Introducció
The Intermatic EI220W is an in-wall countdown timer designed to provide automatic shut-off for various electrical applications. This timer offers silent operation and multiple time settings, making it a practical solution for controlling lights, fans, and other appliances. It is designed to replace standard single-pole switches.
Figura 1: Frontal view of the Intermatic EI220W In-Wall Countdown Timer.
Informació de seguretat
Proposition 65 Warning: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
This device operates on 120 volts. Always ensure power is turned off at the circuit breaker before attempting any installation or maintenance. Consult a qualified electrician if you are unsure about any wiring procedures.
Característiques del producte
- Provides 1/2/4/8 Hour time ranges.
- Available in White finish.
- Provides silent operation.
- Replaces single-pole switches in a variety of applications.
- CFL compatible with all EI200 series timers (EI210W, EI220W, etc.), EI500C, EI500WC, EI500LAC, EI600C and EI600LAC.
- Designed for use with a decorator-style wall plate (NOT included).
Configuració i instal·lació
The Intermatic EI220W In-Wall Countdown Timer is designed for straightforward installation, replacing existing single-pole switches. Ensure you have a decorator-style wall plate (not included) for a complete installation.
- Apagueu l'alimentació: Before beginning any electrical work, always turn off the power to the switch location at the main circuit breaker. Verify the power is off using a voltage provador.
- Treure l'interruptor antic: Carefully remove the existing wall plate and disconnect the old switch. Note the wiring connections.
- Connecteu el temporitzador: Connect the wires from the wall box to the corresponding terminals on the EI220W timer. Refer to the wiring diagram provided on the unit or in the detailed instructions that come with the product. Typically, this involves connecting Hot, Load, Ground, and Neutral wires.
- Muntar el temporitzador: Gently push the wired timer into the wall box, ensuring all wires are neatly tucked in to allow for a flush mount. Secure the timer to the wall box using the provided screws.
- Instal·leu la placa de paret: Attach your decorator-style wall plate over the timer.
- Restaura l'alimentació: Torneu a connectar l'alimentació a l'interruptor principal.
Figura 2: lateral view of the timer with wiring diagram for installation.
Instruccions de funcionament
The EI220W timer offers simple operation for setting countdown periods or continuous operation.
- Selecció d'un temps de compte enrere: Press the main button repeatedly to cycle through the available countdown settings: 1 hour, 2 hours, 4 hours, and 8 hours. An indicator light next to the selected time will illuminate. The connected appliance will remain on for the selected duration and then automatically turn off.
- Continuous Operation (HOLD): To keep the connected appliance on indefinitely, press the main button until the 'HOLD' indicator light illuminates. In this mode, the timer will not automatically shut off the appliance.
- Apagat: To turn off the appliance before the countdown finishes or from 'HOLD' mode, press the main button until all indicator lights are off.
Manteniment
The Intermatic EI220W In-Wall Countdown Timer requires minimal maintenance. Keep the surface clean by wiping it with a soft, dry cloth. Do not use abrasive cleaners or solvents. Periodically check the wall plate and mounting screws to ensure they are secure.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El temporitzador no s'encén/s'apaga. | No power to the switch; incorrect wiring; faulty unit. | Check circuit breaker. Verify wiring connections are correct. If issues persist, the unit may need replacement. |
| Timer stops working after several years. | Unit has reached the end of its operational lifespan. | Electronic timers have a finite lifespan. Replacement is typically required. |
| Timer does not sit flush in the wall outlet. | Wires are not properly tucked into the electrical box. | Carefully re-tuck wires to create sufficient space for the timer to sit flush. Ensure no wires are pinched. |
Especificacions
| Atribut | Valor |
|---|---|
| Número de model | EI220W |
| Marca | Intermatic |
| Color | Blanc |
| Material | Plàstic, resina |
| Dimensions del producte | 1.44 "P x 1.69" W x 4.13" H |
| Pes de l'article | 0.34 lliures (5.4 unces) |
| Voltage | 120 Volts |
| Tipus de canvi | 2 vies |
| Tipus de muntatge | Muntatge de paret |
| Estil de commutació | SPST |
| Certificació | UL |
| Nombre de configuracions | 2 (Countdown, Hold) |
| UPC | 885173442235, 078275095274, 635409437173, 885209397997 |
Garantia
The Intermatic EI220W In-Wall Countdown Timer comes with a 1-year warranty. This warranty covers replacement of the unit; labor costs are not included.
Atenció al client
For additional support, product information, or to explore other Intermatic products, please visit the official Intermatic Store:
