Introducció
The Heath Zenith SL-6167-C is a wireless door chime kit designed for convenient installation and use. This kit includes a plug-in chime receiver and a battery-operated push button, offering a reliable transmission range of up to 100 feet. Users can select between an 8-note Westminster melody or a standard 2-note melody, with adjustable volume control to suit various preferences.
Informació de seguretat
- Llegiu atentament totes les instruccions abans de la instal·lació i el funcionament.
- Do not expose the chime receiver to moisture or extreme temperatures. For indoor use only.
- Ensure the push button is installed in a location protected from direct heavy rain to prolong its lifespan.
- Mantingueu les piles fora de l'abast dels nens. Desfeu-vos de les piles usades de manera responsable d'acord amb la normativa local.
- No intenteu obrir ni reparar les unitats vosaltres mateixos. Encarregueu tot el manteniment a personal qualificat.
Contingut del paquet
Verifiqueu que tots els components siguin presents al vostre paquet:
- 1 x Plug-in Chime Receiver
- 1 x Wireless Push Button (with 12V battery included)
- Mounting Hardware (screws, double-sided tape)
An image showing the white plug-in chime receiver on the left and two white wireless push buttons on the right. The chime receiver has horizontal speaker grilles at the top.
Configuració
1. Push Button Installation
- The wireless push button comes with a 12V battery pre-installed.
- Select a suitable mounting location near your door. Ensure the surface is clean and dry.
- Mount the push button using the provided screws or the double-sided adhesive tape. If using screws, pre-drill pilot holes if necessary.
2. Chime Receiver Setup
- Plug the chime receiver into any standard indoor 120V AC wall socket.
- For optimal signal reception, choose a central location within your home, away from large metal objects or other electronic devices that may cause interference.
3. Synchronization (Pairing)
The chime receiver and push button are typically pre-synchronized at the factory. To test, press the push button. If the chime sounds, the units are synchronized. If not, refer to the troubleshooting section for re-synchronization steps.
Instruccions de funcionament
Ajust de volum
Locate the volume control on the side or front of the chime receiver. Rotate or slide this control to increase or decrease the sound level to your desired volume.
Changing Chime Melody
The chime offers an 8-note Westminster melody and a 2-note melody. Refer to the chime unit for a dedicated button or switch to cycle through the available melody options.
Manteniment
Push Button Battery Replacement
When the push button stops functioning or its transmission range significantly decreases, it is time to replace the battery. Open the push button casing, carefully remove the old 12V battery, and insert a new one, ensuring correct polarity (+/-). Close the casing de manera segura.
Neteja
Clean the chime receiver and push button with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El timbre no sona quan es prem el botó. | Chime receiver not powered. Push button battery is dead or low. Les unitats estan fora de l'abast o obstruïdes. Units are not synchronized. | Ensure chime receiver is securely plugged into a working electrical outlet. Replace the 12V battery in the push button. Reposition the chime receiver or push button to reduce distance or obstructions. Ensure they are within 100 feet. Perform re-synchronization: Unplug receiver, remove push button battery. Reinsert push button battery, then plug in receiver. Press push button immediately. |
| Reduced transmission range. | Obstruccions (parets gruixudes, objectes metàl·lics). Low push button battery. | Try repositioning the chime receiver or push button to minimize obstructions. Replace the 12V battery in the push button. |
Especificacions
- Número de model: SL-6167-C
- Pes de l'article: 8.1 unces
- Dimensions del producte: 10.24 x 6.5 x 11.82 polzades
- Font d'alimentació (timbre): Endoll de 120 V CA
- Font d'alimentació (botó): 1 bateria de 12 V (inclosa)
- Color: Blanc
- Material: Policarbonat
- Interval de transmissió: Fins a 100 peus (línia de visió)
- Melodies: 8-note Westminster, 2-note melody
Garantia
This Heath Zenith product is covered by a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty service, please retain your proof of purchase.
Suport
For further assistance, technical support, or to inquire about replacement parts, please contact Heath Zenith customer service. Refer to the product packaging or the manufacturer's weblloc web per obtenir informació de contacte actualitzada.
