Astatic 302-10005 D104M6B Amplified Ceramic Power 4-Pin CB Microphone

1. Introducció

This manual provides instructions for the Astatic 302-10005 D104M6B Amplified Ceramic Power 4-Pin CB Microphone. Designed for superior performance in mobile environments, this microphone offers clear and reliable communication for CB radio users.

Característiques principals:

• Amplified Ceramic Power Element
• 4-Pin CB Connection
• Durable Molded Black ABS Housing
• Chrome-Plated Grille Screen
• External Gain Control
• Flexible Coiled Cord (7.5 feet)

Image 1.1: The Astatic D104M6B microphone, showcasing its design and coiled cord.

2. Configuració i instal·lació

2.1 Instal·lació de la bateria

The Astatic D104M6B requires one 9V battery (not included) for its amplified ceramic power element. Follow these steps to install the battery:

1. Locate the four screws on the back cover of the microphone.
2. Carefully remove the screws and detach the back cover.
3. Insert a new 9V battery into the battery compartment. Ensure correct polarity. The circuit board has direct battery attachments; support the circuit board with a finger while pressing the battery into place to prevent damage.
4. Replace the back cover and secure it with the four screws.

Imatge 2.1: posterior view of the microphone, indicating the location for battery access and gain control.

2.2 Connecting to Your CB Radio

This microphone features a standard 4-pin connector for compatibility with most CB radios. Ensure your CB radio is powered off before connecting the microphone.

1. Align the 4-pin connector of the microphone with the microphone port on your CB radio.
2. Gently push the connector into the port until it is fully seated.
3. Secure the connection by tightening the threaded collar on the microphone connector, if present, to the radio's port.

3. Instruccions de funcionament

3.1 Transmissió (Premeu per parlar)

To transmit your voice, firmly press and hold the Push-to-Talk (PTT) button located on the side of the microphone. Release the button to stop transmitting and return to receive mode.

3.2 Adjusting Microphone Gain (Volume)

The Astatic D104M6B includes an external gain control knob on the back of the microphone. This allows you to adjust the output volume of your voice. Experiment with this setting to achieve optimal audio clarity and power for your specific CB radio and operating conditions.

• Start with the gain control at a lower setting (e.g., 25% or '3' on a scale of 10).
• Transmit a test message and ask for an audio report from another station.
• Gradually increase the gain until your audio is clear and strong without distortion or feedback.
• Avoid setting the gain too high, as this can cause over-modulation, distortion, and potential feedback, especially if your radio has a talk-back feature.

4. Manteniment

4.1 Atenció general

To ensure the longevity and optimal performance of your microphone:

• Keep the microphone clean and free from dust and debris. Use a soft, dry cloth for cleaning the housing.
• Avoid exposing the microphone to extreme temperatures, moisture, or direct sunlight for extended periods.
• Handle the coiled cord carefully to prevent kinks or damage.

4.2 Substitució de la bateria

Replace the 9V battery when you notice a decrease in audio output or clarity, or if the microphone stops transmitting amplified audio. Refer to Section 2.1 for battery installation instructions.

5. Solució De Problemes

5.1 No Audio Output or Weak Audio

• Comproveu la bateria: Ensure a fresh 9V battery is correctly installed.
• Control de guany: Verify the microphone gain control is not set too low or completely off. Adjust as needed (refer to Section 3.2).
• Connexió: Confirm the 4-pin connector is securely attached to your CB radio.
• Configuració de ràdio: Check your CB radio's microphone gain or volume settings.

5.2 Distorted Audio or Feedback

• Control de guany: The microphone gain may be set too high. Reduce the gain control setting (refer to Section 3.2).
• Proximitat: If using a radio with a talk-back feature, feedback can occur if the microphone is too close to the radio's speaker.
• Configuració de ràdio: Check your CB radio's internal microphone gain or audio processing settings.

6. Especificacions

7. Garantia i Suport

7.1 Informació de la garantia

This Astatic microphone comes with a one-year factory warranty. Please retain your proof of purchase for warranty claims.

7.2 Atenció al client

For further assistance or technical support, please refer to the contact information provided with your product packaging or visit the official Astatic weblloc.