview

The Command 7.5 lb Jumbo Utility Hook provides a damage-free solution for organizing and hanging items. Designed for strong adhesion on various smooth surfaces, it allows for easy installation and clean removal without leaving marks or residue.

This package includes one white utility hook and four jumbo adhesive strips, with each hook capable of holding up to 7.5 pounds.

Command Jumbo Utility Hook

Image: Command 7.5 lb Jumbo Utility Hook, showing its design and size.

Especificacions

CaracterísticaDetall
MarcaComandament
Número de model17004
ColorBlanc
MaterialPlàstic
Tipus de muntatgeMuntatge de paret
Límit de pes7.5 lliures (3.4 kg)
Dimensions (L x A x A)4.25 x 2.01 x 1.34 polzades
Components inclosos1 Jumbo Utility Hook, 4 Jumbo Command Strips
Recomanació de superfíciePainted Walls, Finished Wood, Glass, Tile, Metal

Instruccions d'instal·lació

Follow these steps carefully for proper installation and to ensure maximum holding power and damage-free removal.

Preparació de la superfície

  1. Netegeu la superfície: Wipe the desired surface with rubbing alcohol. Do not use household cleaners, as they may leave a residue that prevents proper adhesion.
  2. Dry the surface: Ensure the surface is completely dry before applying the adhesive strips.
  3. Temperatura: The indoor temperature must be between 50°F (10°C) and 105°F (40°C) for optimal adhesion.
  4. Wait after painting: If the wall has been recently painted, wait at least one day for the paint to cure before applying the hook.
Image showing surface preparation for Command Hook installation

Image: Illustration of cleaning a surface with rubbing alcohol before applying a Command Strip.

Applying the Hook

  1. Separate strips: Take two jumbo adhesive strips and separate them.
  2. Apply to hook: Remove the red liner from one side of each strip and press them firmly onto the back of the hook. Ensure the tabs extend slightly below the hook for easy removal later.
  3. Apply to wall: Remove the black liners from the exposed side of the strips. Press the hook firmly against the prepared wall surface for 30 seconds.
  4. Secure the hook: Slide the hook up and off the mounting base. Press the base firmly for another 30 seconds to ensure strong adhesion.
  5. Espera: Wait 1 hour before sliding the hook back onto the base and hanging any items. This allows the adhesive to reach its maximum holding strength.
Image showing the steps for applying Command Strips and hook to a wall

Image: Detailed steps for applying the adhesive strips to the hook and then to the wall.

Pautes d'ús

  • Capacitat de pes: Do not exceed the maximum weight limit of 7.5 pounds (3.4 kg) per hook.
  • Articles adequats: Ideal for hanging clipboards, brushes, dog leashes, kitchen utensils, lanyards, and light home decor.
  • Articles no adequats: Do not hang valuable items or items that could cause injury if they fall. Do not hang framed pictures on these utility hooks; use Command Picture Hangers for that purpose.
  • Unsuitable Surfaces: Do not use on wallpaper, fabrics, textured walls, brick, or other rough/non-stick surfaces. Do not hang over beds.
Image illustrating items that should not be hung on Command Utility Hooks

Image: A visual warning against hanging framed pictures on utility hooks, recommending specialized Command Picture Hangers instead.

Image showing a weight reference guide for Command products

Image: A visual guide demonstrating the approximate weight of common items (e.g., 1 lb coffee, 3 lbs apples, 5 lbs potatoes, 8 lbs milk) to help users gauge the hook's capacity.

Image showing suitable and unsuitable surfaces for Command products

Image: A chart indicating surfaces where Command products can be used (painted walls, finished wood, glass, tile, metal) and surfaces to avoid (wallpaper, fabrics, textured walls, brick, rough surfaces).

Instruccions d'eliminació

To remove the Command Hook and adhesive strips without damaging your surface, follow these steps:

  1. Remove the hook: Slide the hook up and off the mounting base.
  2. Hold the base: Gently hold the top of the mounting base in place. Do not press down on the base.
  3. Stretch the strip: Slowly stretch the adhesive strip straight down along the wall. Keep stretching the strip until the base releases from the wall. The strip should stretch at least 15 inches (38 cm) to release cleanly.
  4. Do not pull away: Never pull the strip towards you or away from the wall, as this can cause damage.
Image showing detailed removal instructions for Command Hooks

Image: A step-by-step visual guide for removing Command Hooks and adhesive strips, emphasizing pulling the strip straight down.

Video: Official Command Brand video demonstrating the correct method for removing Command Hooks to ensure damage-free removal.

Maintenance and Reuse

The hook itself is reusable. To reuse the hook, simply purchase Command Refill Strips (Jumbo size) and follow the installation instructions again.

Image of Command Jumbo Utility Hook with dimensions

Image: A diagram showing the dimensions (length, width, depth) of the Command Jumbo Utility Hook.

Resolució de problemes

  • Hook not sticking: Ensure the surface was cleaned with rubbing alcohol and was completely dry. Verify the room temperature was within the recommended range (50°F to 105°F). Press firmly for the recommended time during application.
  • Damage during removal: This usually occurs if the strip was pulled away from the wall instead of straight down, or if the strip was not stretched far enough (at least 15 inches).
  • Strip broke during removal: If the strip breaks, gently slide dental floss or fishing line behind the hook and saw through the remaining adhesive. Then, carefully peel off any remaining adhesive residue.

Informació important de seguretat

  • Read all product packaging literature and product labels before use.
  • No pengeu sobre els llits.
  • Do not use on wallpaper or delicate surfaces.
  • Do not use for hanging valuable items or items that could cause injury if they fall.
  • Ensure the hook is securely attached and the adhesive has cured for 1 hour before hanging items.

Garantia i Suport

This product is manufactured by 3M. For warranty information and support, please refer to the details provided on the product packaging or visit the official Command Brand weblloc.

Limited Warranty and Limitation of Liability: This product will be free from manufacturing defects. If defective, your exclusive remedy shall be, at 3M's option, product replacement or refund. 3M will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential.

Documents relacionats - 17004

Preview Instruccions d'instal·lació i extracció de Command Hook
Guia pas a pas per aplicar i treure els ganxos Command, que inclou informació del producte i detalls de la garantia per al model 17003ES.
Preview Miniganxos transparents Command 17006CLR-ES: Guia d'aplicació i extracció
Instruccions pas a pas per aplicar i treure els ganxos mini transparents Command (model 17006CLR-ES) amb tires adhesives transparents. Inclou consells d'ús i informació sobre la garantia.
Preview Command Hooks: Easy On and Off Installation Guide
Step-by-step instructions for applying and removing Command Hooks, ensuring a secure hold and damage-free removal. Includes guides for both installation and removal.
Preview Dell Command | Update v2.3 User Guide: Drivers, BIOS, Firmware Updates
This comprehensive user guide provides detailed instructions for using Dell Command | Update version 2.3 to manage drivers, BIOS, firmware, and software updates for Dell client systems. Learn about installation, configuration, CLI usage, and troubleshooting.