Producte acabatview
The Tamiya TS-40 Metallic Black Spray Lacquer is a high-quality synthetic lacquer paint designed for model building and hobby applications. This 100ml spray can provides excellent coverage and a durable finish, ideal for painting large surfaces such as 1/24 scale car bodies.
Tamiya spray paints are formulated to be compatible with acrylic and enamel paints, allowing for detailed work and layering after the base coat has cured. This versatility simplifies the decoration process for plastic models.
Image 1: Tamiya TS-40 Metallic Black Spray Lacquer can.
Característiques principals:
- TS-40 Metallic Black finish.
- Contains 100ml of synthetic lacquer paint.
- Cures in a short period of time.
- Ideal for preparing ABS and Styrene plastic for paint.
- Can also be used on metal parts.
- Compatible with acrylic and enamel paints for detailing.
Precaucions de seguretat
WARNING: Highly Flammable, Pressurized Container. Read all warnings on the can before use.
- Protecció ocular: Always wear safety glasses or goggles to protect eyes from paint mist and fumes.
- Lung Protection: Use in a well-ventilated area. Wear a respirator or mask designed for paint fumes to prevent inhalation.
- Protecció de la pell: Wear gloves and long sleeves to prevent skin contact. Wash hands thoroughly after handling.
- Inflamabilitat: Mantenir allunyat de la calor, superfícies calentes, espurnes, flames obertes i altres fonts d'ignició. No fumar.
- Contenidor pressuritzat: Do not pierce or burn, even after use. Do not expose to temperatures exceeding 50°C (122°F).
- Nens: Mantenir fora de l'abast dels nens.
- Eliminació: Eliminar el contingut/envàs d'acord amb la normativa local.
Muntatge i preparació
Proper preparation is crucial for achieving the best results with Tamiya spray lacquer. Ensure your workspace and the item to be painted are ready before beginning.
1. Preparació de l'espai de treball:
- Select a well-ventilated area, preferably outdoors or in a spray booth with adequate air circulation.
- Protect surrounding areas from overspray using drop cloths or newspaper.
- Ensure the temperature is between 20-25°C (68-77°F) and humidity is low for optimal drying.
2. Preparació de la superfície:
- Clean the surface of the model or object thoroughly to remove any dust, grease, or fingerprints. Use a mild detergent and water, then rinse and allow to dry completely.
- For plastic models, ensure the plastic is free of mold release agents. Lightly sand smooth surfaces with fine-grit sandpaper (e.g., 800-1000 grit) to provide adhesion, then clean again.
- If necessary, apply a primer suitable for the material (plastic or metal) to enhance adhesion and provide a uniform base color.
Instruccions d'ús: Aplicació
Follow these steps for effective application of Tamiya TS-40 Metallic Black Spray Lacquer.
1. Shaking the Can:
- Shake the spray can vigorously for at least one minute after hearing the mixing ball rattle. Continue shaking periodically during application to ensure consistent paint mixture and metallic flake distribution.
2. Test Spray:
- Before applying to your model, perform a test spray on a piece of scrap material (e.g., cardboard or spare plastic) to check the spray pattern and color consistency.
Image 2: Proper grip and distance for spraying.
3. Application Technique:
- Hold the can approximately 20-30 cm (8-12 inches) from the surface of the object.
- Apply paint in thin, even coats using a smooth, sweeping motion. Start spraying off the object and move across, releasing the nozzle at the end of the pass.
- Avoid applying thick coats, as this can lead to runs, drips, or an uneven finish. Multiple thin coats are always better than one thick coat.
- Allow each coat to dry to the touch (typically 10-15 minutes) before applying the next. For best results, allow 30 minutes to an hour between coats.
- For a deeper, richer metallic effect, apply 2-3 light coats.
4. Curing Time:
- The paint will be dry to the touch in a short period. However, allow at least 24 hours for the paint to fully cure before handling extensively or applying additional paint types (e.g., acrylics or enamels for detailing). Full hardness may take several days.
Manteniment i emmagatzematge
Proper care and storage will extend the life of your Tamiya spray paint and ensure consistent performance.
1. Després de l'ús:
- To prevent the nozzle from clogging, invert the can and spray for a few seconds until only clear propellant comes out. This clears paint from the nozzle.
- Wipe the nozzle clean with a cloth if any paint remains.
2. Emmagatzematge:
- Store the can in a cool, dry place, away from direct sunlight and sources of heat or ignition.
- Ensure the cap is securely placed on the can to prevent accidental discharge or drying of the nozzle.
- Do not store in temperatures exceeding 50°C (122°F).
Resolució de problemes comuns
Here are some solutions to common problems encountered during spray painting.
| Problema | Causa possible | Solució |
|---|---|---|
| Uneven Spray / Splattering | Insufficient shaking; nozzle clogged; can too cold; holding can too far. | Shake vigorously; clear or replace nozzle; warm can gently in warm water (do not heat directly); hold closer (20-30cm). |
| Runs or Drips | Applying paint too thickly; holding can too close; moving too slowly. | Apply thinner coats; increase distance; move can at a consistent, faster pace. |
| Poor Adhesion / Peeling | Surface not clean; surface too smooth; incompatible primer. | Clean and degrease surface thoroughly; lightly sand smooth surfaces; use appropriate primer. |
| Dull Finish / Lack of Metallic Effect | Insufficient shaking; too few coats; improper drying conditions. | Shake well before and during use; apply 2-3 light coats; ensure proper ventilation and temperature during drying. |
Especificacions del producte
Detailed technical specifications for the Tamiya TS-40 Metallic Black Spray Lacquer.
Image 3: Representative color swatch for TS-40 Metallic Black.
| Atribut | Detall |
|---|---|
| Marca | TAMIYA |
| Nom del model | TS-40 (TAM85040 / 85040-A00) |
| Color | Negre metàl·lic |
| Tipus d'acabat | Metàl·lic |
| Volum de l'article | 100 mil·lilitres (3.38 unces líquides) |
| Tipus de pintura | Synthetic Lacquer (Compatible with Acrylic, Enamel) |
| Recomanació de superfície | Metal, Plastic (ABS, Styrene) |
| Dry Time (to touch) | Short period (approx. 10-15 minutes) |
| Temps de curació completa | Approx. 3 hours (for light handling), several days for full hardness. |
| Dimensions del producte | 2.05 x 2.05 x 4.21 polzades |
| Pes de l'article | 3.52 unces |
| UPC | 885366155423 |
Garantia i Suport
Tamiya products are known for their quality and reliability. For specific warranty information regarding your Tamiya TS-40 Metallic Black Spray Lacquer, please refer to the packaging or contact Tamiya customer support directly.
Atenció al client:
If you have questions about product usage, safety, or require technical assistance, please visit the official Tamiya website or contact their customer service department. Contact details are typically available on the product packaging or their official weblloc.
Note: As this is a consumable product, warranty terms typically cover manufacturing defects rather than issues arising from improper use or storage.
