Howard Miller Arendal Grandfather Clock Instruction Manual

Introducció

Thank you for choosing the Howard Miller Arendal Grandfather Clock, Model 611005. This manual provides essential information for the proper setup, operation, maintenance, and care of your new timepiece. Designed with traditional craftsmanship and a cable-driven German movement, your clock is built to provide accurate timekeeping and a beautiful Westminster chime for generations.

Please read these instructions carefully before attempting to set up or operate your clock. Retain this manual for future reference.

Figura 1: Frontal view of the Howard Miller Arendal Grandfather Clock. This elegant timepiece features a rich wood finish, a convex glass crystal, and a visible pendulum and weights.

Informació de seguretat

Observe the following safety precautions to prevent injury or damage to your clock:

• Col·locació estable: Ensure the clock is placed on a level, stable surface to prevent tipping. Use the adjustable levelers provided.
• Eviteu les obstruccions: Do not place the clock where the pendulum or weights could be obstructed or struck.
• Nens i animals de companyia: Keep children and pets away from the clock, especially during winding or when the access doors are open.
• Parts mòbils: Avoid touching internal moving parts while the clock is operating.
• Seguretat elèctrica: If your clock has an electric light or automatic nighttime shut-off feature, ensure it is properly connected to a suitable power source. Do not expose electrical components to moisture.
• Objecte pesat: The clock is heavy. Exercise caution when moving it. It is recommended to have at least two people for relocation.

Desembalatge i configuració

1. Desembalatge

1. Carefully remove the clock from its packaging. Retain all packing materials for future transport or service.
2. Open the front door of the clock. Remove any protective foam or cardboard inserts from inside the cabinet.
3. Locate the pendulum and weights, which are typically packed separately within the carton or secured inside the clock.

2. Col·locació i anivellament

Choose a location for your clock that is away from direct sunlight, heat sources, and areas of high humidity. Ensure the floor is sturdy enough to support the clock's weight.

• Position the clock in its desired location.
• Use a spirit level to check if the clock is perfectly level from side to side and front to back.
• Adjust the levelers located at the bottom corners of the clock until it is stable and level. This is crucial for accurate timekeeping and proper pendulum swing.

Figure 2: The Arendal Grandfather Clock positioned in a room, highlighting its impressive vertical presence and elegant design.

3. Installing Pendulum and Weights

1. Carefully hang the pendulum on the pendulum hanger, which is a small hook or pin located at the back of the movement. Ensure it swings freely.
2. Attach the three weights to their respective chains or cables. The weights are typically marked (e.g., L, C, R for Left, Center, Right) or have different appearances. Ensure they are hung correctly. The heaviest weight usually goes on the right (chime side), the second heaviest on the left (strike side), and the lightest in the center (timekeeping side). Refer to specific markings if present.

Figura 3: Detall view of the pendulum and three brass weights, essential components for the clock's mechanical operation.

Instruccions de funcionament

1. Winding the Clock

Your Arendal Grandfather Clock features a cable-driven movement. It must be wound weekly to maintain operation. To wind the clock:

• Insert the winding crank into the holes on the dial face, corresponding to each weight.
• Turn the crank clockwise until each weight is fully raised (just below the dial). Do not overwind.
• The weights will slowly descend as the clock runs, indicating the need for winding.

2. Configuració de l'hora

Per establir l'hora correcta:

• Move only the minute hand (the longer hand) clockwise or counter-clockwise to the correct time.
• If moving the minute hand clockwise, pause at each quarter hour to allow the chime to complete before moving to the next quarter hour.
• Do not touch the hour hand directly; it will adjust automatically.

Figure 4: The clock's dial, featuring distinctive Roman numerals and elegant black serpentine hands, with a separate seconds track.

3. Starting the Pendulum

Once the weights are hung and the time is set:

• Reach through the front door and gently push the pendulum to one side and release it.
• Listen for an even "tick-tock" sound. If the sound is uneven, the clock may not be perfectly level. Re-adjust the levelers until an even beat is achieved.

4. Chime Settings

Your clock features a Westminster chime and an automatic nighttime chime shut-off.

• Selecció de timbres: A lever on the side of the dial (or inside the door) allows you to select the chime melody or silence the chime. Refer to the specific markings on your clock for options.
• Nighttime Shut-off: The automatic nighttime chime shut-off feature silences the chime between approximately 10:00 PM and 7:00 AM. This feature is typically engaged via a switch or lever.

Manteniment

Proper maintenance ensures the longevity and performance of your Howard Miller Grandfather Clock.

• Neteja de l'armari: Dust the wood cabinet regularly with a soft, dry cloth. For deeper cleaning, use a high-quality furniture polish sparingly, following the product instructions. Avoid abrasive cleaners.
• Cleaning the Dial and Glass: Use a soft, lint-free cloth to gently wipe the dial and glass. For glass, a mild glass cleaner can be applied to the cloth (not directly to the glass) to avoid contact with the dial or wood finish.
• Movement Lubrication: The clock's mechanical movement requires professional lubrication every 3-5 years. Do not attempt to lubricate the movement yourself, as this can cause damage. Contact a qualified clock repair technician.
• Chain/Cable Inspection: Periodically inspect the chains or cables for any signs of wear or fraying. If any damage is observed, contact a service professional immediately.

Resolució de problemes

Aquí teniu solucions a problemes comuns que podeu trobar:

For issues not covered here, please contact Howard Miller Customer Support.

Especificacions

Manufacturing Process Overview

The Howard Miller Arendal Grandfather Clock is crafted with meticulous attention to detail. The manufacturing process involves several stages, from selecting high-quality lumber to the final assembly and inspection of the intricate German movement.

Informació de la garantia

Your Howard Miller Arendal Grandfather Clock is covered by a Garantia limitada o completa. For specific details regarding the terms, conditions, and duration of your warranty, please refer to the warranty card included with your purchase or visit the official Howard Miller weblloc web. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.

Atenció al client

Should you require assistance with your Howard Miller Arendal Grandfather Clock, please contact Howard Miller Customer Support. You can find contact information on the official Howard Miller weblloc web o a través de l'enllaç d'atenció al client que us ha proporcionat el vostre venedor.

Per obtenir recursos addicionals i informació sobre el producte, podeu visitar la Howard Miller Store on Amazon.