Broan-NuTone BEL6 Bathroom Exhaust Fan with LED Light

1. Introducció

The Broan-NuTone BEL6 Roomside Series ENERGY STAR bathroom exhaust fan with LED light is designed for versatile and easy installation, including retrofitting without attic access and no drywall cutting. This fan effectively reduces moisture and odors in bathrooms up to 45 sq. ft. with quiet operation at 0.9 sones. Its modern CleanCover grille offers a seamless design and simplifies cleaning.

Figure 1: Key features of the Broan-NuTone BEL6 Bathroom Exhaust Fan.

2. Informació de seguretat

ADVERTIMENT: Per reduir el risc d'incendi, descàrrega elèctrica o lesions a les persones, observeu el següent:

• Desconnecteu sempre l'alimentació al panell de servei abans de fer el manteniment o la neteja de la unitat.
• Els treballs d'instal·lació i el cablejat elèctric han de ser realitzats per persones qualificades d'acord amb tots els codis i estàndards aplicables, inclosos els codis i normes de construcció antiincendis.
• Utilitzeu aquesta unitat només de la manera prevista pel fabricant. Si teniu preguntes, poseu-vos en contacte amb el fabricant.
• Utilitzeu ulleres de seguretat durant la instal·lació.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• Ventilador
• Muntatge de bufador
• Panell de cablejat
• Tancament de filferro
• Connector de conducte
• Cargols
• Mask (for drywall protection)
• Grille Trim
• Grille with LED Light Module

Figura 2: Explotat view of the BEL6 fan components.

4. Eines necessàries

Normalment es necessiten les eines següents per a la instal·lació:

• Trepant
• Tornavís
• Cable Clamp Connector
• Conductes
• Cinta d'alumini
• Filferro
• Ulleres de seguretat

5. Instruccions d'instal·lació

This section outlines the steps for installing your Broan-NuTone BEL6 exhaust fan. For a visual guide, please refer to the installation video below.

5.1. Preparació de la unitat

1. Remove the blower assembly and wiring panel from the fan housing.

5.2. Mounting the Housing

2. Mount the fan housing securely to the ceiling structure using appropriate fasteners. The design features foldable mounting ears for versatile installation.

Figura 3: Explotat view highlighting internal components and mounting features.

5.3. Duct Connector Installation

3. Install the duct connector with the included screws, ensuring the tabs engage in the housing.
4. Attach the ductwork to the connector using foil tape for a secure seal.

5.4. Connexió del cablejat

5. Connect the electrical wiring according to local codes and the wiring diagram provided in the full manual.
6. Attach the wire enclosure by tab and screw, then reinstall the wiring panel and secure it.

5.5. Blower Assembly Installation

7. Install the blower assembly back into the housing and plug it in.

5.6. Grille and LED Module Installation

8. Once drywall is complete, install the grille trim.
9. Plug in the LED module.
10. Install the grille by sliding the clips into the grille trim. The patented SlideClip technology allows for fast, springless attachment.

Figure 4: Detail of the SlideClip grille for easy installation.

6. Funcionament

The Broan-NuTone BEL6 fan provides effective ventilation for rooms up to 45 sq. ft. Its 0.9 sones rating ensures quiet operation, making it barely noticeable while effectively removing moisture and odors. The integrated LED light provides illumination for your bathroom space.

Figure 5: The BEL6 fan installed in a bathroom ceiling.

7. Manteniment

Regular cleaning helps maintain optimal performance and appearance. The CleanCover grille offers a seamless design that blends into the ceiling and is easy to clean. Simply remove the grille and wipe it down with a damp cloth. Ensure power is disconnected before any cleaning or maintenance.

Figure 6: The CleanCover grille provides a seamless look and is easy to maintain.

8. Solució De Problemes

If the fan does not operate or the light does not turn on, check the following:

• Ensure the power supply is connected and the circuit breaker is on.
• Verify all wiring connections are secure and correctly installed.
• Check if the LED module is properly plugged into the blower assembly.
• Inspect for any obstructions in the fan or ductwork.

If issues persist, consult a qualified electrician or contact Broan-NuTone customer support.

9. Especificacions

Figure 7: Dimensions of the BEL6 fan unit.

10. Garantia i Suport

For warranty information, technical support, or replacement parts, please refer to the official Broan-NuTone weblloc web o poseu-vos en contacte amb el servei d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.