Manuals+

Confia en 12616

Trust Soundwave 1000P PC Speaker User Manual

Model: 12616

Introducció

This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Trust Soundwave 1000P PC Speaker system. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.

Trust Soundwave 1000P PC Speaker system with subwoofer and two satellite speakers

Image: The Trust Soundwave 1000P PC Speaker system, featuring a central subwoofer unit and two compact satellite speakers, designed for computer audio. The subwoofer is typically placed on the floor, while the satellite speakers are positioned on a desk.

Instruccions de configuració

Follow these steps to correctly set up your Trust Soundwave 1000P PC Speaker system.

  1. Desembalatge: Carefully remove all components from the packaging. Ensure you have the subwoofer, two satellite speakers, and all necessary cables.
  2. Col·locació dels altaveus:
    • Place the subwoofer on the floor, preferably near your computer desk, to optimize bass response. The vertical bass reflex design benefits from clear space around it.
    • Position the two satellite speakers on your desk, equidistant from your listening position, for optimal stereo sound.
  3. Connexió d'altaveus satèl·lit: Connect the cables from the satellite speakers to the corresponding output ports on the subwoofer unit. Ensure a secure connection.
  4. Connecting to Audio Source (PC): Connect the 3.5mm audio jack cable from the subwoofer to the audio output port (usually green) on your computer's sound card.
  5. Connexió d'alimentació: Plug the power cable from the subwoofer into a standard electrical outlet.
  6. Encesa inicial: Turn on the speaker system using the power control, typically located on the subwoofer or a wired remote.

Funcionament dels altaveus

Once set up, you can begin using your Soundwave 1000P speakers.

  • Encès/apagat: Use the main power switch or button to turn the system on or off. An indicator light may confirm the power status.
  • Control de volum: Adjust the overall volume using the dedicated volume knob or controls. Start with a low volume and gradually increase it.
  • Ajust dels baixos: The subwoofer features an adjustable bass control. Rotate the bass knob to achieve your desired level of deep bass.
  • 3D Sound Switch: Activate or deactivate the 3D sound feature using the designated switch. Experiment with this setting to find your preferred audio experience for different content.
  • Entrada d'àudio: The system primarily uses an AUX connection. Ensure your audio source is playing sound through its 3.5mm audio output.

Manteniment i cura

Un manteniment adequat garanteix la longevitat i el rendiment òptim del vostre sistema d'altaveus.

  • Neteja:
    • Desconnecteu l'alimentació abans de netejar.
    • Use a soft, dry cloth to wipe down the speaker surfaces.
    • No utilitzeu netejadors líquids, aerosols ni materials abrasius, ja que poden danyar l'acabat o els components interns.
  • Col·locació: Avoid placing speakers in direct sunlight, near heat sources, or in areas with high humidity. Ensure adequate ventilation around the subwoofer.
  • Gestió de cables: Keep cables tidy and avoid sharp bends or kinks to prevent damage.
  • Emmagatzematge: If storing the speakers for an extended period, disconnect them from power, clean them, and store them in a dry, cool place, preferably in their original packaging.

Guia de resolució de problemes

If you encounter issues with your Trust Soundwave 1000P speakers, refer to the following common problems and solutions.

ProblemaCausa possibleSolució
No hi ha so dels altaveus.
  • L'alimentació no està connectada o no està encesa.
  • Cable d'àudio desconnectat o defectuós.
  • Volum massa baix.
  • Incorrect audio output selected on PC.
  • Ensure power cable is securely plugged in and speakers are turned on.
  • Check 3.5mm audio cable connection to both speakers and PC. Try a different cable if available.
  • Increase speaker volume and PC volume.
  • Verify PC audio settings to ensure the correct output device is selected.
So distorsionat o poc clar.
  • Volum massa alt.
  • Mala qualitat de la font d'àudio.
  • Connexions de cable soltes.
  • Reduce volume on both speakers and PC.
  • Prova amb una font d'àudio diferent o file.
  • Comproveu que totes les connexions dels cables estiguin ben ajustades.
Subwoofer not producing bass.
  • Bass control knob set too low.
  • El subwoofer no està alimentat.
  • Increase the bass control knob on the subwoofer.
  • Ensure the subwoofer unit is receiving power and is turned on.

Especificacions del producte

Key technical details for the Trust Soundwave 1000P PC Speaker system.

  • Número de model: 12616
  • Marca: Confia
  • Tipus d'altaveu: Subwoofer (2.1 system)
  • Potència màxima de sortida: 1000 watts
  • RMS Wattage: 7 Watt (5 + 2 x 1 Watt RMS)
  • Tecnologia de connectivitat: AUX (connector de 3.5 mm)
  • Mode de sortida d'àudio: estèreo
  • Font d'alimentació: Elèctric per cable
  • Pes de l'article: 10 g
  • Tipus de muntatge: Tabletop Mount (for satellites), Floor (for subwoofer)
  • Mètode de control: Toca

Informació de la garantia

Aquest producte ve amb un Garantia limitada. For specific terms and conditions, including warranty duration and claim procedures, please refer to the warranty card included with your purchase or visit the official Trust weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

Atenció al client

For further assistance, technical support, or inquiries not covered in this manual, please visit the official Trust support weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Normalment, podeu trobar les dades de contacte a la fitxa del fabricant. weblloc o embalatge del producte.

Official Trust Weblloc: www.trust.com