Performance Tool W1159 5-Piece Interchangeable Jaw Snap Ring Plier Set Instruction Manual

1. Introducció

This manual provides instructions for the safe and effective use of the Performance Tool W1159 5-Piece Interchangeable Jaw Snap Ring Plier Set. This versatile tool set is designed for installing and removing both internal and external snap rings, offering various jaw angles for different applications. Please read this manual thoroughly before operation and retain it for future reference.

2. Informació de seguretat

Always observe the following safety precautions when using this tool set:

• Porteu protecció ocular: Always wear ANSI-approved safety goggles or safety glasses with side shields when using snap ring pliers. Snap rings can dislodge and cause eye injury.
• Inspeccioneu l'eina abans d'utilitzar-la: Before each use, inspect the pliers and jaw tips for any signs of damage, wear, or deformation. Do not use damaged tools.
• Use Correct Jaw for Application: Ensure the correct jaw type (straight, 45-degree, or 90-degree) and size are selected for the specific snap ring being worked on.
• Adherència segura: Maintain a firm and secure grip on the pliers and the workpiece. The vinyl grip handles are designed for comfort and control.
• Avoid Over-Spreading/Over-Compressing: Do not force snap rings beyond their intended expansion or compression limits, as this can damage the snap ring or the tool.
• Mantingueu la zona de treball neta: Ensure your work area is well-lit and free from clutter to prevent accidents.
• Mantenir fora de l'abast dels nens: Store tools safely away from children.

ADVERTIMENT: Aquest producte us pot exposar a substàncies químiques, com ara el plom, que l'estat de Califòrnia sap que causa càncer i defectes de naixement o altres danys reproductius. Per a més informació aneu a www.P65Warnings.ca.gov.

3. Producte acabatview

The Performance Tool W1159 set includes one plier body and four interchangeable jaw tip assemblies, designed for versatility in handling various snap ring types and sizes.

Figura 3.1: The complete Performance Tool W1159 set, showing the main plier body and the four interchangeable jaw assemblies (straight, 45-degree, and 90-degree tips).

Components:

• Plier Body: The main handle assembly with vinyl grips and a spring retainer mechanism.
• Straight Jaw Tips (2 pairs): For general purpose internal and external snap ring removal/installation.
• 45-Degree Angled Jaw Tips (1 pair): For accessing snap rings in confined or angled spaces.
• 90-Degree Angled Jaw Tips (1 pair): For accessing snap rings requiring a perpendicular approach.

4. Setup: Attaching Interchangeable Jaws

The W1159 set features an interchangeable jaw design, allowing you to quickly switch between different tip angles for various applications.

1. Select Jaw Assembly: Choose the appropriate jaw assembly (straight, 45-degree, or 90-degree) based on the snap ring's location and type (internal or external).
2. Align Jaws: Align the pivot hole of the selected jaw assembly with the pivot pin on the plier body.
3. Insert Pivot Pin: Push the pivot pin through the jaw assembly's hole until it is securely seated. The spring retainer helps hold the jaws in place.
4. Verificar la interacció: Gently squeeze and release the plier handles to ensure the jaw assembly pivots smoothly and is firmly attached.

Figura 4.1: Primer pla view of the plier's pivot mechanism, illustrating where the interchangeable jaw assemblies attach.

Note: Some users have reported that the spring retainer may not hold the jaws as securely as desired. Ensure the pivot pin is fully engaged and consider applying gentle pressure to keep the jaws aligned during use.

5. Instruccions de funcionament

This plier set can be configured for both internal and external snap rings.

5.1. For External Snap Rings (Spreading Action)

External snap rings are designed to fit into a groove on the outside of a shaft or pin. To remove or install them, the pliers need to spread the ring open.

1. Configure Pliers: Ensure the jaw tips are positioned to spread apart when the handles are squeezed. This is typically achieved by placing the jaw assembly on the outer set of pins on the plier body.
2. Position Tips: Insert the tips of the pliers into the holes of the external snap ring.
3. Spread Ring: Slowly and carefully squeeze the plier handles to spread the snap ring open.
4. Remove/Install: Once the ring is sufficiently spread, carefully remove it from or install it onto the shaft. Release the handles slowly.

Figura 5.1: Pliers configured for external snap ring removal, demonstrating the spreading action.

5.2. For Internal Snap Rings (Compressing Action)

Internal snap rings are designed to fit into a groove inside a bore or housing. To remove or install them, the pliers need to compress the ring.

1. Configure Pliers: Ensure the jaw tips are positioned to close together when the handles are squeezed. This is typically achieved by placing the jaw assembly on the inner set of pins on the plier body.
2. Position Tips: Insert the tips of the pliers into the holes of the internal snap ring.
3. Compress Ring: Slowly and carefully squeeze the plier handles to compress the snap ring.
4. Remove/Install: Once the ring is sufficiently compressed, carefully remove it from or install it into the bore. Release the handles slowly.

Figura 5.2: Pliers configured for internal snap ring installation, demonstrating the compressing action.

Always ensure the snap ring is fully seated in its groove before releasing tension from the pliers.

6. Manteniment

• Neteja: After each use, wipe the pliers and jaw assemblies clean with a dry cloth to remove dirt, grease, or debris.
• Lubricació: Periodically apply a light coat of machine oil to the pivot points of the pliers and jaw assemblies to ensure smooth operation and prevent rust.
• Emmagatzematge: Store the tool set in a dry environment to prevent corrosion. Keep all jaw assemblies together with the plier body to avoid loss.
• Inspecció: Regularly inspect the jaw tips for wear or bending. Replace damaged jaw assemblies if necessary.

7. Solució De Problemes

8. Especificacions

• Model: W1159
• Marca: Eina de rendiment
• Contingut del conjunt: 1 Plier Body, 4 Interchangeable Jaw Tip Assemblies (Straight, 45-degree, 90-degree)
• Material: Acer d'aliatge
• Material del mànec: Vinil
• Dimensions del producte: Approximately 9.8"L x 4.25"W
• Pes de l'article: Aproximadament 4.8 unces (0.3 lliures)
• Tipus de grip: Ergonòmic
• UPC: 039564112713

9. Informació de la garantia

Performance Tool products are manufactured to high-quality standards. This product is backed by a Lifetime Warranty.

Figura 9.1: Performance Tool Lifetime Warranty emblem.

For specific details regarding warranty coverage, claims, or limitations, please refer to the official Performance Tool warranty policy or contact customer support.

10. Atenció al client

For technical assistance, replacement parts, or warranty inquiries, please contact Performance Tool customer service. Visit the official Performance Tool weblloc web per obtenir la informació de contacte més actualitzada.

També podeu visitar el Performance Tool Store on Amazon per obtenir informació addicional sobre el producte i recursos d'assistència.