Producte acabatview
The Performance Tool W1126C Socket is a 3/8-inch drive, 13/16-inch spark plug socket designed for efficient and secure spark plug removal and installation. It features a durable drop-forged steel construction and a rubber insert to firmly hold and protect spark plugs during use. The large size laser etching ensures easy identification of the socket size.
Image: The Performance Tool W1126C 13/16-inch spark plug socket, showcasing its chrome vanadium finish and size etching.
Muntatge i preparació
Before using the W1126C socket, ensure you have the appropriate 3/8-inch drive ratchet or extension bar. Verify that the spark plug size matches the 13/16-inch socket size to prevent damage to the spark plug or the socket.
- Inspeccioneu el sòcol: Check the socket for any signs of damage or wear. Ensure the internal rubber insert is securely in place.
- Seleccioneu l'eina d'accionament adequada: Attach the 3/8-inch drive end of the socket firmly to a compatible ratchet, breaker bar, or extension.
- Preparació del vehicle: For spark plug replacement, ensure the engine is cool to the touch. Disconnect the negative terminal of the vehicle's battery to prevent accidental electrical discharge.
Instruccions de funcionament
This socket is designed for the safe and effective removal and installation of spark plugs. The internal rubber insert provides a secure grip on the spark plug's ceramic insulator, preventing it from falling out of the socket during handling.
Image: The Performance Tool W1126C socket attached to a ratchet, being used to access a spark plug in an engine bay.
Spark Plug Removal:
- Access Spark Plug: Carefully remove the spark plug wire or coil pack from the spark plug. Clear any debris from around the spark plug well.
- Engage Socket: Place the W1126C socket over the spark plug, ensuring it seats fully and securely. The rubber insert will grip the spark plug.
- Loosen Spark Plug: Using your ratchet, slowly turn the socket counter-clockwise to loosen the spark plug. Apply steady, even pressure. If the plug is seized, apply penetrating oil and allow it to soak before attempting removal again.
- Extract Spark Plug: Once loosened, continue to unscrew the spark plug. The rubber insert will hold the plug in the socket, allowing for easy extraction from deep wells.
Instal·lació de la bugia:
- Prepare New Spark Plug: Apply a small amount of anti-seize compound to the threads of the new spark plug (if recommended by the vehicle manufacturer).
- Inseriu al sòcol: Gently push the new spark plug into the W1126C socket. The rubber insert will hold it in place.
- Start Threads: Carefully lower the socket with the spark plug into the spark plug well. Hand-tighten the spark plug clockwise until the threads engage. This helps prevent cross-threading.
- Torque Spark Plug: Once hand-tight, use a torque wrench with the W1126C socket to tighten the spark plug to the vehicle manufacturer's specified torque settings. Overtightening can damage the spark plug or cylinder head.
- Torneu a connectar: Reattach the spark plug wire or coil pack.
Manteniment
Proper maintenance will extend the life of your Performance Tool W1126C Socket.
- Neteja: After each use, wipe the socket clean with a dry cloth to remove any oil, grease, or debris. For stubborn grime, a mild degreaser can be used, followed by thorough drying.
- Emmagatzematge: Store the socket in a dry environment to prevent rust. A tool box or drawer is ideal.
- Inspecció: Periodically inspect the socket for any signs of wear, cracks, or damage. Pay close attention to the square drive opening and the internal rubber insert. Replace the socket if significant wear or damage is observed.
Resolució de problemes
Problemes comuns i les seves solucions:
| Problema | Causa possible | Solució |
|---|---|---|
| Spark plug not gripping in socket. | Rubber insert is worn, damaged, or dislodged. | Inspect the rubber insert. If dislodged, attempt to re-seat it. If worn or damaged, the socket may need replacement. |
| Socket slips on spark plug. | Incorrect socket size or worn spark plug hex. | Ensure the spark plug is 13/16-inch. If the plug's hex is rounded, specialized tools may be required for removal. |
| Socket stuck on drive tool. | Debris in square drive or tight fit. | Clean the square drive opening. Apply a small amount of lubricant if necessary. Use a gentle twisting motion to remove. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | W1126C |
| Mida de la unitat | 3/8 polzada |
| Mida del sòcol | 13/16-Inch (SP - Spark Plug) |
| Material | Drop Forged Alloy Steel |
| Tipus d'acabat | Unfinished (Chrome Vanadium) |
| Característica especial | Rubber Insert for Spark Plug Retention, Large Laser Etching |
| Pes de l'article | 3.2 unces |
| Dimensions del producte | 2.75 x 1.1 x 4.9 polzades |
| Fabricant | Wilmar, LLC |
| UPC | 039564112355 |
Informació de la garantia
The Performance Tool W1126C Socket is backed by a Garantia de per vida. This warranty covers defects in material and workmanship under normal use. For warranty claims or further details, please contact Performance Tool customer support or refer to the official product packaging.
Image: Product packaging for the Performance Tool W1126C Spark Plug Socket, clearly indicating "LIFETIME WARRANTY".
Atenció al client
For additional assistance, product inquiries, or support, please visit the official Performance Tool store or contact Wilmar, LLC, the manufacturer.
- Performance Tool Store: Visita la botiga
- Fabricant: Wilmar, LLC