Introducció
The Electro-Harmonix LPB-1 Linear Power Booster is a faithful recreation of the original 1968 circuit, designed to increase the gain and saturation of your amplifier. This pedal adds impact and definition to your tone, making it suitable for boosting the input of other effects or directly driving your amplificador per a un so millorat.
Contingut del paquet
- Electro-Harmonix LPB-1 Linear Power Booster Pedal
- Bateria de 9 V
Configuració
Engegant el pedal
The LPB-1 pedal can be powered by either a 9V battery or an optional 9V DC power adapter (center negative). A 9V battery is included with the pedal.
- Instal·lació de la bateria: To install or replace the 9V battery, unscrew the four screws on the bottom plate of the pedal. Carefully remove the bottom plate and connect the 9V battery to the battery clip. Replace the bottom plate and secure the screws.
- Adaptador de CA (opcional): For extended use, an external 9V DC power adapter (center negative) can be connected to the DC input jack on the pedal. Ensure the adapter meets the specified voltage i requisits de polaritat.
Connectant el pedal
Use standard 1/4 inch (6.35mm) instrument cables to connect the LPB-1 to your guitar and amplifier o altres pedals d'efectes.
- Connecteu la vostra guitarra al ENTRADA jack on the right side of the pedal.
- Connecteu el AMP (output) jack on the left side of the pedal to your amplifier's input or to the input of the next pedal in your signal chain.
Funcionament
Controls
- Boost BOOST: This is the primary control for the LPB-1. Turning this knob clockwise increases the output gain of the pedal, providing a louder and more saturated signal. Counter-clockwise rotation decreases the gain.
- Interruptor de peu: Engages or bypasses the effect. The LPB-1 features true bypass switching, ensuring your signal remains unaffected when the pedal is disengaged.
- Indicador LED: Illuminates when the effect is active.
Consells d'ús
- Signal Boost: Use the LPB-1 to increase the overall volume of your signal for solos or to push the front end of your amplifier into natural overdrive.
- Effect Enhancement: Place the LPB-1 before other effects like overdrive or distortion pedals to increase their input signal, resulting in more gain and sustain from those effects.
- Signal Restoration: If you have a long signal chain with multiple pedals, the LPB-1 can be placed at the end of your chain (before the amplifier) to restore any lost signal strength and clarity.
Especificacions
| Característica | Detall |
|---|---|
| Número de model | NLPB1 |
| Pes de l'article | 10.4 unces (0.65 lliures) |
| Dimensions del producte | 5.75 x 2.75 x 3.45 polzades (4.5" de llargada x 2.75" d'amplada x 2.1" d'alçada) |
| Material del cos | Metall |
| Tipus de connector | Presa d'àudio de 1/4 de polzada (6.35 mm) |
| Interfície del maquinari | Àudio d'1/4 de polzada |
| Format del senyal | Analògic |
| Font d'alimentació | Battery Powered (9V battery included) |
| Voltage | 9 Volts |
Resolució de problemes
- Sense so: Check all cable connections. Ensure the guitar, pedal, and amplifier are properly connected. Verify the 9V battery is correctly installed and has sufficient charge, or that the AC adapter is functioning and properly connected.
- Senyal feble: If the signal is weak even with the BOOST knob turned up, check the battery level. Ensure all cables are in good condition and fully inserted.
- Soroll/bruix excessiu: Try using a different power source (e.g., a fresh battery or a high-quality isolated power supply). Ensure all cables are shielded and away from power lines or other sources of interference.
- Pedal Not Engaging: Ensure the footswitch is fully pressed. If using an AC adapter, confirm it's providing power.
Manteniment
- Neteja: Netegeu el pedal amb un drap suau i sec. Eviteu utilitzar productes de neteja o dissolvents abrasius.
- Emmagatzematge: Guardeu el pedal en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes. Si el guardeu durant un període prolongat, traieu la bateria per evitar fuites.
- Connexions: Periodically check all input/output jacks and power connections for any signs of wear or damage.
Garantia i Suport
Electro-Harmonix products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official Electro-Harmonix weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
Per obtenir més ajuda, visiteu el Electro-Harmonix Store.
