Manual d'instruccions del cartutx de tòner ceràmic microfí Kyocera TK-25 per a impressores FS-1200

Introducció

This manual provides essential instructions for the safe and effective use of your Kyocera TK-25 Microfine Ceramic Toner Cartridge. This toner is designed for use with Kyocera FS-1200 series printers. Please read this manual thoroughly before installation and operation to ensure optimal performance and safety.

Informació de seguretat

Observeu sempre les següents precaucions de seguretat quan manipuleu cartutxos de tòner:

ADVERTIMENT: KEEP OUT OF REACH OF CHILDREN. USE ONLY AS DIRECTED.
Avoid direct contact with toner powder. If contact occurs, follow the first aid instructions below.
Do not incinerate used toner cartridges.
Store toner in a cool, dry place, away from direct sunlight and extreme temperatures.

Mesures de primers auxilis:

ULLS: Immediately flush with water for 15 minutes.
PELL: Rentar amb aigua i sabó.
INGESTIÓ: Consulteu un metge.

Kyocera TK-25 toner cartridge with an orange instruction tag and safety warnings visible. — Image 1: Kyocera TK-25 toner cartridge showing the "REMOVE THIS TAG BEFORE ADDING TONER" instruction and safety warnings regarding children and first aid.

Configuració i instal·lació

Follow these steps to correctly install the Kyocera TK-25 toner cartridge into your compatible Kyocera FS-1200 series printer.

Unpack the Toner Cartridge: Carefully remove the new TK-25 toner cartridge from its packaging. Ensure you have the correct model for your printer.
Prepareu el cartutx: Locate the orange instruction tag on the toner cartridge (as shown in Image 1). Gently pull and remove this tag before proceeding with installation. This tag seals the toner port.
Obriu la coberta de la impressora: Open the front cover or toner access door of your Kyocera FS-1200 series printer. Refer to your printer's specific manual for exact location if unsure.
Traieu el cartutx antic (si escau): If replacing an empty cartridge, carefully pull out the old toner cartridge from its slot. Place it in a sealed bag for proper disposal.
Inseriu un cartutx nou: Align the new TK-25 toner cartridge with the guide rails inside the printer. Push the cartridge firmly until it clicks into place. Do not force it.
Tanqueu la coberta de la impressora: Close the front cover or toner access door of the printer. The printer will typically perform a short initialization cycle.
Imprimeix una pàgina de prova: After installation, it is recommended to print a test page to confirm proper installation and toner distribution.

Kyocera TK-25 Microfine Ceramic Toner box with product details and warnings. — Image 2: Packaging for the Kyocera TK-25 Microfine Ceramic Toner, displaying the product name, brand, and multilingual warnings regarding storage conditions.

Instruccions de funcionament

Once installed, the Kyocera TK-25 toner cartridge operates automatically in conjunction with your Kyocera FS-1200 series printer. The printer's internal system manages toner distribution and usage. No manual operation of the toner cartridge itself is required after installation.

Monitor your printer's display or software for toner level indicators. Replace the cartridge when the printer indicates a low toner warning or print quality degrades significantly.

Manteniment

The Kyocera TK-25 toner cartridge is a sealed unit and requires no user maintenance. Do not attempt to refill the cartridge or disassemble it, as this can lead to toner spills, damage to the printer, and void any warranties.

Emmagatzematge: Store unused cartridges in their original packaging in a cool, dry environment, away from direct sunlight and extreme temperatures (as indicated on the packaging, e.g., 40°C/104°F maximum).
Eliminació: Dispose of empty toner cartridges according to local environmental regulations. Many manufacturers and retailers offer recycling programs for used cartridges.

Resolució de problemes

If you encounter issues after installing your Kyocera TK-25 toner cartridge, consider the following:

Missatge "Tòner baix" o "Substituïu el tòner": Ensure the new cartridge is correctly seated. If the message persists, the printer may not have registered the new cartridge. Try removing and reinserting it, or restarting the printer.
Poor Print Quality (Faded, Streaky Prints): This could indicate an improperly installed cartridge, a faulty cartridge, or other printer issues. Check installation first. If the problem persists, consult your printer's manual or Kyocera support.
Toner Spills: If toner spills, use a damp cloth to wipe it up. Do not use a vacuum cleaner not specifically designed for toner, as toner particles are very fine and can damage regular vacuum filters or cause electrical hazards.
Cartridge Not Fitting: Double-check that you have the correct TK-25 model for your Kyocera FS-1200 series printer. Do not force the cartridge.

Especificacions

Atribut	Detall
Marca	KYOCERA
Model	TK-25
Color	Negre
Pes de l'article	0.5 quilos
Dispositius compatibles	Kyocera FS-1200 Series Printers
Rendiment	Approximately 5,000 pages (based on 5% coverage)

Garantia i Suport

For specific warranty information regarding your Kyocera TK-25 toner cartridge, please refer to the documentation included with your purchase or visit the official Kyocera website. For technical support or further assistance, contact Kyocera customer service directly.

Using non-genuine toner cartridges or attempting to modify the cartridge may void your printer's warranty.

	Guia ràpida de KYOCERA MA2001w/MA2000w Una guia ràpida per a les impressores KYOCERA MA2001w i MA2000w, que cobreix la instal·lació, el funcionament i la resolució de problemes.
	Guia de l'usuari del controlador ampliat de Kyocera versió 4.0 Aquesta guia de l'usuari proporciona instruccions completes per instal·lar i utilitzar el controlador ampliat Kyocera versió 4.0. Cobreix els procediments d'instal·lació per a connexions locals i de xarxa, propietats de la impressora, conceptes bàsics d'impressió, opcions de disseny, retocs finals, configuració d'imatges, gestió de treballs, professionalsfile creació i funcions avançades. La guia està dissenyada per a usuaris d'impressores i MFP Kyocera.
	Guia ràpida de KYOCERA PA2001w/PA2000w: configuració, funcionament i resolució de problemes Una guia ràpida completa per a les impressores KYOCERA PA2001w i PA2000w, que cobreix la instal·lació, el funcionament, la connectivitat, la configuració del programari i la resolució de problemes. Inclou detalls sobre els cartutxos de tòner i l'accés a l'eina client de KYOCERA.
	Fitxa de dades de seguretat (SDS) del tòner groc KYOCERA TK-5430Y Fitxa de dades de seguretat (SDS) completa per al tòner groc KYOCERA TK-5430Y, que detalla la identificació de perills, primers auxilis, manipulació, emmagatzematge i informació normativa per a les impressores ECOSYS MA2100cwfx, MA2100cfx, PA2100cwx, PA2100cx.
	KYOCERA ECOSYS M2540dw Frequently Asked Questions Find answers to common questions about the KYOCERA ECOSYS M2540dw printer, including setup, troubleshooting, maintenance, and driver installation. This FAQ guide helps users optimize their printing experience.
	Kyocera TASKalfa 7004i: Impressora multifunció monocroma d'alt rendiment per a l'evolució de l'espai de treball Descobreix la Kyocera TASKalfa 7004i, una impressora multifunció monocroma dissenyada per a una eficiència, seguretat i experiència d'usuari superiors. Aquest document detalla les seves funcions avançades, les especificacions completes i les àmplies solucions opcionals d'acabat i xarxa.

KYOCERA TK-25

Kyocera TK-25 Microfine Ceramic Toner Cartridge Instruction Manual