1. Introducció
This manual provides essential information for the proper use, care, and maintenance of your Armstrong 303B Flute. Please read these instructions carefully to ensure optimal performance and longevity of your instrument. The Armstrong 303B Flute features a silver head, silver-plated body and foot, hand-mounted silver-plated keys with French pointed cup arms, a hand-cut embouchure hole, and a B Foot with 10k gold springs.
2. Producte acabatview
The Armstrong 303B Flute consists of three main parts:
- Headjoint: The top section where the embouchure hole is located.
- Cos: The longest middle section containing most of the keys.
- Footjoint: The shortest section, typically with C or B keys. The 303B model includes a B Foot.
Figura 2.1: The Armstrong 303B Flute, disassembled into its headjoint, body, and footjoint, resting in its protective case. This image illustrates the primary components of the instrument.
3. Muntatge i muntatge
Follow these steps to properly assemble your flute:
- Manejar amb cura: Always hold the flute by its barrel sections, avoiding pressure on the keys.
- Attach Footjoint: Gently twist the footjoint onto the body, aligning the rod on the footjoint with the center of the lowest key on the body. Do not force it.
- Attach Headjoint: Gently twist the headjoint onto the body. Align the embouchure hole with the first key on the body.
- Comprova l'alineació: Ensure all sections are securely connected and keys operate freely.
4. Instruccions de funcionament
4.1 Holding the Flute
Hold the flute horizontally, parallel to the floor. Your left hand supports the flute closer to the headjoint, and your right hand supports it closer to the footjoint. Ensure your fingers are curved and relaxed over the keys.
4.2 Producing Sound (Embouchure)
Place the lip plate against your chin, just below your lower lip. Direct a focused stream of air across the embouchure hole, similar to blowing across the top of a bottle. Experiment with lip tension and air direction to produce a clear tone.
4.3 Fingerings
Refer to a standard flute fingering chart for specific notes. Pressing keys closes tone holes, altering the pitch. Ensure keys are pressed firmly to create an airtight seal.
5. Manteniment i cura
5.1 Neteja diària
- Swabbing: After each use, swab the inside of the flute with a cleaning rod and a soft, lint-free cloth (e.g., silk swab) to remove moisture.
- Exterior: Gently wipe the exterior of the flute with a soft polishing cloth to remove fingerprints and oils. Avoid touching the pads.
5.2 Emmagatzematge
Always disassemble the flute and store it in its original protective case when not in use. This prevents damage and keeps dust away from the keys and pads. Store the case in a stable environment, away from extreme temperatures or humidity.
5.3 Manteniment periòdic
- Coixinets: If pads become sticky, gently clean them with a piece of cigarette paper or a specialized pad cleaning paper.
- Lubricació: Joint corks may occasionally need a very small amount of cork grease to ensure smooth assembly.
- Servei professional: It is recommended to have your flute professionally serviced by a qualified technician annually to ensure proper adjustment and prevent major issues.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No sound or airy sound | Incorrect embouchure, air leak, or dirty pads. | Adjust embouchure, check for bent keys or worn pads, clean pads. |
| Tecles enganxades | Sticky pads due to moisture or dirt. | Clean pads with cleaning paper. If persistent, seek professional help. |
| Difficulty assembling/disassembling | Joints are dry or dirty, or misaligned. | Apply a small amount of cork grease to the tenons. Ensure correct alignment. |
7. Especificacions
- Model: Armstrong 303B
- Headjoint Material: Silver (.014" thickness)
- Body & Footjoint Material: Silver Plated (.016" thickness)
- Key Material: Hand-mounted silver-plated keys with French pointed cup arms
- Molles: Or de 10 quirats
- Footjoint Type: Peu B
- Embouchure Hole: Hand-cut
- ASIN: B000T06H08
Figura 7.1: Un example of product identification, showing the model "Armstrong 303B" and a serial/SKU number. This confirms the specific model of the instrument.
8. Garantia i Suport
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Armstrong musical instruments weblloc web. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.
For further assistance, you may contact Armstrong customer service directly through their official channels. Always ensure any repairs or adjustments are performed by certified technicians to maintain warranty validity and instrument integrity.
