Introducció
This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your Thorens TD295 MK IV Black Semi-Automatic Turntable. Please read these instructions carefully before using your turntable to ensure optimal performance and longevity.
Image: The Thorens TD295 MK IV Black Semi-Automatic Turntable, showcasing its elegant design with the dust cover in an open position.
Configuració
Careful setup is crucial for the best audio experience. Follow these steps to prepare your turntable for use:
- Desembalatge: Carefully remove all components from the packaging. Ensure all items listed in the "Scope of Delivery" are present: mains adapter, acrylic dust cover, RCA interconnects, and this operating manual.
- Col·locació: Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong vibrations.
- Platter and Belt Installation:
- Gently place the platter onto the spindle.
- Locate the internal flat drive belt. Carefully stretch the belt around the motor pulley and the inner rim of the platter.
- Funda antipols: Attach the acrylic dust cover to the hinges at the rear of the turntable.
- Cartridge and Tonearm: The AT-95E pick-up cartridge is pre-installed on the THORENS TP 41 tonearm.
- Equilibrar el braç: Ajusteu el contrapès de la part posterior del braç fins que el braç surti lliurement i horitzontalment.
- Estableix la força de seguiment: Refer to the cartridge manufacturer's recommendations (typically 1.5-2.5 grams for the AT-95E). Rotate the counterweight's numbered ring to the desired tracking force.
- Set Anti-skating: Adjust the anti-skating mechanism (by weight) to match the set tracking force.
- Connectivitat: Connect the RCA interconnects from the turntable's output to the appropriate input on your amplifier or receiver. Ensure the ground wire is connected to your amplifier's ground terminal to minimize hum.
- Connexió d'alimentació: Connect the mains adapter to the turntable and then to a power outlet.
Instruccions de funcionament
Your Thorens TD295 MK IV is a semi-automatic turntable, offering ease of use with precise control.
- Encès: Assegureu-vos que el tocadiscos estigui connectat a l'alimentació.
- Place a Record: Col·loca amb cura el disc de vinil al plat.
- Seleccioneu la velocitat: Use the electronic speed selector to choose between 33-1/3 RPM for LPs or 45 RPM for singles.
- Inicia la reproducció: Move the tonearm over the desired starting groove of the record. The semi-automatic mechanism will gently lower the tonearm onto the record.
- Apagat automàtic: At the end of the record, the mechanical automatic shut-off feature will lift the tonearm and return it to its rest position, then stop the platter rotation.
- Parada manual: To stop playback manually, gently lift the tonearm using the cueing lever and return it to its rest.
Manteniment
Regular maintenance will help preserve the sound quality and lifespan of your turntable.
- Funda antipols: Keep the dust cover closed when the turntable is not in use to prevent dust accumulation. Clean the acrylic dust cover with a soft, damp tela. Eviteu els netejadors abrasius.
- Neteja del llapis: Netegeu periòdicament el llapis amb un raspall suau dissenyat per a la neteja del llapis, raspallant suaument de darrere cap endavant.
- Neteja de discos: Use a carbon fiber brush or a dedicated record cleaning solution to keep your vinyl records free of dust and static.
- Platter and Belt: Occasionally inspect the drive belt for wear and tear. Clean the platter and plinth with a soft, dry cloth.
Resolució de problemes
If you encounter issues with your turntable, consult this section before seeking professional service.
- Sense so:
- Check all cable connections (RCA, power) to ensure they are secure.
- Verifica el teu amplifier/receiver is set to the correct input.
- Ensure the stylus is properly seated in the cartridge and not damaged.
- Soroll de brunzit:
- Assegureu-vos que el cable de terra estigui connectat correctament entre el tocadiscos i el vostre amplificador/receptor.
- Check for interference from other electronic devices; try moving them further away.
- Saltant:
- Clean the record and stylus.
- Verify the tracking force and anti-skating settings are correct.
- Ensure the turntable is on a stable, level surface.
- Velocitat incorrecta:
- Confirm the correct speed (33-1/3 or 45 RPM) is selected for the record being played.
- Inspect the drive belt for proper placement and condition.
Especificacions
| Característica | Detall |
|---|---|
| Funcionament | Semiautomàtic |
| Sistema d'accionament | Internal flat drive belt |
| Motor | Electronically controlled AC synchronous motor |
| Velocitats | 33-1/3, 45 rpm |
| Selecció de velocitat | Electrònicament |
| Plat | 12" / 2.3 kg |
| Braç de to | THORENS TP 41 |
| Pick-up Cartridge | AT-95E |
| Anti-skating (Bias) | Per pes |
| Apagat automàtic | Mecànicament |
| Cable Capacitance | 160 pF |
| Font d'alimentació | External mains adaptor (115-230 V / 50-60 Hz depending on type) |
| Dimensions (A x A x P) | 430 x 145 x 365 mm (16.93 x 5.71 x 14.37 polzades) |
| Pes | 8.5 kg (14.3 lliures) |
| Acabar | Black piano lacquer |
| Components inclosos | Mains adapter, dust cover (acrylic), RCA interconnects, operating instructions |
Garantia i Suport
Your Thorens TD295 MK IV Turntable is covered by a manufacturer's warranty. Please refer to the warranty card included in your packaging for specific terms and conditions.
For technical support, service, or further inquiries, please contact Thorens customer service through their official weblloc web o la informació de contacte que es proporciona a la documentació de la garantia.
