Lutron LC-300NLH-WH

Lutron Attache LC-300NLH-WH On-Cord Lamp Manual d'usuari del dimmer

Model: LC-300NLH-WH

1. Introducció

This manual provides instructions for the installation, operation, and maintenance of the Lutron Attache LC-300NLH-WH 300-watt Single Pole On-Cord Lamp Dimmer. This device is designed to control the light output of incandescent and halogen lamps connected to a standard lamp cord. It features a slider for dimming and a red LED locator light for visibility in low-light conditions.

2. Informació de seguretat

WARNING: To avoid fire, shock, or death; turn off power at circuit breaker or fuse and test that power is off before wiring!

3. Configuració i instal·lació

3.1 Eines necessàries

3.2 Passos d'instal·lació

  1. Desconnecteu l'alimentació: Desendolleu la lamp from the wall outlet before beginning installation.
  2. Prepare Lamp Cordó: Select a suitable location on the lamp cord, typically between the lamp base and the wall plug. Carefully cut the lamp cord at this point.
  3. Open Dimmer Housing: Use a small flat-head screwdriver to gently pry open the dimmer housing. It usually consists of two halves that snap together.
  4. Strip Wires: For each cut end of the lamp cord, carefully strip approximately 1/2 inch (12 mm) of insulation from both wires. Ensure the copper strands are not damaged.
  5. Connecteu els cables: Insert one stripped wire from each cut end into the designated terminals within the dimmer housing. The terminals are typically marked or have spring-loaded clamps. Ensure wires are fully inserted and securely held.
  6. Close Dimmer Housing: Carefully align the two halves of the dimmer housing and snap them back together, ensuring no wires are pinched.
  7. Prova: Connecteu la lamp back into the wall outlet. The red LED locator light should glow softly. Operate the slider to test the dimming function.
Lutron Attache LC-300NLH-WH On-Cord Lamp Dimmer

Image: Lutron Attache LC-300NLH-WH On-Cord Lamp Dimmer. This image shows the compact design of the dimmer, which attaches directly to the lamp cordó.

4. Instruccions de funcionament

4.1 Encesa/Apagada i regulació de la intensitat

4.2 Locator Light

The integrated red LED locator light glows softly when the dimmer is plugged in, making it easy to locate the dimmer in a dark room.

5. Manteniment

The Lutron Attache dimmer requires minimal maintenance. Keep the dimmer clean by wiping it with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the dimmer is unplugged from the wall outlet before cleaning.

6. Solució De Problemes

ProblemaCausa possibleSolució
Lamp no s'encén ni s'atenua.No power to the dimmer.
Cablejat incorrecte.
Bombeta cremada.
Comproveu si la lamp is plugged in and the wall outlet has power.
Verify wiring connections inside the dimmer housing.
Substituïu la bombeta.
Dimmer does not dim properly or flickers.Tipus de bombeta incompatible.
Load exceeds maximum wattage.
Connexió de cablejat solta.
Ensure you are using incandescent or halogen bulbs.
Verify total wattage of bulbs does not exceed 300W.
Check wiring connections for tightness.
Red LED locator light is off.No power to the dimmer.Comproveu si la lamp is plugged in and the wall outlet has power.

7. Especificacions

CaracterísticaDetall
Número de modelLC-300NLH-WH
Wattage300 watts (màxim)
Voltage120 Volts
Mode d'operacióManual
Tipus d'actuadorControl lliscant
Tipus de circuitPol únic
Tipus de bombetes compatiblesIncandescent, Halògen
Dimensions (L x A x A)3 x 1.5 x 1 polzades (aproximadament)
ColorBlanc

8. Garantia i Suport

Lutron products are designed for quality and reliability. For specific warranty information, please refer to the documentation included with your purchase or visit the official Lutron website. For technical support or further assistance, please contact Lutron customer service through their official channels.

Documents relacionats - LC-300NLH-WH

Preview Lutron Sunnata LED+ RF Dimmer ARST-PRO-N Guia d'instal·lació
Guia d'instal·lació completa per al regulador d'intensitat LED+ RF de Lutron Sunnata (ARST-PRO-N), que cobreix el cablejat, la configuració, el funcionament i la resolució de problemes per a instal·lacions unipolars.
Preview Lutron Caséta sense fil endollable Lamp Guia d'inici ràpid del regulador d'intensitat i del comandament a distància Pico
Guia d'inici ràpid per instal·lar i utilitzar el connector sense fil Lutron Casétaamp regulador d'intensitat (PD-3PCL-WH) i comandament a distància Pico (PJ2-3BRL-WH-L01R), que cobreix la configuració, l'emparellament, la resolució de problemes i les especificacions.
Preview Guia d'instal·lació ràpida del regulador d'intensitat LED Lutron STCL-153P
Una guia d'instal·lació ràpida per al regulador d'intensitat LED+ Lutron STCL-153P, que inclou instruccions de cablejat per a aplicacions unipolars i de 3 vies, informació sobre la reducció de potència i ajustos de regulació de gamma baixa.
Preview Guia d'instal·lació ràpida del regulador d'intensitat LED+ RCL-153PNL de Lutron
Aquesta guia proporciona instruccions d'instal·lació ràpida per al regulador d'intensitat LED+ Lutron RCL-153PNL, que cobreix aplicacions unipolars i de 3 vies, cablejat, ajustos i notes de seguretat importants.
Preview Regulador d'intensitat LED+ Lutron Diva: especificacions, característiques i guia de cablejat
Especificacions completes, característiques, opcions de color i diagrames de cablejat per a l'interruptor regulador d'intensitat Lutron Diva LED+, dissenyat per a bombetes LED regulables, CFL, halògenes i incandescents.
Preview Diagrames de cablejat de Lutron Caséta: aplicacions de 3 vies i unipolars
Diagrames tècnics i instruccions per al cablejat dels reguladors d'intensitat Lutron Caséta en aplicacions de 3 vies i unipolars, inclosa la integració remota Pico. Inclou explicacions detallades de les connexions de cables i els circuits elèctrics.