Manual d'usuari del transmissor sense fil Ademco Honeywell 5816

1. Introducció

The Ademco Honeywell 5816 is a wireless two-zone transmitter designed for integration with compatible security systems. This device provides reliable security monitoring for doors and windows by detecting their open or closed status. It features a built-in magnetic reed switch and also supports an external wired closed-circuit contact loop, offering versatile installation options.

2. Característiques del producte

• Wireless two-zone operation for flexible monitoring.
• Integrated magnetic reed switch for standard door/window contact.
• Support for an external wired closed-circuit contact loop (Loop 4).
• Includes a long-life CR123 Lithium Ion battery.
• Tampdetecció d'errors per a una seguretat millorada.

3. Contingut del paquet

Verifiqueu que hi hagi tots els elements abans de començar la instal·lació:

• Ademco Honeywell 5816 Wireless Transmitter unit
• Placa de muntatge
• Magnet (typically 5899 magnet)
• Espaciador magnètic
• Cargols de muntatge
• Cinta adhesiva de doble cara
• CR123 Lithium Ion battery

4. Configuració i instal·lació

Proper installation ensures optimal performance and reliable security. Refer to your security system's control panel manual for specific programming instructions.

4.1. Instal·lació de la bateria

1. Open the transmitter casing by gently pressing the tab on the bottom and lifting the cover.
2. Insert the supplied CR123 Lithium Ion battery, observing the correct polarity (+/-).
3. Tanqueu la coberta de manera segura.

4.2. Mounting the Transmitter and Magnet

The transmitter and magnet should be mounted on the door/window frame and the moving part (door/window) respectively, ensuring they are aligned and within approximately 1 inch (2.5 cm) of each other when the door/window is closed.

Imatge 1: Davant view of the Ademco Honeywell 5816 Wireless Transmitter. This image displays the compact, rectangular design of the transmitter unit, typically mounted on a door or window frame.

1. Choose a mounting location on the door or window frame where the transmitter will not interfere with operation and is protected from damage.
2. Mount the transmitter using the provided screws or double-sided adhesive tape. Ensure the mounting plate is secured first, then attach the transmitter.
3. Mount the magnet on the corresponding moving part (door or window) directly opposite the reed switch marking on the transmitter. Use the magnet spacer if necessary to achieve proper alignment and gap.
4. Test the alignment by opening and closing the door/window. The security system should register the change in status.

4.3. Wiring an External Contact (Optional)

The 5816 transmitter supports an external wired closed-circuit contact loop (Loop 4). This allows for monitoring of a separate device or a different type of contact.

1. Connect the external contact wires to the designated terminals inside the transmitter.
2. Ensure connections are secure and properly insulated.
3. Program the external loop (Loop 4) into your security system's control panel as per its instructions.

5. Instruccions de funcionament

The Ademco Honeywell 5816 operates by wirelessly transmitting signals to your security system's control panel when a change in its contact status occurs.

• Funcionament normal: When the door or window is closed, the magnet is in close proximity to the transmitter's reed switch, indicating a closed state.
• Estat obert: When the door or window is opened, the magnet moves away from the transmitter, causing the reed switch to open. The transmitter then sends an "open" signal to the control panel.
• External Contact: If an external contact is wired, it will transmit signals based on its own open/closed status, independent of the internal reed switch.
• TampDetecció: If the transmitter's cover is removed, a tamper signal will be sent to the control panel, indicating unauthorized access to the device.

The control panel interprets these signals and responds according to its programming (e.g., sounding an alarm, sending notifications).

6. Manteniment

6.1. Substitució de la bateria

The 5816 transmitter uses one CR123 Lithium Ion battery, which typically has a life of approximately 5 years. Your security system will usually provide a low battery warning when replacement is needed.

1. Disarm your security system to prevent false alarms during battery replacement.
2. Gently press the tab on the bottom of the transmitter and remove the front cover. This action may trigger a tamper alert on your control panel, which can be cleared after replacement.
3. Traieu amb cura la pila CR123 antiga.
4. Insert a new CR123 Lithium Ion battery, ensuring correct polarity.
5. Replace the front cover, ensuring it snaps securely into place.
6. Verify that the transmitter is communicating with the control panel by testing the door/window.

6.2. Neteja

Clean the exterior of the transmitter and magnet periodically with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the casing.

7. Solució De Problemes

If issues persist, consult your security system's control panel manual or contact a qualified security technician.

8. Especificacions

9. Garantia i Suport

Specific warranty information for the Ademco Honeywell 5816 Wireless Transmitter is typically provided at the point of purchase or through your security system installer. Please retain your proof of purchase for warranty claims.

For technical support, programming assistance, or troubleshooting beyond the scope of this manual, please contact your security system provider or a certified Honeywell/Ademco dealer.

10. Recursos addicionals

For further details on integrating this transmitter with your specific security system, refer to the installation and programming guides for your Honeywell or Ademco control panel.

No official product videos are available for inclusion in this manual.