Capresso 10-Cup Stainless/White Vacuum Carafe Instruction Manual

Producte acabatview

This manual provides instructions for the Capresso 10-Cup Stainless/White Vacuum Carafe, Model 4471.02. This carafe is designed to maintain the temperature of brewed coffee and is specifically compatible with the Capresso CoffeeTEC Digital Coffee Maker for brew-through-the-lid operation.

Imatge 1: The Capresso 10-Cup Stainless/White Vacuum Carafe, featuring a brushed stainless steel body, a white handle, and a white lid with a pouring spout. The Capresso logo is subtly visible on the lower right side of the carafe body.

Característiques principals:

• 10-cup capacity for brewed coffee.
• Vacuum insulation designed to keep coffee hot for up to 4 hours.
• Brew-Through-The-Lid design, compatible with Capresso CoffeeTEC Digital Coffee Makers, minimizes heat and aroma loss during brewing.
• Durable stainless steel construction with a white handle and lid.

Configuració i primer ús

1. Desembalatge: Carefully remove the carafe and its lid from the packaging. Retain packaging materials for future transport or storage if necessary.
2. Neteja inicial: Before first use, wash the carafe interior and exterior, as well as the lid, with warm water and a mild detergent. Rinse thoroughly with clean water. Ensure all soap residue is removed.
3. Assecat: Allow all components to air dry completely or dry with a soft cloth.
4. Col·locació de la tapa: Ensure the lid is securely placed and properly aligned on the carafe. The lid is designed for brew-through operation, meaning it should be on the carafe during the brewing cycle when used with a compatible Capresso CoffeeTEC machine.

Instruccions de funcionament

Using with Capresso CoffeeTEC Digital Coffee Maker:

• Place the empty carafe with its lid securely attached onto the warming plate of your Capresso CoffeeTEC Digital Coffee Maker.
• Proceed with your coffee maker's brewing instructions. The coffee will brew directly into the carafe through the lid, which helps to preserve heat and aroma.
• Once brewing is complete, the carafe can be removed from the coffee maker. The vacuum insulation will maintain the coffee's temperature for an extended period.

Pouring Coffee:

• To pour, simply tilt the carafe. The lid's design allows for pouring without needing to remove it, further minimizing heat loss.
• Ensure the lid is always securely fastened when not pouring to maximize heat retention.

Retenció de calor:

For optimal heat retention, it is recommended to pre-warm the carafe by filling it with hot water for a few minutes before brewing. Discard the hot water before placing the carafe on the coffee maker.

Cura i Manteniment

• Cleaning the Carafe:
  • Wash the carafe by hand with warm, soapy water. Use a soft brush or sponge to clean the interior.
  • Esbandiu bé per eliminar tots els residus de sabó.
  • Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the stainless steel finish or the vacuum seal.
  • The carafe is no apte per a rentavaixelles.
• Neteja de la tapa:
  • The lid can be disassembled for thorough cleaning. Refer to your Capresso CoffeeTEC manual for specific lid disassembly instructions if needed.
  • Wash the lid components with warm, soapy water and rinse well.
  • Ensure all parts of the lid are completely dry before reassembling and placing back on the carafe.
• Emmagatzematge: Store the carafe with the lid slightly ajar to allow air circulation and prevent odors from developing.

Resolució de problemes

• Coffee Not Staying Hot:
  • Ensure the lid is securely and correctly seated on the carafe. A loose lid can cause significant heat loss.
  • Verify that the carafe was pre-warmed with hot water before brewing.
  • Check for any visible damage to the carafe or lid that might compromise the vacuum insulation or seal.
• Difficulty Pouring:
  • Ensure the lid is properly aligned. The pouring mechanism within the lid should be clear of obstructions.
  • Check the lid for any coffee grounds or residue that might be blocking the pouring spout. Clean thoroughly if necessary.
• Olors desagradables:
  • Thoroughly clean the carafe and lid, paying close attention to any crevices where coffee residue might accumulate.
  • Rinse with a solution of baking soda and water, then rinse again with plain water.
  • Store with the lid slightly open to allow air circulation.

Especificacions

Garantia i Suport

For information regarding warranty coverage and terms, please refer to the documentation provided with your original Capresso CoffeeTEC Digital Coffee Maker or visit the official Capresso website. For technical support or replacement parts, please contact Capresso customer service directly.

Podeu trobar més informació i dades de contacte a Botiga Capresso a Amazon.