1. Introducció
This manual provides detailed instructions for the safe and effective use of your Monacor GE 24V/250W Halogen Bulb (Model 37462). This high-quality halogen reflector lamp is designed for various projection and lighting applications, offering a bright and reliable light source. Please read this manual thoroughly before installation and operation to ensure proper function and longevity of the bulb.
Image 1.1: The Monacor GE 24V/250W Halogen Bulb, showcasing its GX5.3 base and reflector design.
2. Informació de seguretat
AVÍS: Les bombetes halògenes funcionen a altes temperatures i poden causar cremades o incendis si no es manipulen correctament. Deixeu sempre que la bombeta es refredi completament abans de manipular-la.
- Do not touch the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure or explosion. Use a clean cloth or gloves when handling.
- Assegureu-vos que el subministrament elèctric estigui desconnectat abans d'instal·lar, treure o netejar la bombeta.
- Only use the bulb in fixtures designed for its voltage (24V) and wattage (250W). Exceeding these limits can cause damage to the fixture or bulb, and pose a fire hazard.
- Mantingueu la bombeta lluny de materials inflamables.
- Dispose of broken or expired bulbs according to local regulations. Do not dispose of in general waste.
- If the bulb breaks, ventilate the area and carefully clean up glass fragments. Avoid direct contact with broken glass.
3. Configuració (Instal·lació)
Proper installation is crucial for the performance and safety of your halogen bulb.
- Apagar: Ensure the power to the fixture is completely turned off at the main switch or circuit breaker.
- Refredament: If replacing an old bulb, allow it to cool down completely before touching.
- Manejar amb cura: Using a clean, lint-free cloth or gloves, carefully remove the new bulb from its packaging. Avoid touching the glass envelope directly.
- Insereix la bombeta: Align the two pins of the GX5.3 base with the corresponding holes in the lamp holder. Gently push the bulb straight into the socket until it is firmly seated. Do not force it.
- Fixació segura: Reassemble any protective covers or housing of the lighting fixture according to the fixture's instructions.
- Encès: Restore power to the fixture. The bulb should illuminate.
Image 3.1: The Monacor GE 24V/250W Halogen Bulb shown with a hand for size comparison, illustrating its compact dimensions.
4. Funcionament
Once installed, operating the Monacor GE 24V/250W Halogen Bulb is straightforward:
- Ensure the bulb is correctly installed in a compatible 24V, 250W fixture.
- Turn on the power switch connected to the lighting fixture. The bulb will illuminate instantly.
- To turn off the bulb, simply switch off the power.
- Avoid frequent on/off cycling, as this can reduce the bulb's lifespan.
5. Manteniment
Minimal maintenance is required for this halogen bulb, but proper care can extend its life and maintain performance.
- Neteja: If the bulb's glass surface becomes dirty, turn off the power and allow the bulb to cool completely. Gently wipe the glass with a clean, dry, lint-free cloth. Do not use liquid cleaners, as they can leave residues that may cause hot spots.
- Substitució: When the bulb reaches the end of its life (average rated life is 50 hours), it will cease to function. Replace it following the installation steps outlined in Section 3. Always use a bulb with the correct voltage i wattage especificacions.
- Inspecció de fixacions: Periodically inspect the lighting fixture for any signs of wear, loose connections, or damage that could affect the bulb's performance or safety.
6. Solució De Problemes
If your Monacor GE 24V/250W Halogen Bulb is not functioning as expected, refer to the following common issues and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La bombeta no s'encén. | No hi ha poder per fixar. Bombeta no ben col·locada. La bombeta ha arribat al final de la seva vida útil. Faulty fixture or wiring. | Comproveu la font d'alimentació i l'interruptor. Turn off power, re-seat bulb firmly. Canvieu la bombeta per una de nova. Consulteu un electricista qualificat. |
| La bombeta parpelleja. | Connexió fluixa. Vol incorrectetage. Bombeta a punt de finalitzar la seva vida útil. | Turn off power, check bulb seating and fixture connections. Ensure fixture provides 24V. Substitueix la bombeta. |
| La bombeta es crema ràpidament. | Cicles freqüents d'encesa/apagada. Overvoltage. Touching glass with bare hands during installation. Poor ventilation in fixture. | Reduce frequent switching. Verifica el volum de l'aparelltage és 24V. Always use a cloth or gloves when handling. Ensure fixture allows for proper heat dissipation. |
7. Especificacions
Key technical specifications for the Monacor GE 24V/250W Halogen Bulb:
- Marca: Monacor (Manufacturer: GE)
- Número de model: 37462 (ELC)
- Tipus: Reflector halògen Lamp
- Voltage: 24 Volts
- Wattage: 250 watts
- Tipus de base: GX5.3
- Vida nominal mitjana: 50 hores
- Flux lluminós: 1200 lúmens
- Temperatura de color: Blanc
- Índex de reproducció del color (CRI): 80
- Dimensions: Aproximadament 5.59 x 5.08 x 4.83 cm (2.2 x 2.0 x 1.9 polzades)
- Pes: Aproximadament 9.07 g (0.32 oz)
8. Garantia i Suport
For information regarding warranty coverage and customer support for your Monacor GE 24V/250W Halogen Bulb, please refer to the original purchase documentation or contact your retailer. Specific warranty terms may vary depending on the point of purchase and regional regulations.
For technical inquiries or further assistance, please contact the Monacor customer service or the authorized distributor from whom you purchased the product.
