1. Introducció
This manual provides essential information for the installation, operation, and maintenance of the Cisco Catalyst 3560 48-port POE 802.3af Switch, model WS-C3560-48PS-E. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
The Cisco Catalyst 3560 Series is a line of fixed-configuration, enterprise-class switches that include IEEE 802.3af Power over Ethernet (PoE) functionality in Fast Ethernet and Gigabit Ethernet configurations. The Catalyst 3560 is an ideal access layer switch for small enterprise LAN access or branch-office environments, combining 10/100/1000 and PoE configurations for maximum productivity and investment protection while enabling the deployment of new applications such as IP telephony, wireless access, video surveillance, building management systems, and remote video kiosks.
Figura 1: Davant view of the Cisco Catalyst 3560 48-port POE 802.3af Switch. This image displays the front panel of the switch, featuring 48 Fast Ethernet ports and 4 SFP-based Gigabit ports on the right side.
2. Configuració i instal·lació
2.1 Desembalatge i inspecció
Carefully unpack the switch and verify that all components are present and undamaged. Retain the packaging materials for future use or if the unit needs to be transported.
- Cisco Catalyst 3560-48PS-E Switch
- Cable d'alimentació de CA
- Kit de muntatge en bastidor (si s'inclou)
- Cable de la consola
- Documentació (aquest manual)
2.2 Preparació del lloc
Assegureu-vos que el lloc d'instal·lació compleixi els requisits següents:
- Temperatura: Operating temperature range is typically 0°C to 45°C (32°F to 113°F).
- Humitat: Relative humidity should be between 10% and 85% (non-condensing).
- Ventilació: Ensure adequate airflow around the switch. Do not block ventilation openings.
- Potència: A grounded AC outlet with appropriate voltage (240 Volts) is required.
- Estabilitat: Place the switch on a stable, level surface or install it in a standard 19-inch equipment rack.
2.3 Muntatge en bastidor (opcional)
If rack mounting, attach the provided rack-mount brackets to the sides of the switch using the screws supplied with the kit. Secure the switch into the rack using appropriate rack screws.
2.4 Connexió de potència
- Connect the AC power cord to the power connector on the rear panel of the switch.
- Plug the other end of the power cord into a grounded AC outlet.
- The switch will begin its power-on self-test (POST) sequence. Observe the system LED for status.
2.5 Connexió de dispositius de xarxa
Connect network devices (e.g., computers, IP phones, wireless access points) to the 48 10/100BASE-TX PoE ports using standard Ethernet cables. For uplink connections or high-speed devices, use the 4 SFP-based Gigabit ports with appropriate SFP transceivers and fiber optic or copper cables.
3. Instruccions de funcionament
3.1 Engegada i arrencada inicial
Once connected to power, the switch automatically powers on. The System LED will indicate the boot status. A solid green System LED indicates successful boot-up and normal operation.
3.2 Indicadors LED
Monitor the front panel LEDs to understand the switch's status:
- LED del sistema: Indicates overall system health. Green (normal), Amber (fault).
- RPS LED: Redundant Power System status.
- LED d'estat del port: Indiqueu l'estat de l'enllaç, l'activitat i l'estat del PoE per a cada port.
- Botó de mode: Cycles through port status, port duplex, port speed, and PoE mode.
3.3 Accés a la configuració bàsica
The switch can be configured via a console port, Telnet, SSH, or a web-based interface (if enabled). For initial configuration, connect a console cable from your computer's serial port to the switch's console port.
- Console Port Settings: 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control.
- Refer to the Cisco IOS Software Configuration Guide for detailed configuration procedures.
3.4 Power over Ethernet (PoE) Operation
The 48 Fast Ethernet ports support IEEE 802.3af PoE, providing power to connected PoE-compatible devices such as IP phones and wireless access points. The switch automatically detects and powers PoE devices. Ensure the total power draw does not exceed the switch's PoE budget.
4. Manteniment
4.1 Atenció general
Keep the switch in a clean, dust-free environment. Avoid exposing it to direct sunlight, excessive heat, or moisture. Do not obstruct the ventilation openings.
4.2 actualitzacions de microprogramari
Periodically check the Cisco website for the latest firmware updates. Applying updates can improve performance, add new features, and address security vulnerabilities. Follow Cisco's official documentation for firmware upgrade procedures.
4.3 Neteja
Use a soft, dry cloth to clean the exterior of the switch. Do not use liquid or aerosol cleaners. Ensure the switch is powered off and disconnected from the power source before cleaning.
5. Solució De Problemes
Aquesta secció proporciona els passos bàsics per a la resolució de problemes comuns.
5.1 Problemes d'energia
- Sense energia:
- Verify the power cord is securely connected to both the switch and the AC outlet.
- Comproveu la presa de corrent amb un altre dispositiu per assegurar-vos que funciona.
- Assegureu-vos que el volum correctetage (240 Volts) is supplied.
- System LED is Amber: Indicates a system fault. Consult the Cisco documentation for specific error codes or contact Cisco support.
5.2 Problemes de connectivitat de xarxa
- Sense enllaç al port:
- Comproveu la connexió del cable Ethernet als dos extrems.
- Prova un cable o port diferent.
- Verifiqueu que el dispositiu connectat estigui encès i funcioni correctament.
- El dispositiu PoE no s'encén:
- Ensure the device is IEEE 802.3af compliant.
- Check the PoE status LED for the port.
- Verify the switch's total PoE power budget is not exceeded.
- Prova de connectar el dispositiu a un port PoE diferent.
5.3 Configuration Access Issues
- Cannot Access via Console:
- Verify console cable connection.
- Check serial port settings (9600 baud, 8 data bits, no parity, 1 stop bit, no flow control).
- Ensure the terminal emulation software is correctly configured.
6. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | WS-C3560-48PS-E |
| Marca | Cisco |
| Ports | 48 x 10/100BASE-TX PoE (802.3af compliant), 4 x SFP-based Gigabit ports |
| Tipus d'interfície | PoE, SFP |
| Velocitat de transferència de dades | 0.1 Gigabits Per Second (100 Mbps for Fast Ethernet, 1 Gbps for Gigabit SFP) |
| Dimensions del producte | 16.1 x 17.5 x 1.73 polzades |
| Pes de l'article | 15.5 lliures |
| Voltage | 240 Volts |
| Muntable en bastidor | Sí |
| Primera data disponible | 10 d'abril de 2004 |
7. Informació de la garantia
Specific warranty details for the Cisco Catalyst 3560 Series switches are typically provided at the point of purchase or can be found on the official Cisco website. Please refer to your purchase documentation or visit Cisco's Warranty Finder for the most up-to-date information regarding your product's warranty coverage.
8. Suport tècnic
For technical assistance, product documentation, or to download software and drivers, please visit the official Cisco Support website. You will need your product serial number to register and access certain support resources.
Suport de Cisco Weblloc: https://www.cisco.com/c/en/us/support/index.html
Before contacting support, please have your model number (WS-C3560-48PS-E) and any relevant error messages or troubleshooting steps you have already performed ready.
