Cadet F Series 72-inch Electric Baseboard Heater

1. Introducció i finalview

This manual provides essential instructions for the safe installation, operation, and maintenance of your Cadet F Series 72-inch Electric Baseboard Heater. This 120-volt, 1500-watt unit is designed for indoor use to provide continuous, quiet convection heat, effectively warming your living spaces.

The Cadet F Series heater is constructed from durable 25-gauge steel with a 20-gauge junction box, featuring a ground connection and a powder-coated finish for longevity. It is a UL Listed heater, ensuring compliance with safety standards.

Un front complet view of the white Cadet F Series 72-inch electric baseboard heater.

2. Informació important de seguretat

ADVERTÈNCIA: Risc d'incendi, descàrrega elèctrica o lesions personals.

• Llegiu totes les instruccions abans d'instal·lar o utilitzar aquest escalfador.
• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains, at least 3 feet (0.9 m) from the front of the heater, and keep them away from the sides and rear.
• Cal extremar la precaució quan l'escalfador és utilitzat per o a prop de nens o persones invàlides i sempre que l'escalfador es deixi en funcionament i sense vigilància.
• No feu funcionar cap escalfador amb un cable o un endoll danyats o després que l'escalfador funcioni malament, s'hagi caigut o s'hagi danyat de cap manera. Torneu l'escalfador a un centre de servei autoritzat per a l'examen, l'ajust elèctric o mecànic o la reparació.
• No utilitzar a l'aire lliure.
• Aquest escalfador no està dissenyat per utilitzar-lo en banys, zones de bugaderia i llocs interiors similars. No ubiqui mai l'escalfador on pugui caure a una banyera o un altre recipient d'aigua.
• No passeu el cable sota la catifa. No cobriu el cable amb catifes, corredors o revestiments similars. Col·loqueu el cable lluny de la zona de trànsit i on no s'ensopegui.
• Per desconnectar l'escalfador, apagueu els controls i, a continuació, traieu l'endoll de la presa.
• Connecteu-vos només a endolls de terra correctament.
• No introduïu ni deixeu que entrin objectes estranys a cap obertura de ventilació o d'escapament, ja que això podria provocar una descàrrega elèctrica o incendi, o danyar l'escalfador.
• Per evitar un possible incendi, no bloquegeu de cap manera les entrades d'aire o l'escapament. No l'utilitzeu en superfícies toves, com un llit, on les obertures es poden bloquejar.
• Un escalfador té parts calentes i amb arcs o espurnes a l'interior. No l'utilitzeu en zones on s'utilitzi o emmagatzemen gasolina, pintura o vapors o líquids inflamables.
• Utilitzeu aquest escalfador només tal com es descriu en aquest manual. Qualsevol altre ús no recomanat pel fabricant pot causar incendi, descàrrega elèctrica o lesions a les persones.
• This heater requires a thermostat for temperature control. Ensure a compatible thermostat is installed.

3. Contingut del paquet

En obrir el paquet, comproveu que tots els components siguin presents i no estiguin danyats:

• One Cadet F Series Electric Baseboard Heater (Model 05536, 120-Volt)
• Manual d'instruccions d'instal·lació i funcionament

4. Instal·lació

Proper installation is crucial for the safe and efficient operation of your baseboard heater. This heater is designed for hard-wired installation and requires a separate thermostat for temperature regulation.

4.1 Triar la ubicació adequada

Consider the following when selecting an installation location:

• Room Size and Wattage: Ensure the heater's wattage (1500W for this model) is appropriate for the room size to provide adequate heating. Refer to the sizing guide image for general recommendations.
• Voltage: This model operates on 120 Volts. Confirm your electrical supply matches this requirement.
• Liquidacions: Maintain a minimum of 3 feet (0.9 m) clearance from combustible materials. Do not install directly below electrical outlets.
• Termostat: A thermostat is required. You can use a wall-mounted thermostat or a compatible built-in thermostat accessory (sold separately).

An informational graphic detailing how to select the appropriate baseboard heater based on room size, voltage requirements (120V or 240V), and thermostat type (wall or built-in, electronic or mechanical).

4.2 Muntatge de l'escalfador

The heater features pre-drilled holes for secure mounting to the wall. Ensure the heater is level and securely fastened to wall studs or with appropriate anchors.

A technical drawing illustrating the length (72 inches / 182.8 cm), height (6-3/4 inches / 17.2 cm), and depth (2-1/2 inches / 6.4 cm) of the baseboard heater.

4.3 Cablejat elèctric

IMPORTANT: All wiring must be performed by a qualified electrician in accordance with national and local electrical codes.

The heater is designed for hard-wired connections. It includes a 20-gauge junction box with ground. The wiring can be routed from either the right or left side of the heater for installation flexibility. Connect the power supply wires to the heater's terminals, ensuring proper grounding.

Un detallat view of the heater's internal wiring compartment, showing the electrical connections and the heating element.

5. Instruccions de funcionament

The Cadet F Series baseboard heater provides quiet, continuous convection heat. It does not use a fan, resulting in silent operation.

• Control del termòstat: This heater requires an external or built-in thermostat (not included) to regulate the room temperature. Set the thermostat to your desired comfort level.
• Calefacció per convecció: The heater warms the air directly above it, which then rises, allowing cooler air to be drawn in from below. This natural circulation provides even heat distribution throughout the room. Allow some time for the room temperature to stabilize after adjusting the thermostat, as convection heating is not instantaneous.
• Funcionament silenciós: Due to its fan-less design, the heater operates silently, making it suitable for bedrooms and other quiet spaces.

An image suggesting the quiet operation of the heater, contributing to a peaceful sleeping environment.

6. Manteniment

Regular maintenance ensures optimal performance and longevity of your heater. Always disconnect power to the heater at the main service panel before performing any maintenance.

• Neteja: Netegeu periòdicament l'exterior de l'escalfador amb un drap suau i sec.amp cloth. Do not use abrasive cleaners or solvents. Ensure the air intake and exhaust openings are free from dust and debris.
• Inspecció: Annually inspect the heater for any signs of damage, loose connections, or unusual wear. If any issues are found, consult a qualified electrician.
• No cal lubricació: The heater does not contain any moving parts that require lubrication.

7. Solució De Problemes

Si el vostre escalfador no funciona correctament, consulteu els següents problemes i solucions habituals:

• L'escalfador no produeix calor:
  • Check the circuit breaker at your main electrical panel.
  • Ensure the thermostat is set to a temperature higher than the current room temperature.
  • Verify all electrical connections are secure (consult a qualified electrician).
• Calor insuficient:
  • Confirm the heater wattage is appropriate for the room size.
  • Check for drafts or poor insulation in the room.
  • Ensure no objects are blocking the air intake or exhaust vents.
• Olor inusual:
  • A slight odor may occur during initial use as manufacturing oils burn off. This is normal and should dissipate quickly.
  • If a strong or persistent burning odor is present, immediately disconnect power and contact a qualified electrician.

For issues not resolved by these steps, contact Cadet customer support or a qualified electrician.

8. Especificacions

9. Garantia i Suport

For specific warranty information, including coverage details and duration, please refer to the documentation included with your product or visit the official Cadet Manufacturing website. For technical support, replacement parts, or service inquiries, please contact Cadet customer service directly.

Always ensure to have your model number (6F1500-1W) and part number (05536) available when contacting support.