1. Producte acabatview
The Schlage SP455A3 Kick Down Door Holder is designed to provide a simple and effective method for holding doors open. Constructed from cast aluminum with a bright brass finish, it features a 4-inch arm and a durable rubber foot for secure engagement with the floor surface. This unit is activated and released with a touch of the foot, offering convenient operation.
Figure 1: Schlage SP455A3 Kick Down Door Holder. This image displays the door holder with its 4-inch arm and rubber foot, presented in a bright brass finish.
Característiques principals:
- Operació senzilla: Engage and release the door holder with a foot.
- Construcció duradora: Made from cast aluminum for longevity.
- Subjecció segura: Features a rubber bottom to prevent slipping.
- Optimal Clearance: Designed for doors with a door-to-floor clearance of 2 inches or less.
- Acabat: Bright Brass.
2. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació.
- Schlage SP455A3 Kick Down Door Holder (1 unit)
- Maquinari de muntatge (cargols)
3. Instruccions d'instal·lació
This door holder is designed for door mount installation. Ensure the door-to-floor clearance is 2 inches or less for proper function.
Eines necessàries:
- Llapis
- Cinta mètrica
- Drill with appropriate drill bit (for pilot holes)
- Tornavís (es recomana el de capçal Phillips)
Passos d'instal·lació:
- Determineu la ubicació de muntatge: Position the door holder on the lower edge of the door, ensuring it is within reach for foot operation and that the rubber foot will make firm contact with the floor when engaged. The ideal location allows the door to open to the desired angle.
- Comprovar la liquidació: With the door holder temporarily held in place, ensure that the distance from the bottom of the door to the floor is 2 inches or less. This ensures the rubber foot can effectively engage the floor.
- Marqueu els forats dels cargols: Using a pencil, mark the locations for the mounting screws through the pre-drilled holes on the door holder base.
- Perforar forats pilot: Carefully drill pilot holes at the marked locations. Use a drill bit slightly smaller than the screw diameter to prevent wood splitting.
- Attach Door Holder: Align the door holder with the pilot holes and secure it firmly to the door using the provided mounting screws and a screwdriver. Do not overtighten.
- Prova de funcionament: Once installed, test the door holder by pushing down on the arm with your foot to engage it and lifting it to release.
4. Instruccions de funcionament
The Schlage SP455A3 Kick Down Door Holder is designed for simple, foot-activated use.
- Per participar: With your foot, gently press down on the top of the door holder's arm until the rubber foot makes firm contact with the floor and the door is held in place.
- Per alliberar: With your foot, gently lift the arm of the door holder upwards. The rubber foot will disengage from the floor, allowing the door to move freely.
5. Manteniment
Regular maintenance ensures optimal performance and extends the life of your door holder.
- Neteja: Wipe the metal components with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners that may damage the finish.
- Rubber Foot Inspection: Periodically check the rubber foot for wear or damage. A worn rubber foot may reduce the holder's ability to grip the floor. Replacement rubber tips may be available from the manufacturer.
- Apretar els cargols: If the door holder becomes loose, gently tighten the mounting screws. Do not overtighten.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Door holder does not hold the door securely. |
|
|
| Door holder feels loose on the door. | Els cargols de muntatge estan solts. | Tighten mounting screws with a screwdriver. |
7. Especificacions
| Atribut | Detall |
|---|---|
| Marca | ESCHAGE |
| Número de model | 455A3 |
| Tipus de muntatge | Muntatge de la porta |
| Material | Aluminum, Brass, Rubber |
| Color/Acabat | Llautó brillant |
| Arm Length / Size | 4 inches (4 in H) |
| Door-to-Floor Clearance | 2 polzades o menys |
| Pes de l'article | 2.4 unces |
| Dimensions del producte | 9.43 x 4.26 x 5.95 polzades |
| Components inclosos | Door holder, Mounting Hardware |
| Piles necessàries | No |
8. Garantia i Suport
For specific warranty information, please refer to the documentation included with your product or visit the official SCHLAGE website. SCHLAGE products are backed by a commitment to quality and durability.
If you require technical assistance or have questions regarding your Schlage SP455A3 Kick Down Door Holder, please contact SCHLAGE customer support. Contact details are typically available on the manufacturer's weblloc o embalatge del producte.
