Lexon On/Off 3 Position LCD Alarm Clock LR98-B User Manual

Introducció

Gràcies per la compraasing the Lexon On/Off 3 Position LCD Alarm Clock, model LR98-B. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

Contingut del paquet

• Lexon On/Off 3 Position LCD Alarm Clock (LR98-B)
• Piles AAA x 2
• Manual d'usuari (aquest document)

Producte acabatview

The Lexon LR98-B is a unique digital alarm clock designed for intuitive use. Its innovative "on/off" mechanism allows you to activate or deactivate the alarm simply by rotating the clock to one of its three positions. The clear LCD display shows the time, and an EL backlight provides visibility in low-light conditions.

This image displays the Lexon On/Off 3 Position LCD Alarm Clock, model LR98-B, in its black finish. The clock is shown in an angled position, with the digital display clearly visible, indicating '12:30 PM'. The unique 'on/off' design is evident in its angled structure, where rotating the clock changes its operational state.

Configuració

1. Instal·lació de la bateria

1. Localitza la tapa del compartiment de les piles a la part posterior del despertador.
2. Traieu la coberta fent-la lliscar o fent-la palanca suaument per obrir-la.
3. Introduïu dues (2) piles AAA, assegurant-vos de la polaritat correcta (+ i -) tal com s'indica a l'interior del compartiment.
4. Col·loqueu la coberta del compartiment de la bateria amb seguretat.

2. Engegada inicial

Once batteries are installed, the LCD display should activate. If not, check battery placement or replace with fresh batteries.

Instruccions de funcionament

The Lexon LR98-B features a unique "on/off" function controlled by its physical orientation. The clock has buttons on the back for setting time and alarm.

Establiment de l'hora

1. Locate the time setting buttons on the back of the clock (usually labeled "SET" or "TIME" and "+" / "-").
2. Press and hold the "SET" or "TIME" button until the hour digits begin to flash.
3. Use the "+" and "-" buttons to adjust the hour. Pay attention to the AM/PM indicator if present.
4. Press the "SET" or "TIME" button again to move to the minute setting.
5. Feu servir els botons "+" i "-" per ajustar els minuts.
6. Press "SET" or "TIME" one last time to confirm and exit time setting mode.

Configuració de l'Alarma

1. Locate the alarm setting buttons on the back of the clock (usually labeled "ALARM" and "+" / "-").
2. Press and hold the "ALARM" button until the alarm hour digits begin to flash.
3. Feu servir els botons "+" i "-" per ajustar l'hora de l'alarma.
4. Press the "ALARM" button again to move to the alarm minute setting.
5. Feu servir els botons "+" i "-" per ajustar els minuts de l'alarma.
6. Press "ALARM" one last time to confirm and exit alarm setting mode.

Using the On/Off Function

The Lexon LR98-B features a unique physical on/off switch. The clock has three positions:

• Alarm ON Position: When the clock is oriented in a specific way (e.g., with "ON" facing upwards or a designated side), the alarm function is active. A small indicator (e.g., an alarm icon) may appear on the display.
• Alarm OFF Position: When the clock is rotated to another specific orientation (e.g., with "OFF" facing upwards or a different designated side), the alarm function is deactivated. The alarm indicator will disappear from the display.
• Time Display Position: A third position might exist for simply displaying the time without alarm functionality being explicitly on or off, or it might be a neutral position. Refer to the markings on your specific device.

To activate or deactivate the alarm, simply rotate the clock to the desired position. The display will visually confirm the alarm status.

Contrallum EL

To illuminate the display in dark conditions, press the "EL" button located on the back of the clock. The backlight will typically stay on for approximately 3 seconds.

Hourly Time Signal (Chime)

The clock is equipped with an hourly time signal function. To activate or deactivate this feature, refer to the specific button or combination of buttons on the back of your device, often labeled "CHIME" or integrated with the "SET" button. Consult the markings on your clock for precise control.

Manteniment

• Neteja: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or display.
• Substitució de la bateria: Replace batteries when the display dims or the clock functions become erratic. Always replace both batteries simultaneously with new AAA batteries.
• Emmagatzematge: Si guardeu el rellotge durant un període prolongat, traieu-ne les piles per evitar fuites.
• Medi ambient: Avoid exposing the clock to extreme temperatures, direct sunlight, high humidity, or strong magnetic fields.

Resolució de problemes

Especificacions

• Model: LR98-B (Manufacturer Model Number: 2910200 LR98-B)
• Marca: Lexon
• Tipus de visualització: LCD digital
• Font d'alimentació: 2 x piles AAA
• Material: ABS (acrilonitril butadiè estirè)
• Dimensions (L x P x A): 5.3 x 1.4 x 3.1 polzades (13.5 x 3.5 x 8 cm)
• Pes: 0.13 kg (4.6 unces)
• Característiques especials: On/Off 3 Position Function, EL Backlight, Hourly Senyal horari
• Tipus de muntatge: Taula
• País d'origen: Xina

Garantia i Suport

Lexon products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your purchase or visit the official Lexon weblloc web. Si us plau, conserveu el comprovant de compra per a qualsevol reclamació de garantia.

For further assistance, you may contact Lexon customer support through their official channels.