Manual d'instruccions del joc de pastilles de fre de disc ceràmiques Wagner QS ZD465A

1. Producte acabatview

The Wagner QS ZD465A ceramic brake pads are engineered for consistent and reliable stopping power, designed to meet the performance standards for everyday vehicle use. These front brake pads ensure smooth friction application, contributing to balanced braking performance.

Característiques clau

• Vibració reduïda: Application-specific friction material and chamfered edges help minimize brake noise and vibration.
• OE-Style Formulation: Designed to match original equipment specifications for balanced braking.
• Integrally Molded: Enhances structural integrity for uniform contact across the rotor surface.
• Engineered for Street Use: Formulated for consistent braking performance in daily driving conditions.
• Garantia de qualitat: Designed, tested, and certified in the USA by Federal-Mogul engineers.
• Even Friction Performance: 100 percent OE post-curing process ensures consistent friction throughout the pad's life.
• Reducció de soroll: Application-specific shims are included to reduce noise-causing vibration.
• Asbestos-Free: Manufactured with asbestos-free materials.

Compatibilitat de vehicles

This brake pad set is compatible with the front axles of the following vehicles:

• 2005 Acura EL
• 1996–2011 Honda Civic
• 2010–2014 Honda Insight

This image displays the complete Wagner QS ZD465A ceramic disc brake pad set, including four brake pads and associated hardware clips, ready for installation.

A detailed diagram highlighting the application-specific chamfers, shims, and slots designed to reduce noise and vibration. It also shows the gradual post-cured process for even friction performance and premium stainless-steel hardware included for select applications.

2. Guia d'instal·lació

Brake system installation requires specialized tools and knowledge. It is highly recommended that installation be performed by a qualified automotive technician. Improper installation can lead to brake failure and serious injury.

General Installation Steps (Consult a professional service manual for your specific vehicle):

1. Safely lift and support the vehicle, then remove the wheels.
2. Remove the brake caliper and old brake pads. Inspect the brake rotor for wear, damage, or warping. Replace rotors if necessary.
3. Clean the caliper and caliper bracket thoroughly. Apply brake lubricant to caliper slide pins and contact points as recommended by your vehicle's service manual.
4. Install the new Wagner QS ZD465A brake pads and hardware clips. Ensure proper fitment and orientation.
5. Reinstall the brake caliper and secure all bolts to the manufacturer's specified torque.
6. Repeat the process for all wheels requiring new brake pads.
7. Pump the brake pedal several times to ensure the caliper pistons are seated against the new pads.
8. Check the brake fluid level and top off if necessary.
9. Perform the brake break-in procedure as outlined in Section 3.

3. Break-in Procedure

Proper break-in (also known as bedding-in) of new brake pads is crucial for optimal performance, longevity, and to prevent noise. This process transfers a thin, even layer of friction material from the pads to the rotors.

Recommended Break-in Steps:

1. Find a safe, open area with minimal traffic.
2. Accelerate to approximately 35 MPH (56 km/h).
3. Apply moderate brake pressure to slow down to about 5 MPH (8 km/h). Do not come to a complete stop.
4. Release the brakes and accelerate back to 35 MPH.
5. Repeat steps 3-4 for 5-6 consecutive times.
6. After the last stop, drive for several minutes at a moderate speed without applying the brakes to allow the system to cool down. Avoid heavy braking during this cooling period.
7. Allow the brakes to cool completely before normal driving. This may take an hour or more depending on ambient temperature and driving conditions.

During the break-in process, you may notice some smoke or a burning smell. This is normal and indicates the resins in the pads are curing. Avoid hard braking or prolonged braking immediately after installation until the break-in procedure is complete.

4. Manteniment

Regular maintenance of your vehicle's braking system is essential for safety and performance. Follow your vehicle manufacturer's recommended service intervals.

Consells generals de manteniment:

• Inspecció periòdica: Have your brake pads, rotors, and calipers inspected during routine vehicle service. Check for uneven wear, cracks, or damage.
• Brake Fluid Check: Ensure brake fluid levels are within the recommended range and that the fluid is clean. Contaminated or low fluid can affect braking performance.
• Listen for Warning Signs: Pay attention to any unusual noises (squealing, grinding) or changes in brake pedal feel (spongy, hard). These can indicate issues requiring immediate attention.
• Neteja: Keep wheels and brake components free of excessive dirt and debris.

5. Solució De Problemes

If you experience any issues with your braking system after installing Wagner QS ZD465A brake pads, consult the following common troubleshooting points. For persistent or severe issues, seek professional automotive service.

Problemes comuns i solucions:

• Soroll de frenada (grinyol/grinyol):
  • Ensure proper break-in procedure was followed.
  • Verify that all hardware was installed correctly and lubricated where necessary.
  • Check for foreign objects or debris between the pad and rotor.
  • Inspect rotors for uneven wear or scoring.
• Rendiment de frenada reduït:
  • Confirm proper break-in.
  • Comproveu el nivell i l'estat del líquid de frens.
  • Inspect for air in the brake lines (may require bleeding).
  • Assegureu-vos que els calibradors funcionin correctament i que no estiguin bloquejats.
• Vibration or Pulsation During Braking:
  • This often indicates warped rotors. Inspect rotors for runout.
  • Comproveu si hi ha rodaments de rodes o components de suspensió solts.

6. Especificacions

7. Garantia i Suport

For specific warranty information regarding your Wagner QS ZD465A Disc Brake Pad Set, please refer to the documentation included with your product or visit the official Wagner website. For technical support or further assistance, contact Wagner customer service directly.