Introducció
The WAYNE CDU790 is a 1/3 HP submersible sump pump designed for efficient and reliable water removal from basements and other areas prone to flooding. Constructed with durable cast iron and stainless steel, this pump is built for long-lasting performance. Its integrated vertical float switch and top suction design ensure optimal operation, preventing airlocks and minimizing clogging from debris. This manual provides essential information for the proper installation, operation, and maintenance of your WAYNE CDU790 sump pump.
Característiques clau

Figure 1: The WAYNE CDU790 1/3 HP Submersible Sump Pump.
- Només per a ús interior: Ideal for keeping basements dry during heavy water flow, capable of pumping up to 4,600 gallons per hour (GPH).
- Tough And Durable: Features corrosion-resistant epoxy coated steel motor housing, stainless steel fasteners, and a cast-iron volute for extended life in demanding sump pump applications.
- Disseny eficient: The top suction design effectively eliminates air lock and minimizes clogging caused by debris in the sump pit.
- Fàcil instal·lació: Designed for quick setup, typically within 15 minutes, without the need for drilling a weep hole or complex plumbing changes.
- Integrated Vertical Float Switch: Tested for 1 million cycles, providing reliable and long-lasting automatic operation.
- 1-1/2" NPT Discharge: Ensures compliance with standard building codes for discharge connections.
- Muntat als EUA: Proudly assembled in the USA, ensuring quality and dependable, ultra-quiet performance.

Figure 2: Key features of the WAYNE sump pump, highlighting easy installation, durability, and US assembly.

Figura 3: Detallada view of the sump pump's components and design benefits.
Configuració i instal·lació
Proper installation is crucial for the optimal performance and longevity of your WAYNE CDU790 sump pump. Follow these steps carefully:
- Prepare the Sump Basin: Assegureu-vos que el càrter basin is clean and free of debris. The pump is designed for 11-inch diameter or larger sump basins. A minimum basin height of 22 inches is required.
- Posició de la bomba: Place the pump on the bottom of the basin, ensuring it is stable and facing away from the inlet pipe. The integrated vertical float switch should have clear movement without obstruction.
- Install Discharge Plumbing: Connect the 1-1/2 inch NPT discharge pipe to the pump. Install a check valve to prevent back-flow of water into the sump pit.
- Install Gate/Ball Valve (Optional but Recommended): If desired, install a gate or ball valve in the discharge line to allow for easy pump removal or maintenance without draining the entire system.
- Cable d'alimentació segur: Secure the power cord along the discharge pipe to prevent it from interfering with the float switch or becoming submerged unnecessarily.
- Prova la bomba: Ompliu la basin with water to activate the pump and ensure it is working properly. Observe the float switch operation and water discharge.

Figure 4: Illustrated installation instructions for the sump pump.

Figure 5: The pump features an easy-carry handle for portability and simple installation.
Funcionament
The WAYNE CDU790 sump pump operates automatically via its integrated vertical float switch. When water levels in the sump basin rise, the float switch will lift, activating the pump. The pump will then discharge water through the connected plumbing until the water level drops, causing the float switch to lower and deactivate the pump. This automatic cycle ensures your basement remains dry without constant manual intervention.
Vídeo 1: Producte acabatview of the WAYNE Sump Pump, demonstrating its features and quiet operation.
Video 2: Demonstration of a similar WAYNE sump pump (CDU800 series) in operation, showcasing its performance and quietness.
Manteniment
Un manteniment regular ajuda a garantir la fiabilitat a llarg termini de la bomba de desguàs. Feu les comprovacions següents periòdicament:
- Inspect the Sump Pit: Regularly check the sump pit for any debris, dirt, or sediment that could obstruct the pump's operation or clog the intake. Clean as necessary.
- Test the Float Switch: Pour water into the sump pit to manually activate the pump. Ensure the float switch moves freely and activates/deactivates the pump correctly.
- Comprovació del tub de descàrrega: Verify that the discharge pipe is free of obstructions and that water is flowing freely away from your home.
- Inspeccioneu el cable d'alimentació: Check the power cord for any signs of damage, fraying, or wear.
- Escolteu els sorolls inusuals: During operation, listen for any unusual noises, vibrations, or signs of strain from the pump, which could indicate a problem.
Resolució de problemes
If your WAYNE CDU790 sump pump is not operating as expected, consider the following common troubleshooting steps:
- La bomba no s'encén:
- Check if the pump is plugged in and receiving power.
- Ensure the float switch is not obstructed and can move freely to activate the pump.
- Verifiqueu que l'interruptor automàtic no s'hagi disparat.
- Bomba funcionant contínuament:
- Check if the float switch is stuck in the "on" position or is obstructed.
- Inspect the check valve for proper function; a faulty check valve can cause water to flow back into the pit.
- Ensure there is no continuous water source feeding into the sump pit.
- Pump Not Pumping Water:
- Check for clogs in the intake screen or discharge pipe.
- Ensure the pump is fully submerged in water when it activates.
- Verify that the impeller is not damaged or obstructed.
- Sorolls inusuals:
- Foreign objects in the impeller can cause grinding or rattling noises. Disconnect power and inspect.
- Air trapped in the pump or discharge line can cause gurgling sounds. Ensure the top suction design is clear.
For more detailed troubleshooting or if issues persist, refer to the official user manual or contact Wayne customer support.
Especificacions
| Especificació | Detall |
|---|---|
| Marca | Wayne |
| Model | CDU790 |
| Cavalls de força | 1/3 CV (0.3 CV) |
| Caudal màxim | 4,600 GPH (63 galons per minut) |
| Alçada màxima d'elevació | 10 peus |
| Voltage | 120 Volts |
| Material | Ferro colat, acer inoxidable |
| Dimensions del producte | 10.5 cm de llargada x 9 cm d'amplada x 11 cm d'alçada |
| Pes de l'article | 16 lliures |
| Mida de descàrrega | 1-1/2" NPT |
| País d'origen | China (Assembled in USA) |

Figure 6: Product dimensions and flow rate details for the CDU790.
Garantia i Suport
The WAYNE CDU790 sump pump comes with a Garantia limitada de 3 anys, ensuring dependable performance. For detailed warranty information, technical support, or service inquiries, please refer to the official documentation or contact Wayne customer service.
- Manual d'usuari (PDF): Descarrega el manual d'usuari
- Manual d'instal·lació (PDF): Descarrega el manual d'instal·lació
- Visit Wayne Store: Wayne Official Store on Amazon





