Manual d'usuari del kit de commutador de pressió Fantech DB 10

1. Introducció

The Fantech DB 10 Pressure Switch Kit is a pressure-activated control device designed to automate the operation of various systems, such as dryer booster fans or ventilation systems. It features an integral delay function, ensuring stable and reliable performance by preventing rapid cycling. This manual provides essential information for the safe and effective installation, operation, and maintenance of your DB 10 Pressure Switch Kit.

2. Informació de seguretat

ADVERTIMENT: Installation and servicing of this product should only be performed by qualified personnel. Disconnect power before installing or servicing the unit to prevent electric shock or equipment damage. All wiring must comply with local and national electrical codes.

• Utilitzeu sempre l'equip de protecció individual (EPI) adequat durant la instal·lació.
• Assegureu-vos que la font d'alimentació coincideixi amb el voltage requirements of the switch (115-120 Volts).
• Do not exceed the specified current rating of the switch.
• Mantingueu totes les connexions elèctriques seques i segures.

3. Què hi ha a la caixa

The Fantech DB 10 Pressure Switch Kit includes the following components:

• 1 x DB 10 Pressure Switch with Integral Delay
• 1 x Section of NPT Tubing (approximately 3 feet)
• 1 x Grommet for Tubing
• 4 x Wire Nuts for Electrical Connection
• 1 x Packet with Switch Mounting Hardware (screws and wall anchors)

4. Instal·lació

Follow these steps for proper installation of the DB 10 Pressure Switch:

1. Trieu la ubicació de muntatge: Select a location for the pressure switch that is easily accessible and close to the ductwork or system it will monitor. The switch should be mounted vertically with the pressure port facing upwards or horizontally.
2. Muntar l'interruptor: Use the provided mounting hardware to securely attach the pressure switch to a stable surface.
3. Prepare Duct Connection: Drill a small hole (typically 1/4 inch) into the ductwork where pressure changes are most significant. For applications like dryer booster fans, it is often recommended to drill the hole just before an elbow or a backdraft damper to ensure sufficient pressure buildup for reliable activation.
4. Connexió de tubs: Insert one end of the NPT tubing into the pressure port on the switch. Secure the other end of the tubing into the drilled hole in the ductwork using the provided grommet to create an airtight seal. Ensure the tubing is not kinked or obstructed.
5. Cablejat elèctric: The DB 10 switch is designed for 115-120 Volt AC supply. It features a Normally Closed (NC) contact type. Connect the electrical wires using the provided wire nuts according to the wiring diagram specific to your application. Ensure all connections are tight and insulated. Consult a qualified electrician if you are unsure about the wiring process.
6. Verifica les connexions: Double-check all mechanical and electrical connections before restoring power.

5. Funcionament

The Fantech DB 10 Pressure Switch operates automatically based on pressure differentials. When the system it monitors (e.g., a dryer or ventilation fan) begins operation, it creates a pressure change within the ductwork. Once this pressure change reaches the switch's activation threshold, the switch will close its contacts, thereby activating the connected device (e.g., a booster fan). The integral delay function ensures that the switch does not react to momentary pressure fluctuations, providing stable and consistent operation. When the system stops, the pressure drops, and after a short delay, the switch will open its contacts, deactivating the connected device.

6. Manteniment

The DB 10 Pressure Switch is designed for minimal maintenance. However, periodic checks can ensure its longevity and reliable performance:

• Inspeccionar tubs: Periodically check the NPT tubing for any kinks, cracks, or blockages that could affect pressure sensing. Ensure it remains securely connected to both the switch and the duct.
• Comproveu les connexions elèctriques: Ensure all wire nuts and electrical connections remain tight and free from corrosion.
• Exterior net: Keep the exterior of the switch clean and free from dust or debris. Do not use harsh chemicals.
• Verificar el funcionament: Occasionally verify that the switch activates and deactivates as expected with the operation of the connected system.

7. Solució De Problemes

If you encounter issues with your DB 10 Pressure Switch, consider the following:

• Device Not Activating:
  • Assegureu-vos que l'alimentació de l'interruptor estigui activa.
  • Check the NPT tubing for blockages, kinks, or leaks.
  • Verify that sufficient pressure is being generated in the ductwork. The pressure sensing hole should ideally be located where pressure builds up, such as before an elbow or dampeh.
  • Inspect electrical connections for looseness or damage.
• Device Not Deactivating:
  • Ensure the pressure in the ductwork has returned to normal (i.e., the system it monitors is off).
  • Check the NPT tubing for any persistent blockages or foreign objects that might be maintaining pressure.
  • If the issue persists, the switch itself may be faulty and require replacement.
• Funcionament intermitent:
  • Comproveu si hi ha connexions elèctriques soltes.
  • Ensure the pressure signal is consistent and not fluctuating rapidly.

For issues not resolved by these steps, contact Fantech customer support.

8. Especificacions

9. Garantia i Suport

Fantech products are manufactured to high standards and are typically covered by a manufacturer's warranty. Please refer to the warranty documentation included with your purchase or visit the official Fantech website for detailed warranty terms and conditions. For technical support, replacement parts, or further assistance, please contact Fantech customer service directly through their official website or contact information provided with your product.

You can visit the Fantech store for more information: Botiga FANTECH a Amazon