Introducció
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Craftmade WB348TS3 Tiger Shark Warplane 48-inch ceiling fan. Please read all instructions carefully before beginning installation to ensure proper function and safety.
Image: The Craftmade WB348TS3 Tiger Shark Warplane 48-inch ceiling fan, featuring a distinctive warplane design with three black blades and an integrated light kit.
Image: The Craftmade WarPlanes collection, showcasing various models including the WB348TS3 Tiger Shark, highlighting its unique design within the series.
Informació important de seguretat
- Llegeix totes les instruccions: Before installing or operating the fan, read and understand all safety information and installation instructions.
- Seguretat elèctrica: All electrical wiring must be performed by a qualified electrician and conform to all local and national electrical codes. Disconnect power at the circuit breaker before installation or servicing.
- Muntatge: Ensure the mounting structure can support the weight of the fan (approximately 13.87 pounds) plus the dynamic load of the fan in operation.
- Espai lliure de la fulla: Maintain a minimum clearance of 7 feet from the floor to the fan blades. Ensure blades do not strike any objects.
- Bombeta: Use only the specified bulb type (B10 60-watt candelabra frosted bulb) or an equivalent LED bulb. Do not exceed the maximum wattage.
- Neteja: Always disconnect power before cleaning the fan. Use a soft, damp tela. No utilitzeu netejadors abrasius.
- Advertència de la proposta 65: Aquest producte us pot exposar a productes químics que l'estat de Califòrnia sap que causen càncer i defectes congènits o altres danys reproductius. Per a més informació, visiteu www.P65Warnings.ca.gov.
Llista de peces
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- Muntatge de la carcassa del motor
- Pales de ventilador (3)
- Light Kit Assembly (Integrated)
- Mounting Bracket/Plate
- Paquet de maquinari (cargols, volanderes, femelles de cable)
- Pull Chains (for fan speed and light)
- B10 60-watt Candelabra Frosted Bulb (1)
- Guia d'instal·lació (aquest manual)
Configuració i instal·lació
Eines necessàries: Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, ladder.
- Desconnexió d'alimentació: Before starting, ensure the power supply to the fan location is turned off at the circuit breaker.
- Instal·lació del suport de muntatge: Fixeu el suport de muntatge a la caixa de connexions del sostre. Assegureu-vos que la caixa de connexions estigui ben fixada a l'estructura de l'edifici i que pugui suportar el pes del ventilador.
- Cablejat: Carefully connect the fan's electrical wires to the household wiring according to local electrical codes. Typically, this involves connecting the black (hot) wire from the fan to the black (hot) wire from the ceiling, the white (neutral) wire from the fan to the white (neutral) wire from the ceiling, and the green or bare copper (ground) wire from the fan to the ground wire from the ceiling. Use approved wire nuts for all connections.
- Attaching Fan Body: Lift the fan motor housing and align it with the mounting bracket. Some models feature a hook and loop system or a slot and slide system to temporarily support the fan while wiring. Secure the fan body to the mounting bracket using the provided screws. Note: If instructions mention loosening screws from the motor housing for mounting, it is often more effective to remove the three screws from the mounting plate, attach the motor housing, and then re-use those screws to secure it.
- Enganxament de la fulla: Attach the three fan blades to the motor housing using the provided screws and washers. Ensure all screws are tightened securely.
- Instal·lació del kit de llum: Connect the light kit wiring to the fan motor wiring. Secure the light kit assembly to the bottom of the fan motor housing. Install the included B10 60-watt candelabra frosted bulb into the light kit socket.
- Pull Chain Installation: Attach the decorative pull chains to the fan speed and light switches.
- Restauració d'energia: Un cop finalitzada la instal·lació i totes les connexions siguin segures, restableu l'alimentació a l'interruptor.
Image: Diagram illustrating the dimensions of the Craftmade WB348TS3 ceiling fan, showing an overall height of 17 inches and a blade sweep diameter of 48 inches.
Imatge: Primer pla view of the integrated light kit and pull chains on the Craftmade WB348TS3 ceiling fan, highlighting the matte white glass and red housing.
Instruccions de funcionament
Your Craftmade WB348TS3 ceiling fan is operated by two pull chains:
- Control de velocitat del ventilador: One pull chain controls the fan speed. Pull the chain repeatedly to cycle through the three available speeds (High, Medium, Low) and Off.
- Control de la llum: The other pull chain controls the integrated light kit. Pull the chain to turn the light On or Off.
- Motor reversible: This fan features a reversible motor for year-round use. A switch on the motor housing (usually located above the blades) allows you to change the direction of blade rotation.
- Operació d'estiu: Set the switch for counter-clockwise rotation to create a downward airflow, providing a cooling effect.
- Operació d'hivern: Set the switch for clockwise rotation to create an upward airflow, circulating warm air trapped near the ceiling.
Manteniment
- Neteja: Per netejar el ventilador, netegeu-lo amb un drap suau iamp cloth. Do not use abrasive materials or harsh chemicals, as these can damage the finish. Ensure power is disconnected before cleaning.
- Cura de la fulla: Periodically check the blade screws for tightness. Loose screws can cause wobbling and noise.
- Substitució de bombetes: Disconnect power before replacing the light bulb. Allow the bulb to cool completely. Replace with a B10 60-watt candelabra frosted bulb or an equivalent LED bulb.
- Lubricació del motor: El motor del ventilador està lubricat permanentment i no requereix lubricació addicional.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El ventilador no arrenca | No power to the fan; Loose wire connections; Motor switch in OFF position. | Check circuit breaker/fuse; Verify all wire connections are secure; Ensure pull chain is not in OFF position. |
| El ventilador trontolla | Cargols de la fulla solts; Fulles desequilibrades; Suport de muntatge solt. | Estrenyeu tots els cargols de la fulla; utilitzeu un kit d'equilibri (no inclòs) si cal; assegureu-vos que el suport de muntatge estigui ben fixat. |
| La llum no funciona | Bulb burned out; Loose wire connection in light kit; Light pull chain in OFF position. | Replace bulb; Check light kit wiring; Ensure light pull chain is in ON position. |
| Funcionament sorollós | Loose screws; Blades rubbing; Motor hum. | Check and tighten all screws; Ensure blades have proper clearance; A slight motor hum is normal, but excessive noise may indicate an issue. |
Especificacions
| Número de model | WB348TS3 |
| Marca | Fet a mà |
| Disseny de ventiladors | Hugger Ceiling Fan (Warplane Style) |
| Envergadura de la fulla | 48 polzades |
| Nombre de fulles | 3 |
| Material de la fulla | Contraxapat |
| Tipus de motor | Quiet AC Motor (153x12 mm) |
| Capacitat de flux d'aire | 4138 CFM |
| Tipus de control | Pull Chain (3-speed fan, On/Off light) |
| Kit de llum | Integrated, Cased White Glass |
| Tipus de bombeta | 1 x B10 60-watt Candelabra Frosted Bulb (Incandescent) |
| Voltage | 120 Volts |
| Dimensions del producte | 48 "P x 48" W x 17" H |
| Pes de l'article | 13.87 lliures |
| Ús interior/exterior | Interior |
| Certificacions | cULus Llistats |
Informació de la garantia
The Craftmade WB348TS3 ceiling fan comes with a Garantia limitada de per vida. For specific terms and conditions, please refer to the warranty card included with your product or visit the official Craftmade weblloc.
Atenció al client
Per a més ajuda, suport tècnic o per a view other products, please visit the official Craftmade store or contact customer service:
- Craftmade Official Store: Visit Craftmade Store on Amazon
- Contact information (phone/email) typically found on product packaging or official weblloc.
