DigiTech BP80 Bass Multi-Effects Processor

Introducció

The DigiTech BP80 is a versatile Bass Modeling multi-effects processor designed for bassists seeking a wide range of tones and effects. Powered by DigiTech’s AudioDNA™ DSP processor, it offers 16 bass amp and stompbox models, along with numerous other effects to craft your unique sound. Its integrated expression pedal allows for real-time control over various parameters, enhancing performance flexibility.

The BP80 features an intuitive interface for easy effect editing. It also includes a built-in Drum Machine for timing practice and a precise 13-LED chromatic tuner. The unit comes pre-loaded with 40 factory presets and provides 40 user preset locations for custom configurations.

Figura 1: Frontal view of the DigiTech BP80 Bass Multi-Effects Processor, showing the control panel, display, footswitches, and expression pedal.

Configuració

Before operating your BP80, ensure all connections are made correctly and securely. Use only the provided power supply to prevent damage.

1. Connexió d'alimentació: Connect the included 9V DC power supply to the "9VDC 300mA" input jack on the rear panel of the BP80. Plug the power supply into a standard AC outlet.
2. Entrada d'instrument: Connect your bass guitar to the "INPUT" 1/4" jack on the rear panel using a standard instrument cable.
3. Sortida a Amplificador/mesclador: Connect the "LEFT OUT" and/or "RIGHT OUT" 1/4" jacks to your bass amplifier, mixer, or audio interface. For mono operation, use the "LEFT OUT" jack.
4. Sortida d'auriculars: For silent practice, connect a pair of stereo headphones to the "1/8" stereo headphone output" jack.

Figure 2: Rear panel of the DigiTech BP80, showing the Input, Left Out, Right Out, Headphone, and Power Supply jacks.

Once all connections are made, the BP80 is ready to be powered on. The unit will display the current preset number.

Instruccions de funcionament

The BP80 offers a range of features accessible via its control panel and footswitches.

Controls acabatsview

• Pedals: Used for navigating presets (up/down) and engaging/bypassing effects.
• Pedal d'expressió: Controls real-time parameters such as Wah, Volume, or Whammy effects, depending on the preset.
• EDIT/EFFECT Buttons: Used to select effect categories for editing.
• VALUE/MASTER VOLUME Buttons: Adjust parameter values or the overall output volume.
• Botó BOTIGA: Saves edited presets to user locations.
• Botó DRUMS: Activa i controla la caixa de ritmes integrada.

Navegació predeterminada

The BP80 comes with 40 factory presets (01-40) and 40 user presets (41-80). Use the footswitches to scroll through presets. Press the left footswitch to decrease the preset number and the right footswitch to increase it.

Effect Editing

To edit an effect within a preset:

1. Premeu el botó EDIT/EFFECT buttons to cycle through the available effect categories (e.g., Chorus/Mod, Noise Gate, EQ, Delay, Reverb, Compressor, Fretless/Wah, Amp Model, Stompbox Model). The selected category will be indicated on the display.
2. Once an effect category is selected, use the VALUE/MASTER VOLUME buttons to adjust the parameters within that effect. The display will show the parameter value.
3. The BP80 features 16 bass amp and stompbox models, and 19 studio-quality effects. Experiment with different settings to achieve your desired tone.

Guardant els valors predefinits

After editing a preset, you can save your changes to one of the 40 user preset locations (41-80):

1. Premeu el botó BOTIGA button. The display will flash, indicating it's ready to save.
2. Use the footswitches to select the desired user preset location (41-80).
3. Premeu el botó BOTIGA button again to confirm and save the preset.

Màquina de tambor

The built-in Drum Machine is useful for timing practice:

• Premeu el botó TAMBORS button to activate the drum machine.
• Utilitza el EDIT/EFFECT buttons to select different drum patterns.
• Utilitza el VALUE/MASTER VOLUME buttons to adjust the tempo and volume level of the drum patterns.
• Premeu el botó TAMBORS button again to deactivate the drum machine.

Sintonitzador cromàtic

The BP80 includes a chromatic tuner for accurate instrument tuning:

• To activate the tuner, simultaneously press both footswitches. The display will show "IN TUNE" or indicate if the note is sharp or flat using the 13-LED array.
• Play a single note on your bass. Adjust your instrument's tuning until the display indicates the note is in tune.
• To exit the tuner, simultaneously press both footswitches again, or simply play through the unit.

Figura 3: Angle view of the DigiTech BP80, highlighting the expression pedal and control interface.

Manteniment

Proper care and maintenance will ensure the longevity of your DigiTech BP80.

• Neteja: Use a soft, dry cloth to clean the exterior of the unit. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish and internal components.
• Emmagatzematge: When not in use for extended periods, store the BP80 in a cool, dry place away from direct sunlight and extreme temperatures. Disconnect the power supply.
• Font d'alimentació: Always use the original DigiTech power supply. Ensure the power cable is not kinked or pinched.
• Medi ambient: Avoid exposing the unit to excessive moisture, dust, or vibrations.

Resolució de problemes

If you encounter issues with your BP80, try the following steps before seeking professional service:

• Sense sortida de so:
  • Check all cable connections (instrument, output to amp, power).
  • Ensure the BP80 is powered on and the display is active.
  • Verify the Master Volume setting is not at zero.
  • Bypass the unit to check if the issue is with the BP80 or other equipment in your signal chain.
• Distorted or Unwanted Sound:
  • Check input levels from your bass to ensure they are not too high, causing clipping.
  • Review the gain settings of the active amp model or stompbox effect.
  • Assegureu-vos el vostre amplifier's input is not overdriven.
• Expression Pedal Not Responding:
  • Ensure the expression pedal is assigned to a parameter within the current preset.
  • Check for any physical obstructions preventing full range of motion.
• Tuner Not Accurate:
  • Ensure only one string is vibrating when tuning.
  • Check instrument intonation.
• La unitat es congela o es comporta de manera erràtica:
  • Disconnect and reconnect the power supply to perform a soft reset.
  • If issues persist, consult the official DigiTech support resources.

For more detailed troubleshooting or advanced issues, refer to the comprehensive manual available on the DigiTech weblloc o poseu-vos en contacte amb el seu servei d'atenció al client.

Especificacions

Garantia i Suport

For detailed warranty information regarding your DigiTech BP80 Bass Multi-Effects Processor, please refer to the warranty card included with your product or visit the official DigiTech weblloc web. Els termes i condicions de la garantia poden variar segons la regió i la data de compra.

For technical support, product registration, or to download the latest firmware updates and comprehensive user manuals, please visit the official DigiTech support page. Keeping your product registered and updated ensures you receive the best possible support and performance.

Note: Always ensure you are using official DigiTech resources for support and information.