Progress Lighting P5791-68 Instruction Manual

Introducció

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P5791-68 Transitional Two Wall or Ceiling Fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference. This fixture is designed for versatility, suitable for both indoor and outdoor applications, including high-traffic areas like garages and workrooms, as well as general security lighting.

Informació de seguretat

ADVERTIMENT:

Always turn off power at the main fuse or circuit breaker box before beginning installation, servicing, or changing bulbs. Failure to do so may result in electrical shock or serious injury.
Consult a qualified electrician if you are unsure about the installation process or have any electrical questions.
Totes les connexions elèctriques han de complir els codis locals, les ordenances o el Codi Elèctric Nacional (NEC).
This fixture is UL listed for wet locations, making it suitable for both indoor and outdoor use. However, ensure all connections are properly sealed and protected from moisture.
No supereu la potència màximatage specified for the bulbs (75 Watts per socket). Over-wattage can lead to overheating and fire hazards.
Handle the fixture and bulbs with care to prevent breakage or injury.

Producte acabatview

The Progress Lighting P5791-68 is a robust two-light fixture featuring an impact-resistant polycarbonate diffuser and a durable construction. Its design allows for flexible installation as either a wall-mounted sconce or a ceiling-mounted fixture. The white finish provides a clean, transitional aesthetic that blends with various decors.

Figure 1: Progress Lighting P5791-68 Transitional Two Wall or Ceiling Fixture. This image displays the complete assembled fixture, highlighting its white finish and the textured polycarbonate diffuser.

Configuració i instal·lació

Before beginning installation, ensure all components are present and undamaged. It is recommended to have a helper during installation. Refer to the diagram below for a visual representation of the fixture's form factor.

Figure 2: Line drawing illustrating the general shape and potential mounting orientation of the P5791-68 fixture, useful for understanding installation points.

Preparació per a la instal·lació: Turn off the electrical power at the main fuse box or circuit breaker. Ensure the power is completely off before proceeding.
Instal·lació del suport de muntatge: Secure the fixture's mounting bracket (typically included with the fixture, though not explicitly detailed in the product description) to the electrical junction box in the wall or ceiling. Use the screws provided with the junction box or fixture. Ensure the bracket is firmly attached and level.
Connexions elèctriques:
- Connecteu el cable blanc del dispositiu al cable blanc (neutre) de la caixa de connexions.
- Connect the black wire from the fixture to the black (hot) wire from the junction box.
- Connect the bare copper or green ground wire from the fixture to the ground wire from the junction box or the ground screw on the mounting bracket.
- Secure all wire connections with approved wire connectors (wire nuts). Ensure no bare wire is exposed.
Muntatge de l'aparell: Carefully tuck all wires into the junction box. Align the fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the mounting surface.
Instal·leu les bombetes: Insert two (2) 75-Watt maximum medium base bulbs into the porcelain medium base sockets. Do not overtighten the bulbs.
Connecteu el difusor: Secure the polycarbonate diffuser to the fixture body. Ensure it is properly seated and fastened according to the fixture's design.
Restaura l'alimentació: Turn the electrical power back on at the main fuse box or circuit breaker. Test the fixture to ensure it operates correctly.

Instruccions de funcionament

The Progress Lighting P5791-68 fixture operates via a standard wall switch (not included). Once installed and wired correctly, simply toggle the wall switch to turn the light fixture on or off.

Assegureu-vos el wat correctetage bulbs (up to 75W per socket) are installed for optimal performance and safety.
This fixture is designed for continuous use in appropriate environments (wet locations rated).

Manteniment

Regular maintenance will help preserve the appearance and functionality of your fixture and ensure its longevity.

Neteja: To clean the fixture, turn off the power at the circuit breaker and allow the fixture and bulbs to cool completely. Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners, solvents, or polishes, as they may damage the finish or the polycarbonate diffuser.
Substitució de bombetes: Always turn off the power at the circuit breaker before replacing bulbs. Allow bulbs to cool completely before touching. Carefully unscrew the old bulb and screw in a new one of the same type and wattage (max 75W medium base). Ensure the new bulb is securely seated.
Inspecció: Periodically inspect the wiring and connections for any signs of wear, fraying, or damage. If any issues are found, turn off the power immediately and consult a qualified electrician for repair or replacement.

Resolució de problemes

If you encounter issues with your Progress Lighting P5791-68 fixture, refer to the table below for common problems and their solutions.

