LUX TX9000TS Touch Screen Seven-Day Programmable Thermostat User Manual

Introducció

This manual provides detailed instructions for the installation, operation, and programming of your LUX TX9000TS Touch Screen Seven-Day Programmable Thermostat. Please read this manual thoroughly before beginning installation or operation to ensure proper use and to maximize the energy-saving benefits of your new thermostat.

Característiques clau

• Easy-to-use touch-screen interface with electroluminescent display.
• Seven-day programming with four periods per day (Morning, Day, Evening, Night).
• Pre-programmed default Energy Star-approved schedule for energy savings.
• Adjustable two-minute or five-minute delay for system cycling.
• Filter usage monitor with settings from 0 to 720 hours of use.
• Audible touch confirmation for registered selections.
• Indicador de bateria baixa.
• Keyboard lockout feature for unauthorized user prevention.

Contingut del paquet

• One LUX TX9000TS programmable thermostat
• Maquinari de muntatge
• Manual d'usuari (aquest document)

Note: Batteries are not included. Two AA alkaline batteries are required for operation.

Instal·lació

Precaucions de seguretat

• Desconnecteu sempre l'alimentació del sistema de calefacció/refrigeració al fusible principal o a l'interruptor automàtic abans d'instal·lar o fer el manteniment del termòstat.
• This thermostat is designed for low voltage (24-volt) systems only. Do not use with line voltagsistemes electrònics.

Muntatge del termòstat

The TX9000TS is designed for wall mounting. Ensure the mounting location is away from drafts, direct sunlight, and heat sources for accurate temperature readings. Remove your old thermostat and use the provided mounting hardware to secure the new backplate to the wall.

Imatge: posterior view of the thermostat backplate, showing the wiring terminals labeled W, Y, G, R, RC, RH, and C. A warning label indicates 'LOW VOLTAGE ONLY'.

Instruccions de cablejat

The TX9000TS is compatible with most 24-volt systems, including single-stage systems, heating-only and cooling-only systems, furnace systems, central air-conditioning systems, heat pumps without auxiliary heat, two-wire hydronic systems, and 750-millivolt systems.

Refer to the wiring diagram provided with your specific heating/cooling system for correct terminal connections. Connect the wires from your system to the corresponding terminals on the thermostat's backplate. Ensure all connections are secure.

Imatge: Interna view of the LUX TX9000TS thermostat's circuit board, showing various electronic components and connection points. This view is typically seen during installation or servicing.

Configuració i configuració inicials

Instal·lació de la bateria

Install two AA alkaline batteries into the battery compartment located behind the flip-down cover on the front of the thermostat unit. Ensure correct polarity. The thermostat requires batteries for operation and to retain settings during power outages.

Imatge: The LUX TX9000TS thermostat mounted on a wall, with its lower front panel flipped open to expose the battery compartment and the HEAT/OFF/COOL and FAN ON/AUTO switches.

Configuració de l'hora i el dia

Upon initial power-up or after battery replacement, the thermostat will prompt you to set the current time and day of the week using the touch screen interface. Follow the on-screen instructions to accurately set these parameters.

Funcionament del termòstat

Comprensió de la pantalla

Imatge: The main display of the LUX TX9000TS thermostat, illuminated with a blue backlight. It shows 'HEAT MODE', 'TUE DAY', current time '5:37', and room temperature '72°' with a flame icon, indicating heating is active. 'HOLD' is also displayed.

The large blue electroluminescent display clearly shows the current day, time, room temperature, and system status (e.g., HEAT MODE, COOL MODE, HOLD). Snowflake and flame icons indicate cooling or heating mode respectively. Audible touch confirmation indicates that your choices are being registered.

Selecció del mode del sistema

Use the physical switches located behind the flip-down cover to select the desired system mode: CALOR, OFF, o GENIAL.

Funcionament del ventilador

Use the physical switches located behind the flip-down cover to select the desired fan mode: ON (continuous operation) or AUTO (fan runs only when heating or cooling is active).

Ajust de temperatura

To temporarily adjust the temperature, simply touch the desired temperature on the screen and use the up/down arrows. This will initiate a temporary hold until the next programmed period.

Funció Hold

The "HOLD" function allows you to maintain a specific temperature indefinitely, overriding the programmed schedule. To activate or deactivate, refer to the on-screen prompts or press the 'HOLD' button if available on your model's interface.

Programació de l'horari

The TX9000TS allows for seven-day programming, with up to four distinct time and temperature settings per day (Morning, Day, Evening, Night). You can set a different program for each day of the week to customize your home's heating and cooling schedule.

Passos de programació

1. Access the programming menu via the touch screen. The exact method may vary; typically, a 'Program' or 'Menu' button will be present.
2. Seleccioneu el dia de la setmana que voleu programar.
3. Set the start time and desired temperature for each of the four periods (Morning, Day, Evening, Night).
4. Utilize the "COPY" function, if available, to duplicate settings from one day to another, simplifying the programming process.
5. Confirm your settings and exit the programming menu to save your schedule.

Default Energy-Saving Program

The thermostat comes pre-programmed with a default energy-conserving heating and cooling schedule. This schedule is designed to save up to $180 in energy costs over one year by optimizing temperature settings.

Manteniment

Canvi de bateria

When the "REPLACE" icon appears on the display, it indicates that the batteries are low and need to be replaced. Replace with two fresh AA alkaline batteries promptly to avoid loss of settings and ensure continuous operation.

Filter Usage Monitor

The thermostat includes a filter usage monitor, allowing you to set limits from 0 to 720 hours of use. The display will indicate when it's time to check or replace your system's air filter, promoting efficient system operation and air quality.

Neteja

Clean the thermostat's touch screen and exterior with a soft, slightly damp cloth. Avoid abrasive cleaners, solvents, or chemical sprays, as these can damage the display or casing.

Resolució de problemes

Problemes comuns i solucions

• No Display/Thermostat Unresponsive: Check battery installation and ensure fresh AA alkaline batteries are used. Verify power to the heating/cooling system is on at the main breaker.
• Lectures de temperatura incorrectes: Ensure the thermostat is not exposed to drafts, direct sunlight, or heat sources that could affect its internal sensor.
• System Not Responding to Settings: Check system mode (HEAT/COOL/OFF) and fan mode (ON/AUTO) switches. Verify wiring connections at the backplate. Ensure the 'HOLD' function is not active if you expect the programmed schedule to run.
• Problemes de programació: Review programming steps carefully. If settings are lost, replace batteries and reprogram.

For persistent issues not resolved by these steps, consult a qualified HVAC technician.

Especificacions

Garantia i Suport

Informació de la garantia

The LUX TX9000TS Thermostat is backed by a 1-year limited warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.

Atenció al client

For technical assistance, troubleshooting, or further inquiries regarding your LUX TX9000TS thermostat, please contact LUX customer support. Refer to the official LUX weblloc (www.luxproducts.com) for current contact information, FAQs, and additional resources.