1. Introducció
Thank you for choosing the Hunter 44760 Multi-Stage Heat Pump Thermostat. This device is designed to provide efficient and precise control over your home's heating and cooling system. It is compatible with single and multi-stage heat pump systems, controlling one stage of cooling and two stages de calor.
Key features of your Hunter 44760 thermostat include:
- Auto Season Changeover: Automatically switches between heating and cooling modes.
- INDIGLO Backlit Display: Proporciona una visibilitat clara en diverses condicions d'il·luminació.
- Pre-Programmed Temperature & Vacation Overrides: Allows temporary adjustments or extended holds.
- Energy Monitor: Tracks system usage time to help manage energy consumption.
- Indicador de canvi de filtre: Reminds you when to replace your system's air filter.
- Recuperació automàtica: Helps maintain comfort while optimizing energy use.
- Avís de bateria baixa: T'avisa quan cal substituir les piles.
- Còpia de seguretat de la bateria: Conserva la configuració durant l'apagadatages (requires 2 AAA batteries, not included).
2. Instal·lació
The Hunter 44760 thermostat is designed for easy do-it-yourself installation. Please follow these instructions carefully to ensure proper setup and operation.
2.1 Abans de començar
- Apagueu l'alimentació to your heating and cooling system at the main circuit breaker or fuse box before beginning installation.
- Ensure you have the necessary tools: screwdriver, wire stripper/cutter, and electrical tape.
- Confirm your system is compatible with a multi-stage termòstat de la bomba de calor.
2.2 Removing Your Old Thermostat and Wiring
- Carefully remove the cover of your existing thermostat.
- Before disconnecting any wires, label each wire with the corresponding terminal letter from your old thermostat. This is crucial for correct wiring of the new thermostat.
- Disconnect the wires and remove the old thermostat's wall plate.
Image: Hunter 44760 Thermostat packaging illustrating key features and simplified installation steps. The top right corner shows a visual guide for removing the existing thermostat, labeling wires, installing the new wall plate, and attaching the cover.
2.3 Muntatge del nou termòstat
- Install the new wall plate provided with your Hunter 44760 thermostat. Secure it to the wall using the included screws.
- Connect the labeled wires to the corresponding terminals on the new wall plate. Refer to the wiring diagram in the full manual for specific connections.
- Introduïu 2 piles AAA (no incloses) al compartiment de les piles.
- Attach the thermostat cover to the wall plate, ensuring it clicks securely into place.
- Restore power to your heating and cooling system at the circuit breaker.
3. Funcionament
This section details how to operate your Hunter 44760 thermostat, including basic controls and programming features.
3.1 Mostra finalview
The thermostat features an INDIGLO backlit display that shows the current temperature, set temperature, time, and system status. The display is designed for clear readability.
Image: Hunter 44760 Thermostat packaging showing the thermostat's front panel with its digital display (showing 10:09 and 73 degrees) and various control buttons below it.
3.2 Controls bàsics
- Temperature UP/DOWN Buttons: Use these buttons to adjust the desired temperature setting.
- Interruptor del ventilador:
- AUTOMÀTIC: The fan runs only when the heating or cooling system is operating.
- ACTIVITAT: El ventilador funciona contínuament, independentment de si el sistema de calefacció o de refrigeració està actiu.
- Interruptor del sistema:
- CALOR: El termòstat controla el sistema de calefacció.
- GUAI: El termòstat controla el sistema de refrigeració.
- DESACTIVAT: Els sistemes de calefacció i refrigeració estan apagats.
3.3 Programming Features
The Hunter 44760 offers advanced programming options for energy efficiency and comfort.
- Auto Season Changeover: This feature automatically switches between heating and cooling modes as needed, eliminating the need for manual adjustment.
- Home Today & Vacation Overrides: Use these functions for temporary temperature adjustments or to set an extended hold for vacation periods.
- Energy Monitor: Accediu a aquesta funció view the run time of your heating and cooling system, helping you understand and manage energy usage.
- Indicador de canvi de filtre: A reminder will appear on the display when it's time to check or replace your system's air filter.
- Recuperació automàtica: This intelligent feature ensures your home reaches the desired temperature by the start of a programmed period, optimizing system operation.
- Permanent and Vacation Hold: These settings allow you to maintain a specific temperature indefinitely or for a set vacation duration, overriding the regular program.
- Returns to Programmed Settings: The thermostat can easily revert to your pre-programmed schedule.
4. Manteniment
Un manteniment adequat garanteix la longevitat i el rendiment òptim del termòstat.
4.1 Substitució de la bateria
The thermostat requires two AAA batteries (not included) for operation and to maintain settings during power outages. A low battery warning will appear on the display when replacement is needed.
- Gently pull the thermostat body away from the wall plate to access the battery compartment.
- Remove the old batteries and insert two new AAA alkaline batteries, ensuring correct polarity (+/-).
- Reattach the thermostat body to the wall plate.
4.2 Neteja
Netegeu l'exterior del termòstat amb un drap suau iamp drap. No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar l'acabat o els components interns.
5. Solució De Problemes
If you encounter issues with your thermostat, refer to the following common problems and solutions.
- La pantalla del termòstat està en blanc:
- Check if the power to your HVAC system is on at the circuit breaker.
- Replace the AAA batteries in the thermostat.
- El sistema no respon (no hi ha calefacció/refrigeració):
- Ensure the system switch is set to HEAT or COOL, not OFF.
- Verify the fan switch is set to AUTO or ON.
- Check if the set temperature is above (for heat) or below (for cool) the current room temperature.
- Confirmeu que totes les connexions de cablejat siguin segures.
- Lectura de temperatura incorrecta:
- Assegureu-vos que el termòstat no estigui exposat a la llum solar directa, corrents d'aire ni fonts de calor.
- Allow time for the thermostat to acclimate to the room temperature after installation.
- Filter Change Indicator Remains On:
- Replace your system's air filter.
- Reset the filter change indicator through the thermostat's settings menu (refer to the full manual for specific steps).
6. Especificacions
Below are the technical specifications for the Hunter 44760 Multi-Stage Heat Pump Thermostat.
| Característica | Especificació |
|---|---|
| Marca | Caçador |
| Número de model | 44760 |
| Voltage | 24 Volts |
| Color | Blanc |
| Característiques especials | Low Battery Indicator, INDIGLO Backlight, Energy Star Compliant |
| Dimensions del producte | 2 x 7 x 5 polzades |
| Pes de l'article | 1.1 lliures |
| Piles necessàries | 2 piles AAA (no incloses) |
| Tipus de control | Control de botons |
7. Informació de la garantia
The Hunter 44760 Multi-Stage Heat Pump Thermostat comes with a Garantia limitada d'un any from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full details regarding warranty terms and conditions, refer to the documentation included with your product or contact Hunter Fan Company customer support.
8. Atenció al client
If you have any questions, require technical assistance, or need further support regarding your Hunter 44760 thermostat, please contact the Hunter Fan Company customer service. Contact information can typically be found on the manufacturer's weblloc web o a l'embalatge original del producte.
