1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your KOHLER K-T197-CP Falling Water Wall-Mount Lavatory Faucet Trim. Please read all instructions thoroughly before beginning installation to ensure proper function and to prevent damage.
The KOHLER K-T197-CP features a distinctive wall-mount design with a single-control handle and a 10-1/4 inch spout, offering a modern aesthetic and reliable performance. Its solid brass construction ensures durability, and the KOHLER finish resists corrosion and tarnishing.
2. Informació de seguretat
- Tanqueu sempre el subministrament principal d'aigua abans d'instal·lar o fer el manteniment de l'aixeta.
- Feu servir equips de protecció individual adequats, com ara ulleres de seguretat, durant la instal·lació.
- Si teniu dubtes sobre alguna part del procés d'instal·lació, consulteu un lampista qualificat.
- Assegureu-vos que totes les connexions estiguin ben fixades per evitar fuites.
- Do not overtighten components, as this may cause damage.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- Falling Water Wall-Mount Lavatory Faucet Spout
- Single-Control Handle Assembly
- Maquinari de muntatge
- Manual d'instruccions (aquest document)
Image 3.1: The KOHLER K-T197-CP Falling Water Wall-Mount Lavatory Faucet Trim, featuring a polished chrome finish, a curved spout, and a single control handle.
4. Eines necessàries
Normalment es necessiten les eines següents per a la instal·lació:
- Clau anglesa ajustable
- Tornavís Phillips
- Tornavís de cap pla
- Massilla de lampista o segellador de silicona
- Thread Seal Tape (PTFE)
- Cinta mètrica
- Nivell
- Drill (with appropriate bits for wall material)
5. Configuració i instal·lació
This faucet trim requires a wall-mount valve (sold separately). Install the wall-mount valve according to its specific installation guide before proceeding with the trim installation.
5.1 Rough-in Dimensions and Requirements
Refer to the technical drawings for precise rough-in dimensions and hole requirements. A finished wall is required for proper installation.
- One 1-7/8 inch (48 mm) diameter cutout hole is required for the spout.
- One 1-7/8 inch (48 mm) diameter cutout hole is required for the handle.
- Ensure adequate spacing between the hot and cold supply lines as indicated in the diagrams.
Image 5.1: Technical drawing illustrating the required dimensions and spacing for the wall-mount installation of the faucet trim, including the hot and cold water supply connections.
Image 5.2: Technical drawing providing additional detailed dimensions for the handle and spout components, crucial for accurate wall-mount positioning.
5.2 Trim Installation Steps
- Prepara el mur: Ensure the finished wall surface is clean and dry. The rough-in valve should be securely installed and tested for leaks according to its own instructions.
- Install the Spout: Apply a bead of silicone sealant around the base of the spout where it meets the wall. Insert the spout into the designated wall opening, ensuring it is level. Secure the spout from behind the wall if necessary, following the valve's instructions.
- Install the Handle Assembly: Connect the handle assembly to the valve body according to the valve's instructions. Ensure the handle operates smoothly and the cartridge is properly seated. Apply sealant around the escutcheon if required.
- Connect Water Supplies: Ensure hot and cold water supply lines are correctly connected to the valve.
- Prova de fuites: Slowly turn on the main water supply. Check all connections for leaks. If leaks are detected, turn off the water, tighten connections, and retest.
- Netegeu el sistema: Remove the aerator from the spout. Turn on the water and let it run for a few minutes to flush out any debris from the supply lines. Turn off the water, reinstall the aerator, and tighten securely.
6. Instruccions de funcionament
The KOHLER K-T197-CP features a single-control handle for both water flow and temperature adjustment.
- Per activar/desactivar: Lift the handle to turn on the water. Push the handle down to turn off the water.
- To Adjust Water Flow: Com més s'aixeca la maneta, més gran serà el cabal d'aigua.
- Per ajustar la temperatura: Rotate the handle left for hotter water and right for colder water.
7. Manteniment
Proper care and cleaning will maintain the finish and performance of your KOHLER faucet.
- Neteja: Netegeu l'aixeta amb un suau, damp cloth. Do not use abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Manteniment de l'airejador: Periodically unscrew the aerator from the spout and rinse it to remove any mineral deposits or debris that may restrict water flow.
- Protecció d'acabat: KOHLER finishes are designed to resist corrosion and tarnishing. Regular cleaning with mild soap and water is sufficient to maintain its appearance.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Baix cabal d'aigua | Clogged aerator; partially closed stopcock; debris in supply line. | Clean aerator; ensure stopcocks are fully open; flush supply lines. |
| Fuites a les connexions | Connexions soltes; volanderes/juntes tòriques desgastades. | Estrenyeu les connexions; substituïu les volanderes/juntes tòriques si estan danyades. |
| Stiff Handle Operation | Cartridge not properly seated or installed with incorrect tension. | Refer to the valve installation guide to ensure the cartridge is correctly installed and tensioned. |
| Problemes de temperatura de l'aigua | Incorrect hot/cold supply connections; valve cartridge issue. | Verify supply line connections; consult valve manual for cartridge adjustment or replacement. |
9. Especificacions
- Model: K-T197-CP
- Marca: Kohler
- Tipus de muntatge: Muntatge de paret
- Acabat: Polished Chrome (Brass base material)
- Material: Solid Brass construction
- Nombre de nanses: 1
- Recompte de forats: 2
- Característica especial: Falling Water Design
- Estil: Modern
- Cabal màxim: 1.5 galons per minut (GPM)
- Abast del bec: 10.25 polzades
- Ubicació de la nansa: Muntatge en paret
- Disseny del broc: Cascada
- Pes de l'article: 2.6 lliures
- Dimensions del producte: 12.25 x 9.5 x 3.25 polzades
- Certificació: WaterSense
10. Garantia i Suport
Aquest producte KOHLER està cobert per una Garantia limitada de per vida. This warranty covers defects in material and workmanship for the duration of the original consumer purchaser's ownership, provided the product is installed, used, and maintained according to the instructions in this manual.
For detailed warranty information, technical assistance, or replacement parts, please visit the official KOHLER website or contact KOHLER customer service directly. Contact information can typically be found on the KOHLER weblloc o embalatge del producte.
