ButtKicker Advance BK4-4 Low Frequency Transducer User Manual

1. Producte acabatview

The ButtKicker Advance is a patented 4 ohm low frequency audio transducer designed to provide powerful tactile response. It features a 1 lb (0.45 kg) magnetically suspended piston, ensuring accuracy and durability. This unit is virtually indestructible and requires no maintenance.

With a frequency response range of approximately 5Hz to 200Hz, the ButtKicker Advance delivers strong tactile feedback without the high sound pressure levels typically associated with subwoofers. It is an ideal solution for enhancing the experience in various applications, including home theaters, gaming setups, music listening, and video watching.

Les característiques clau inclouen:

• Mid-sized ButtKicker transducer
• Side and bottom mounting flanges for versatile placement
• High quality spring terminal connectors
• 4 ohm impedance only

2. Configuració i instal·lació

Proper setup is crucial for optimal performance of your ButtKicker Advance transducer. This unit is designed for easy integration into various systems.

Requisits d'energia de 2.1

The ButtKicker Advance requires a minimum of 75 watts of power. For best results and full performance, a maximum of 400 watts is recommended. Please note that a power amplificador és no included with the ButtKicker Advance and must be purchased separately. The BKA300-4 amplifier is a compatible option.

2.2 Connexions de cablejat

The transducer connects to your power amplifier using high-quality spring terminal connectors. For standard installations, 14 gauge speaker wire is recommended. For longer wire runs, 12 gauge speaker wire should be used to minimize signal loss.

Ensure correct polarity when connecting the speaker wires to the amplifier and the ButtKicker Advance. Match the positive (+) terminal on the amplifier to the positive (+) terminal (red) on the transducer, and the negative (-) terminal on the amplifier to the negative (-) terminal (black) on the transducer.

2.3 Opcions de muntatge

The ButtKicker Advance features both side and bottom mounting flanges, offering versatility in placement. It can be securely attached to various structures such as couches, sectional sofas, gaming chairs, or platforms to transfer tactile effects directly to the user. Ensure the mounting surface is rigid to maximize the transfer of vibrations.

3. Instruccions de funcionament

Once properly installed and connected to a suitable amplifier, the ButtKicker Advance will convert low-frequency audio signals into kinetic energy, providing a physical sensation that enhances your audio experience.

3.1 Enhancing Your Experience

The transducer operates within a frequency range of approximately 5Hz to 200Hz. This range is specifically chosen to provide deep, impactful tactile feedback without generating audible sound, allowing for an immersive experience without disturbing others.

Ajusteu el amplifier's gain and crossover settings to fine-tune the intensity and frequency response of the ButtKicker Advance to your personal preference and the specific content you are enjoying. Experiment with different settings to find the optimal balance for movies, games, or music.

Usos recomanats:

• Teatre a casa: Feel explosions, rumbling engines, and deep bass notes.
• Jocs: Experience impacts, engine vibrations, and environmental effects.
• Escolta de música: Add a physical dimension to bass lines and drum beats.
• Video Watching: Enhance the realism of action sequences and special effects.

For optimal performance, ensure that the audio source provides a strong low-frequency signal. Some audio systems may require a dedicated low-pass filter or subwoofer output to feed the appropriate frequencies to the ButtKicker Advance ampmés viu.

4. Manteniment

The ButtKicker Advance is designed to be virtually indestructible and requires no regular maintenance. Keep the unit clean and free from dust and debris. Ensure all connections remain secure to prevent signal loss or intermittent performance.

5. Solució De Problemes

If you experience issues with your ButtKicker Advance, consider the following common troubleshooting steps:

• Sense vibració:
  • Check all cable connections between the audio source, amplifier, and transducer. Ensure they are secure and correctly polarized.
  • Verifiqueu el ampEl lifter està encès i rep un senyal d'àudio.
  • Confirmeu el amplifier's volume or gain is set appropriately.
  • Ensure the audio source is producing low-frequency content (e.g., deep bass in music or effects in movies/games).
• Vibració feble:
  • Augmentar el amplifier's gain or volume.
  • Check the power output of your amplifier; ensure it meets the recommended wattage for the ButtKicker Advance (75-400 watts).
  • Verify the mounting of the transducer. A loose or flexible mounting surface can absorb vibrations. Ensure it is securely attached to a rigid structure.
  • Adjust the low-pass filter settings on your amplifier or audio receiver to ensure sufficient low-frequency content is being sent to the transducer.
• Distorted or Unpleasant Vibration:
  • Reduir el amplifier's gain or volume. Overdriving the transducer can cause distortion.
  • Check for any physical obstructions or loose components near the transducer that might be rattling.
  • Ensure the transducer is mounted vertically (top or bottom facing directly up or down) as intended for optimal performance and to prevent bottoming out.

If problems persist after following these steps, please contact Buttkicker customer support for further assistance.

6. Especificacions

7. Garantia i Suport

For information regarding product warranty, returns, or technical support, please refer to the official Buttkicker weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.

You can visit the official Buttkicker Store on Amazon for more information: Buttkicker Store