Introducció
The Shure 55SH Series II is a dynamic microphone designed for vocal applications, offering a classic vintage aesthetic combined with modern sound quality. Its cardioid polar pattern minimizes sound pickup from the rear, making it suitable for live performances and studio recording by reducing feedback.
Característiques clau
- Vintage Estil: Classic look and feel inspired by the original Shure Unidyne microphone from the 1930s.
- Qualitat de so rica: Dynamic cartridge with a cardioid polar pattern and tailored frequency response for natural sound reproduction.
- Construcció robusta: All-metal construction with a chrome-plated die-cast casing for durability and a vintagi estètica.
- Shock-Mounted Design: Internal shock mount reduces handling noise and vibrations for clearer sound.
- Versàtil: Ideal for live performances, podcasting, broadcasting, studio recording, and more.
- Ampli rang de freqüències: 50 Hz to 15 kHz frequency response captures a range of vocal and instrumental frequencies.
- Eficient: High output level for clean and accurate signal transfer.
- Fàcil d'utilitzar: Plug-and-play design with XLR connector for easy setup and compatibility with a range of audio interfaces.
Contingut del paquet
- 1 55SH Dynamic Microphone
- 1 95A2050 5/8" to 3/8" Thread Adapter
Configuració
Col·locació del micròfon
The 55SH Series II features an adjustable swivel mount. Loosen the side screws to adjust the microphone's angle between 30 degrees forward and 45 degrees backward. Tighten the screws to secure the position.
Connexió del micròfon
Connect a standard XLR cable (not included) to the 3-pin XLR connector located at the base of the microphone. Ensure a secure connection.
The microphone includes an on/off switch. Slide the switch to the "ON" position to activate the microphone and to the "OFF" position to mute it.
The Shure 55SH Series II microphone with its classic chrome finish and integrated swivel mount.
Un primer pla view of the microphone's base, highlighting the 3-pin XLR connector for audio output and the threaded insert for stand mounting.
Instruccions de funcionament
Ús òptim
The 55SH Series II is designed for vocal applications. Position the microphone directly in front of the sound source, speaking into the mesh grille.
Patró polar
This microphone utilizes a cardioid (unidirectional) polar pickup pattern. This design effectively minimizes sound pickup from the rear, reducing feedback in live settings and isolating the desired sound source.
A graph illustrating the frequency response of the Shure 55SH Series II microphone, showing its tailored response for vocal clarity.
Manteniment
- Mantingueu el micròfon net netejant-lo amb un drap suau i sec.
- Avoid exposing the microphone to extreme temperatures, humidity, or direct sunlight.
- Guardeu el micròfon a la seva funda de transport quan no l'utilitzeu per protegir-lo de la pols i els danys físics.
- Comproveu regularment les connexions dels cables per detectar desgast i garantir un rendiment òptim.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense so | Microphone switch is OFF | Slide the on/off switch to the "ON" position. |
| Sense so | XLR cable not connected properly | Ensure the XLR cable is securely connected to both the microphone and the audio interface/mixer. |
| Sense so | Audio interface/mixer input gain too low | Increase the input gain on your audio interface or mixer. |
| Feedback/Humming | Microphone too close to speakers or monitors | Reposition the microphone further from sound output sources or adjust monitor levels. |
| Feedback/Humming | Interferència del cable | Use high-quality, shielded XLR cables to minimize interference. |
| So distorsionat | Guany d'entrada massa alt | Redueix el guany d'entrada a la interfície d'àudio o al mesclador. |
Especificacions tècniques
| Característica | Valor |
|---|---|
| Impedància | 150 ohms |
| Factor de forma del micròfon | Portàtil |
| Dimensions de l'article (L x A x A) | 7.5 x 2.18 x 3.1 polzades |
| Font d'alimentació | Elèctric amb cable |
| Material | Chrome die-cast metal |
| Ràtio senyal / soroll | 76 dB |
| Nombre de canals | 1 |
| Resposta de freqüència | 50 Hz a 15 kHz |
| Pes de l'article | 1.8 lliures |
| Patró polar | Unidireccional (cardioide) |
| Tecnologia de connectivitat | XLR |
| Tipus de connector | XLR |
| Usos recomanats | Cantant |
Garantia i Suport
The Shure 55SH Series II microphone comes with a 2-year limited warranty. For detailed warranty information, product support, or service inquiries, please visit the official Shure weblloc o poseu-vos en contacte amb el seu servei d'atenció al client.
An official brand video from Shure Incorporated, highlighting their dedication to extraordinary sound and product quality.