Arnold OEM-784-5580 Snow Thrower Slide Shoes Instruction Manual

1. Producte acabatview

The Arnold OEM-784-5580 Snow Thrower Slide Shoes are designed as replacement parts for MTD two-stage snow throwers manufactured from 1992 onwards. These slide shoes protect the auger housing from wear and tear during operation, ensuring efficient snow removal and extending the life of your snow thrower.

Each package contains two (2) black alloy steel slide shoes, model OEM-784-5580.

2. Informació de seguretat

Always prioritize safety when working with power equipment and replacement parts. Read and understand your snow thrower's original operating manual before attempting any installation or maintenance.

• Desconnecteu l'alimentació: Ensure the snow thrower's engine is off and the spark plug wire is disconnected before beginning any work.
• Utilitzeu equip de protecció: Utilitzeu l'equip de protecció individual adequat, incloent-hi guants i protecció ocular.
• Àrea de treball estable: Work on a flat, stable surface to prevent the snow thrower from moving unexpectedly.
• Eines adequades: Use the correct tools for the job to avoid damage to parts or injury.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents i no estiguin danyats en obrir el paquet.

• Two (2) Arnold OEM-784-5580 Snow Thrower Slide Shoes (Black, Alloy Steel)

Image 1: Two Arnold OEM-784-5580 Snow Thrower Slide Shoes. These are the replacement parts included in the package.

4. Compatibilitat

These slide shoes are designed to fit MTD two-stage snow throwers manufactured from 1992 and later. They are also compatible with various other brands within the MTD family, including Troy-Bilt, Yard-Man, Arnold, Remington, Yard Machines, Columbia, Murray, and Robomow.

The universal design fits machines with 2-3/4 inch and 3 inch bolt centers. Please refer to your snow thrower's manual for specific part numbers and compatibility verification.

Image 2: The product packaging highlights that the package includes two skid shoes and features a universal design compatible with many snow thrower brands.

5. Instal·lació (Configuració)

Follow these steps to replace the snow thrower slide shoes. Always refer to your snow thrower's specific service manual for detailed instructions.

1. Prepare the Snow Thrower: Turn off the engine, disconnect the spark plug wire, and ensure the machine is stable. Tilt the snow thrower back so the auger housing is accessible.
2. Remove Old Slide Shoes: Locate the existing slide shoes on the sides of the auger housing. They are typically secured with bolts and nuts. Use a wrench to loosen and remove the nuts, then remove the old slide shoes. Note the orientation of the old shoes for correct installation of the new ones.
3. Neteja l'àrea de muntatge: Clean any debris, rust, or ice from the mounting area on the auger housing.
4. Install New Slide Shoes: Position a new slide shoe against the auger housing, aligning the bolt holes. Insert new carriage bolts (not included with this product) through the holes from the inside of the auger housing, then secure with nuts on the outside. Do not overtighten initially.
5. Ajusta l'alçada: The slide shoes are adjustable to different clearing depths. Adjust both slide shoes to the desired height. For most operations, the shoes should be set to allow the scraper blade to clear snow without digging into the surface. Tighten all nuts securely once the desired height is achieved.
6. Comprovació final: Ensure both slide shoes are securely fastened and set to the same height. Reconnect the spark plug wire.

Image 3: An installed slide shoe on a snow thrower, demonstrating its position and adjustable bolt centers for different clearing depths. Attachment hardware is not included.

6. Consideracions operatives

Properly installed slide shoes prevent the auger and auger housing from making direct contact with the ground, which can cause damage and premature wear. Adjust the slide shoes to suit the terrain and snow conditions:

• Paved Surfaces: Set the slide shoes to allow the scraper blade to ride just above the surface, ensuring a clean sweep without scraping the pavement.
• Gravel or Uneven Surfaces: Set the slide shoes higher to prevent the auger from picking up gravel or debris, which could damage the snow thrower or be thrown at high speed.

7. Manteniment

Regular inspection and maintenance of your slide shoes are crucial for optimal snow thrower performance and longevity.

• Inspeccionar regularment: Before each use, check the slide shoes for wear, bending, or damage. Replace them if they are significantly worn down or damaged.
• Neteja després de l'ús: Remove any snow, ice, or debris from the slide shoes and mounting area after each use to prevent corrosion and ensure proper function.
• Comprovació dels elements de fixació: Periodically check that the bolts and nuts securing the slide shoes are tight. Loose fasteners can lead to premature wear or loss of the shoes.

8. Solució De Problemes

If you encounter issues related to the slide shoes, consider the following:

• Desgast excessiu: If slide shoes wear out quickly, check if they are set too low for the operating surface or if the snow thrower is being operated on abrasive surfaces frequently.
• Clarificació desigual: Ensure both slide shoes are adjusted to the same height. Uneven settings can cause the snow thrower to clear snow unevenly.
• Loose Shoes: If shoes become loose, tighten the mounting bolts and nuts. Consider using thread locker for added security if loosening persists.

9. Especificacions

10. Garantia i Suport

This product is a genuine MTD replacement part. For warranty information or technical support, please refer to the documentation provided with your original snow thrower or contact MTD customer service directly. MTD products are supported by a robust network of sales, service, and support.

For further assistance, visit the official Arnold or MTD websites, or contact an authorized service dealer.