1. Introducció
The Invicta Pro Diver Chronograph Watch Model 0070 is a robust and stylish timepiece designed for men. It features a blue dial with round indexes, a chronograph function, and a durable stainless steel bracelet and case. This watch is suitable for both casual and sporty occasions, offering reliability and style in a 48mm round case. It is water-resistant up to 200 meters, making it suitable for professional marine activity and serious surface water sports, but not scuba diving.

Figura 1: Frontal view of the Invicta Pro Diver Chronograph Watch Model 0070.
2. Configuració
2.1 Configuració de l'hora i la data
- Traieu la corona: Gently pull the crown (the knob on the side of the watch) to position 2.
- Estableix l'hora: Gireu la corona en sentit horari o antihorari per ajustar les agulles de les hores i els minuts a l'hora desitjada.
- Estableix la data: Pull the crown out to position 1. Turn the crown to adjust the date. Push the crown back to position 0 to secure.
- Empenyeu la corona: Once the time and date are set, push the crown back into position 0 to start the watch and ensure water resistance.
2.2 Ajust del braçalet
The stainless steel bracelet can be adjusted by removing or adding links. It is recommended to have a professional jeweler perform this adjustment to prevent damage to the watch or bracelet. The clasp also features a micro-adjustment pin for fine-tuning the fit.

Figura 2: lateral view showing the crown and chronograph pushers.
3. Operating the Chronograph and Bezel
3.1 Using the Chronograph Function
The chronograph function allows for precise timing of events. The watch features three sub-dials for seconds, minutes, and hours.
- Inici: Premeu el polsador superior (A) per iniciar el cronògraf. La maneta dels segons del cronògraf començarà a moure's.
- Atura: Press the top pusher (A) again to stop the chronograph. The elapsed time will be indicated on the sub-dials.
- Restablir: Press the bottom pusher (B) to reset the chronograph to zero.
3.2 Using the Unidirectional Rotating Bezel
The unidirectional rotating bezel can be used to measure elapsed time, typically for diving or other timed activities. To use:
- Align the zero mark on the bezel with the minute hand at the start of your activity.
- Read the elapsed time on the bezel against the minute hand. The bezel only rotates counter-clockwise, preventing accidental overestimation of elapsed time.

Figure 3: The watch worn on a wrist, showcasing el seu disseny.
4. Manteniment
4.1 Resistència a l'aigua
This watch is water-resistant to 200 meters (20 ATM). This rating means it is suitable for professional marine activity and serious surface water sports. It is generally not suitable for scuba diving unless specified otherwise. Always ensure the crown is fully pushed in before exposing the watch to water.
4.2 Neteja
Per netejar el rellotge, netegeu-lo amb un drap suau iamp cloth. For the metal bracelet, a soft brush with mild soap and water can be used, followed by thorough rinsing and drying. Avoid using harsh chemicals or abrasive materials.
4.3 Substitució de la bateria
The watch uses a Japanese Quartz movement and requires 1 Lithium Ion battery (included). Battery replacement should be performed by a qualified watch technician to maintain water resistance and ensure proper function.
Vídeo 1: Presentació oficial del producte en vídeoasing the Invicta Men's Pro Diver Collection Chronograph Watch.
5. Solució De Problemes
5.1 Watch Not Keeping Time
- Comproveu la corona: Assegureu-vos que la corona estigui completament empenta a la posició 0. Si es treu, el rellotge no funcionarà.
- Bateria: If the watch is a quartz model and stops, the battery may need replacement. Consult a professional watch technician.
5.2 Aigua dins del rellotge
- If you notice condensation or water inside the watch, immediately take it to a qualified watch technician. Do not attempt to open the watch yourself, as this can void the warranty and cause further damage.
6. Especificacions
| Tipus de visualització | Analògic |
| Índexs | 12 h Dial, Round Indexes |
| Diàmetre de la caixa | 48 mil·límetres |
| Gruix de la caixa | 15 mil·límetres |
| Material de la caixa | Acer inoxidable |
| Case Finish | Raspallat |
| Color del dial | Blau |
| Tipus de cristall | Flame-Fusion |
| Material de la banda | Acer inoxidable |
| Color de banda | Plata |
| Amplada de banda | 19 mil·límetres |
| Longitud de banda | 11 polzades |
| Tipus de tancament | Fold-Over-Clasp-With-Safety |
| Tipus de moviment del rellotge | Quars japonès |
| Font d'alimentació | Funciona amb bateria (1 bateria d'ions de liti inclosa) |
| Profunditat de resistència a l'aigua | 200 metres (660 peus) |
| Pes de l'article | 0.69 lliures |
7. Garantia i assistència
7.1 Garantia del fabricant
This Invicta watch is covered by a manufacturer's warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or visit the official Invicta weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.
7.2 Atenció al client
For any questions, service, or repair needs not covered in this manual, please contact Invicta customer support. Contact information can typically be found on the official Invicta weblloc web o a l'embalatge del producte.





