Informació important de seguretat
Please read this entire manual before installing or using your Cadet Com-Pak Electric Wall Heater. Failure to follow these instructions may result in fire, electric shock, property damage, or personal injury. Keep this manual for future reference.
- Instal·lació professional recomanada: Installation of this electric wall heater requires a dedicated electrical circuit from the main panel. It is strongly recommended that installation be performed by a qualified, licensed electrician to ensure compliance with all local and national electrical codes.
- Risc elèctric: Disconnect all power to the heater at the main service panel before attempting any wiring, installation, or maintenance.
- Perill d'incendi: Do not place clothing, curtains, or other combustible materials within 3 feet (0.9 meters) of the heater. Do not block air intake or exhaust openings.
- Superfície calenta: The heater grille and internal components become hot during operation. Avoid contact to prevent burns.
- Advertència de la proposta 65: Aquest producte us pot exposar a substàncies químiques, com ara el plom, que l'estat de Califòrnia sap que causa càncer i defectes de naixement o altres danys reproductius. Per a més informació aneu a www.P65Warnings.ca.gov.
Producte acabatview
The Cadet Com-Pak Electric Wall Heater (Model CSC151TW) is a complete unit designed for supplemental or primary heating in various indoor spaces. It features a built-in thermostat for temperature control and is rated for 5120 BTU, 120 Volt, and 1500 Watt operation. Its compact design allows for discreet wall installation.
Imatge: Davant view of the Cadet Com-Pak Electric Wall Heater, showing the white grille and integrated thermostat dial at the bottom.
Imatge: The Cadet Com-Pak Electric Wall Heater discreetly installed on a wall in a modern living room setting, demonstrating its compact size and integration into a home environment.
Imatge: Un va explotar view of the Cadet Com-Pak Electric Wall Heater, illustrating its main components: the wall can (rough-in box), the heating element and fan assembly, and the front grille with thermostat.
Configuració i instal·lació
Proper installation is crucial for the safe and efficient operation of your Com-Pak heater. Refer to the detailed installation instructions provided with the product packaging for specific wiring diagrams and mounting procedures. The following points highlight key considerations:
- Ubicació: Choose a wall location that allows for proper air circulation and is away from combustible materials. Ensure adequate clearance from floors, ceilings, and adjacent walls as specified in the full installation guide.
- Circuit dedicat: This heater requires a dedicated 120-volt, 15-amp circuit. Do not connect to an existing circuit that powers other appliances or outlets.
- Wall Can Installation: The heater includes a wall can (rough-in box) that must be securely mounted between wall studs. Ensure the wall cavity is properly insulated around the wall can to prevent heat loss into the wall structure.
- Cablejat: All wiring must comply with national and local electrical codes. Connect the heater directly to the dedicated circuit using appropriate gauge wiring.
- Integració del termòstat: This model includes a built-in mechanical thermostat. No external thermostat wiring is required.
Imatge: An infographic titled "HOW TO CHOOSE THE RIGHT CADET WALL HEATER" providing guidance on selecting the correct size based on room area and wattage, understanding voltage requirements (120V vs. 240V), choosing thermostat types (electronic vs. mechanical), and general installation tips, including the need for hard-wiring and professional assistance.
For detailed dimensions to assist with rough-in and placement, refer to the diagram below:
Imatge: Un costat view of the Cadet Com-Pak Electric Wall Heater with key dimensions indicated: 12 inches (30.5 cm) height, 9 inches (22.9 cm) width, and 1 inch (2.5 cm) depth from the wall surface.
Instruccions de funcionament
Your Cadet Com-Pak heater is equipped with a built-in mechanical thermostat for easy temperature control.
- Encès: Ensure the circuit breaker supplying power to the heater is in the "ON" position.
- Temperatura establerta: Rotate the thermostat dial located on the front grille to your desired comfort level. Turning the dial clockwise will increase the temperature setting, and counter-clockwise will decrease it. The heater will activate when the room temperature falls below the set point and deactivate once the set temperature is reached.
- Funcionament inicial: During the first few hours of operation, it is normal for the heater to emit a slight odor. This is due to the burning off of manufacturing oils and coatings and will dissipate with continued use. Ensure adequate ventilation during this period.
- Apagat: To turn the heater off, rotate the thermostat dial counter-clockwise to its lowest setting or turn off the dedicated circuit breaker.
Manteniment
Your Cadet Com-Pak heater requires minimal maintenance. Always disconnect power at the circuit breaker before performing any maintenance.
- Neteja de la reixa: Periodically, use a soft, damp cloth to wipe down the exterior grille. Do not use abrasive cleaners or solvents.
- Neteja interior: If dust accumulates inside the heater, carefully remove the front grille (refer to installation instructions for removal) and use a vacuum cleaner with a brush attachment to gently clean the heating element and fan blades. Ensure no foreign objects are left inside the unit. Reinstall the grille securely.
- No cal lubricació: The motor is permanently lubricated and requires no additional oiling.
Resolució de problemes
If your heater is not operating correctly, consult the following table before contacting customer support.
| Problema | Causa possible | Solució |
|---|---|---|
| L'escalfador no s'encén. |
|
|
| Heater runs continuously or does not turn off. |
|
|
| El ventilador no funciona. |
|
|
| Unusual odors during operation. |
|
|
Especificacions
| Número de model | CSC151TW |
| Número de part | 67509 |
| Marca | Cadet |
| Voltage | 120 Volts |
| Wattage | 1500 watts |
| Sortida BTU | 5120 BTU |
| Dimensions (A x A x P) | 12 x 9 x 4 inches (approximate, unit depth from wall surface is 1 inch) |
| Pes | 7 lliures |
| Color | Blanc |
| Termòstat | Built-in Mechanical |
| Ús interior/exterior | Només interior |
Garantia i assistència al client
Cadet products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official Cadet website. In the event you require technical assistance, replacement parts, or have questions not covered in this manual, please contact Cadet customer support.
Fabricant: Cadet Heating HI (also known as Glen-Dimplex USA)
La informació de contacte normalment es pot trobar a la fitxa del fabricant weblloc web o a l'embalatge del producte.
