Manual d'usuari del provador de bateries analògic Profitec BT 105 A

1. Introducció

The Profitec BT 105 A is an analog battery tester designed to quickly and accurately assess the charge level and condition of various battery types. This manual provides essential information for the safe and effective use of your device, including setup, operation, maintenance, and troubleshooting.

2. Informació de seguretat

• Always handle batteries with care. Do not short-circuit battery terminals.
• Do not attempt to test damaged, leaking, or corroded batteries.
• Mantingueu el dispositiu sec i allunyat de temperatures extremes.
• This device is for testing purposes only and should not be used as a charger.
• Eliminar les bateries esgotades d'acord amb la normativa local.

3. Producte acabatview

The Profitec BT 105 A features an analog meter for clear readings, a rotary selector dial for different battery types, and integrated test leads for versatile testing. It is designed to test batteries under a slight load, providing a more accurate assessment of their remaining capacity.

Imatge 1: The Profitec BT 105 A Analog Battery Tester. The device is black with an analog meter at the top displaying 'REPLACE' and 'GOOD' zones for various battery types. Below the meter is a rotary dial for selecting battery test settings. Red and black test leads with probe tips are attached to the side.

Components:

• Mesurador analògic: Displays battery condition (Good, Replace, Recharge).
• Rotary Selector Dial: Used to select the appropriate battery type and voltage per provar.
• Cables de prova: Integrated red (+) and black (-) leads with probe tips for connecting to battery terminals.
• 9V Battery Contacts: Specific contacts on the device for testing 9V block batteries.

4. Configuració

The Profitec BT 105 A is ready for use directly out of the packaging. No assembly or internal battery installation is required for the tester itself, as it draws power from the battery being tested.

Inspecció inicial:

• Unpack the battery tester and inspect it for any visible damage.
• Ensure the test leads are securely attached and free from fraying.

5. Instruccions de funcionament

Follow these steps to test your batteries:

1. Seleccioneu el tipus de bateria: Rotate the selector dial to match the type and voltage of the battery you wish to test. The available settings are:
   • BUTTON 1.5V 1mA
   • 3V 1mA
   • LITHIUM/AAA 10mA
   • AA 50mA
   • D 250mA
   • 4.5 V
   • 6V
   • 9V
   • 12 V
   • 22.5 V
   • 3V PHOTO
   • 1.5V PHOTO
2. Connecta la bateria:
   • For cylindrical batteries (AAA, AA, C, D) and other small batteries: Use the red (+) and black (-) test leads. Press the red probe tip to the positive terminal of the battery and the black probe tip to the negative terminal. Ensure good contact.
   • For 9V block batteries: Place the battery's terminals directly onto the corresponding contacts on the tester (usually located on the side or top of the device). The flat side of the 9V battery (negative) should align with the negative contact on the tester, and the raised side (positive) with the positive contact.
3. Read the Meter: Observe the analog needle on the display. The meter is divided into colored zones indicating the battery's condition under load:
   • GOOD (Green Zone): The battery has sufficient charge and is in good working condition.
   • REPLACE (Red Zone): The battery is depleted and should be replaced.
   • RECHARGE (Yellow/Orange Zone, for rechargeable types): The rechargeable battery is depleted and needs to be recharged.
   The meter also has specific scales for 'REGULAR' batteries, 'BUTTON CELL-LITHIUM' batteries, and 'NICKEL CADMIUM' (rechargeable) batteries. Ensure you are reading the correct scale for your selected battery type.
4. Desconnecta la bateria: Once the reading is taken, remove the battery from the tester.

Notes importants:

• The tester applies a small load during measurement, which provides a more realistic assessment of battery performance compared to simply measuring open-circuit voltage.
• For optimal accuracy, ensure the test leads make firm contact with the battery terminals.

6. Manteniment

Neteja:

Netegeu el dispositiu amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar el dispositiu.asing o pantalla.

Emmagatzematge:

Store the Profitec BT 105 A in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children.

7. Solució De Problemes

• No Needle Movement: Ensure the battery is correctly connected and the selector dial is set to the appropriate battery type. If testing a completely dead battery, the needle may not move.
• Lectures inconsistents: Check for clean contact points on both the battery and the test leads. Ensure the selector dial is firmly set to the correct position.
• Tester Appears Damaged: Deixeu d'utilitzar-lo immediatament i poseu-vos en contacte amb el servei d'atenció al client.

8. Especificacions

• Model: BT 105 A
• Marca: Profitec
• Tipus de visualització: Mesurador analògic
• Font d'alimentació: Battery-powered (draws power from battery under test)
• Dimensions: Aproximadament 18 x 9.8 x 3.6 cm (7.09 x 3.86 x 1.42 polzades)
• Pes: Aproximadament 140.61 grams (4.96 unces)
• Tipus de bateries compatibles: Regular 1.5V (AAA, AA, C, D), 4.5V, 6V, 9V, 12V, 22.5V, Button Cells, Lithium, Nickel Cadmium, Photo batteries (3V, 1.5V).

9. Garantia i Suport

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Profitec customer service through their official website or authorized distributors. Keep your proof of purchase for warranty claims.