Problemes comuns i solucions
Problema	Causa possible	Solució
La llum no s’encén.	No hi ha energia a l’aparell. Connexions de cable soltes. Bombeta defectuosa.	Check circuit breaker or fuse and reset if tripped. Verify all wire connections are secure (ensure power is OFF first!). Replace bulb with a new, known-good one.
La llum parpelleja o s'atenua.	Bombeta solta. Connexió de cable solta. Tipus/potència de bombeta incorrectestage. Interruptor regulador d'intensitat incompatible (si escau).	Estrenyeu bé la bombeta. Check wire connections (power OFF first!). Ensure bulb is correct type and wattage (màx. 75 W). Verify dimmer switch is compatible with incandescent/LED bulbs used.
El dispositiu brunzeix.	Interruptor regulador d'intensitat incompatible (si escau). Loose components within the fixture.	Ensure dimmer is compatible with the fixture and bulb type. Turn off power and gently check for any loose internal components.

If the problem persists after attempting these solutions, please contact a qualified electrician or Progress Lighting customer support for further assistance.

Especificacions

Número de model: P5791-68
Marca: Il·luminació de progrés
Dimensions: 10-1/2-Inch Width x 4-Inch Height (Product Dimensions: Approximately 6 x 11 x 11 inches)
Material: Polycarbonate (diffuser), Glass, Metal
Acabat: White (Fixture), Clear (Diffuser)
Font de llum: 2 x Medium Base Bulbs (not included)
Max Wattage: 75 Watts per socket (150 Watts total)
Voltage: 120 Volts
Classificació de seguretat: UL-CUL Listed for Wet Locations
Tipus de muntatge: Muntatge a la paret, al sostre
Pes de l'article: Aproximadament 3 lliures
Estil: Transitional / Contemporary
UPC: 785247579181

Garantia i Suport

This Progress Lighting P5791-68 fixture comes with a manufacturer's warranty to cover defects in materials and workmanship. Please refer to the original purchase documentation or the manufacturer's weblloc web per conèixer els termes i condicions específiques de la garantia.

Descripció de la garantia: 1 any.
For technical assistance, replacement parts, or warranty claims, please contact Progress Lighting customer support.
Visit the official Progress Lighting website or their store on Amazon for the most up-to-date contact information and product resources: Progress Lighting Store on Amazon

	Progress Lighting 7206EB Assembly and Installation Instructions Detailed assembly and installation guide for the Progress Lighting 7206EB fluorescent ceiling fixture, including safety warnings, parts identification, and step-by-step instructions in English, Spanish, and French.
	Guia de muntatge i instal·lació del llum de sostre Progress Lighting 400164/400165 Instruccions detallades de muntatge i instal·lació per als canelobres Progress Lighting, models 400164 i 400165. Apreneu a instal·lar amb seguretat el vostre nou aparell d'il·luminació.
	Guia d'instal·lació de Progress Lighting P350232 3-LT Semi-Flush Convert Instruccions d'instal·lació detallades per al llum semiencastrato convertible de 3 llums Progress Lighting P350232. Inclou el contingut del paquet, els accessoris, la informació de seguretat, la preparació, la cura, els passos de muntatge per al muntatge al sostre i penjant i els detalls de la garantia.
	Progress Lighting 52" Axion II Ceiling Fan - Installation and Operating Manual This comprehensive instruction manual provides detailed guidance for the installation, operation, and maintenance of the Progress Lighting 52" Axion II ceiling fan (Model P250123). It includes safety rules, parts lists, mounting instructions, electrical connections, and troubleshooting tips.
	Guia d'instal·lació del llum de sostre semiencastat de 4 llums Progress Lighting P350270 Pinellas Guia d'instal·lació completa per al llum de sostre semiencastat de 4 llums Progress Lighting P350270 Pinellas. Inclou el contingut del paquet, els accessoris, les precaucions de seguretat, el muntatge pas a pas, les connexions elèctriques i la informació de la garantia.
	Guia d'instal·lació del rebedor Progress Lighting P500445 de 3 litres \| Col·lecció Pinellas Guia completa d'instal·lació i muntatge del llum penjant Progress Lighting P500445 3-LT FOYER de la Pinellas Collection. Inclou el contingut del paquet, detalls del maquinari, precaucions de seguretat, instruccions pas a pas i informació sobre la garantia.